← Katalog
Pas lo zimaz pour agrandi
562
Twist drill long
Twist drill long. Designation: Twist drill long, Diameter range: 2.400 mm – 5.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093178181, Cutting material: HSS, Surface: bright, Type: N, Standard: DIN 340, Point angle: 118, Tolerance class nominal diameter: h8, Cutting direction: Right-hand
Spesifikasyon teknik
- EAN
- 4031093178181
- Type
- N
- Surface
- bright
- Standard
- DIN 340
- Designation
- Twist drill long
- Point angle
- 118
- Diameter range
- 2.400 mm – 5.050 mm
- Cutting material
- HSS
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Tolerance class nominal diameter
- h8
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 562 3.500 | 73.00 mm | 39.00 mm | 112.00 mm | 3.50 mm | 3.50 mm | Lo demann | |
| 562 3.800 | 78.00 mm | 41.00 mm | 119.00 mm | 3.80 mm | 3.80 mm | Lo demann | |
| 562 3.850 | 78.00 mm | 41.00 mm | 119.00 mm | 3.85 mm | 3.85 mm | Lo demann | |
| 562 4.000 | 78.00 mm | 41.00 mm | 119.00 mm | 4.00 mm | 4.00 mm | Lo demann | |
| 562 4.500 | 82.00 mm | 44.00 mm | 126.00 mm | 4.50 mm | 4.50 mm | Lo demann | |
| 562 3.250 | 69.00 mm | 37.00 mm | 106.00 mm | 3.25 mm | 3.25 mm | Lo demann | |
| 562 2.950 | 66.00 mm | 34.00 mm | 100.00 mm | 2.95 mm | 2.95 mm | Lo demann | |
| 562 3.000 | 66.00 mm | 34.00 mm | 100.00 mm | 3.00 mm | 3.00 mm | Lo demann | |
| 562 4.100 | 78.00 mm | 41.00 mm | 119.00 mm | 4.10 mm | 4.10 mm | Lo demann | |
| 562 4.200 | 78.00 mm | 41.00 mm | 119.00 mm | 4.20 mm | 4.20 mm | Lo demann | |
| 562 3.300 | 69.00 mm | 37.00 mm | 106.00 mm | 3.30 mm | 3.30 mm | Lo demann | |
| 562 2.400 | 62.00 mm | 33.00 mm | 95.00 mm | 2.40 mm | 2.40 mm | Lo demann | |
| 562 3.200 | 69.00 mm | 37.00 mm | 106.00 mm | 3.20 mm | 3.20 mm | Lo demann | |
| 562 4.650 | 82.00 mm | 44.00 mm | 126.00 mm | 4.65 mm | 4.65 mm | Lo demann | |
| 562 3.100 | 69.00 mm | 37.00 mm | 106.00 mm | 3.10 mm | 3.10 mm | Lo demann | |
| 562 5.000 | 87.00 mm | 45.00 mm | 132.00 mm | 5.00 mm | 5.00 mm | Lo demann | |
| 562 4.850 | 87.00 mm | 45.00 mm | 132.00 mm | 4.85 mm | 4.85 mm | Lo demann |