Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093382014, Cutting material: M42, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 11, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: B, Feed direction: with drilling

المواصفات الفنية

EAN: 4031093382014
Type: N
Surface: bright
Designation: Ball nose slot drill (2-fluted)
Helix angle: 30
Diameter range: 3.000 mm – 30.000 mm
Feed direction: with drilling
Back rake angle: 11
Cutting material: M42
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: B
Number of cutting edges range (from/to): 2

الأبعاد ورموز الطلب

رمز الطلب	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	التوفر
3467 10.000	37.00 mm	40.00 mm	95.00 mm	10.00 mm	10.00 mm	عند الطلب
3467 3.000	13.00 mm	36.00 mm	56.00 mm	6.00 mm	3.00 mm	عند الطلب
3467 24.000	76.00 mm	56.00 mm	166.00 mm	25.00 mm	24.00 mm	عند الطلب
3467 5.000	21.00 mm	36.00 mm	68.00 mm	6.00 mm	5.00 mm	عند الطلب
3467 18.000	52.00 mm	48.00 mm	123.00 mm	16.00 mm	18.00 mm	عند الطلب
3467 7.000	27.00 mm	40.00 mm	80.00 mm	10.00 mm	7.00 mm	عند الطلب
3467 14.000	44.00 mm	45.00 mm	110.00 mm	12.00 mm	14.00 mm	عند الطلب
3467 4.000	18.00 mm	36.00 mm	63.00 mm	6.00 mm	4.00 mm	عند الطلب
3467 8.000	32.00 mm	40.00 mm	88.00 mm	10.00 mm	8.00 mm	عند الطلب
3467 20.000	63.00 mm	50.00 mm	141.00 mm	20.00 mm	20.00 mm	عند الطلب
3467 6.000	21.00 mm	36.00 mm	68.00 mm	6.00 mm	6.00 mm	عند الطلب
3467 16.000	52.00 mm	48.00 mm	123.00 mm	16.00 mm	16.00 mm	عند الطلب
3467 12.000	44.00 mm	45.00 mm	110.00 mm	12.00 mm	12.00 mm	عند الطلب