← Katalog
Pas lo zimaz pour agrandi
3580
Woodruff cutter
Woodruff cutter. Designation: Woodruff cutter, Diameter range: 4.500 mm – 45.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093384131, Cutting material: HSCO, Surface: bright, Type: N, Helix angle: 8, Back rake angle: 6, Number of cutting edges range (from/to): 6-12, Type of machine interface: B, Corner design: Schneidecke 90°, Feed direction: lateral
Spesifikasyon teknik
- EAN
- 4031093384131
- Type
- N
- Surface
- bright
- Designation
- Woodruff cutter
- Helix angle
- 8
- Corner design
- Schneidecke 90°
- Diameter range
- 4.500 mm – 45.500 mm
- Feed direction
- lateral
- Back rake angle
- 6
- Cutting material
- HSCO
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Type of machine interface
- B
- Number of cutting edges range (from/to)
- 6-12
Dimansyon ek kod komann
| Kod komann | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponibilite | Demann pri |
|---|---|---|---|---|---|---|---|
| 3580 16.502 | 5.00 mm | 40.00 mm | 56.00 mm | 10.00 mm | 16.50 mm | Lo demann | |
| 3580 16.500 | 3.00 mm | 40.00 mm | 56.00 mm | 10.00 mm | 16.50 mm | Lo demann | |
| 3580 25.500 | 6.00 mm | 40.00 mm | 63.00 mm | 10.00 mm | 25.50 mm | Lo demann | |
| 3580 22.501 | 6.00 mm | 40.00 mm | 63.00 mm | 10.00 mm | 22.50 mm | Lo demann | |
| 3580 7.500 | 1.50 mm | 36.00 mm | 50.00 mm | 6.00 mm | 7.50 mm | Lo demann | |
| 3580 19.502 | 6.00 mm | 40.00 mm | 63.00 mm | 10.00 mm | 19.50 mm | Lo demann | |
| 3580 28.500 | 6.00 mm | 40.00 mm | 63.00 mm | 10.00 mm | 28.50 mm | Lo demann | |
| 3580 19.500 | 4.00 mm | 40.00 mm | 63.00 mm | 10.00 mm | 19.50 mm | Lo demann | |
| 3580 7.501 | 2.00 mm | 36.00 mm | 50.00 mm | 6.00 mm | 7.50 mm | Lo demann | |
| 3580 28.501 | 8.00 mm | 40.00 mm | 63.00 mm | 10.00 mm | 28.50 mm | Lo demann | |
| 3580 32.501 | 10.00 mm | 45.00 mm | 71.00 mm | 12.00 mm | 32.50 mm | Lo demann | |
| 3580 10.502 | 3.00 mm | 36.00 mm | 50.00 mm | 6.00 mm | 10.50 mm | Lo demann | |
| 3580 19.501 | 5.00 mm | 40.00 mm | 63.00 mm | 10.00 mm | 19.50 mm | Lo demann | |
| 3580 10.501 | 2.50 mm | 36.00 mm | 50.00 mm | 6.00 mm | 10.50 mm | Lo demann | |
| 3580 28.502 | 10.00 mm | 45.00 mm | 71.00 mm | 12.00 mm | 28.50 mm | Lo demann | |
| 3580 22.500 | 5.00 mm | 40.00 mm | 63.00 mm | 10.00 mm | 22.50 mm | Lo demann | |
| 3580 45.500 | 10.00 mm | 45.00 mm | 71.00 mm | 12.00 mm | 45.50 mm | Lo demann | |
| 3580 10.500 | 2.00 mm | 36.00 mm | 50.00 mm | 6.00 mm | 10.50 mm | Lo demann | |
| 3580 16.501 | 4.00 mm | 40.00 mm | 56.00 mm | 10.00 mm | 16.50 mm | Lo demann | |
| 3580 4.500 | 1.00 mm | 36.00 mm | 50.00 mm | 6.00 mm | 4.50 mm | Lo demann | |
| 3580 13.501 | 4.00 mm | 40.00 mm | 56.00 mm | 10.00 mm | 13.50 mm | Lo demann | |
| 3580 13.500 | 3.00 mm | 40.00 mm | 56.00 mm | 10.00 mm | 13.50 mm | Lo demann | |
| 3580 32.500 | 8.00 mm | 45.00 mm | 71.00 mm | 12.00 mm | 32.50 mm | Lo demann | |
| 3580 22.502 | 8.00 mm | 40.00 mm | 63.00 mm | 10.00 mm | 22.50 mm | Lo demann |