End mill CR 200 for fibre-reinforced plastics

End mill CR 200 for fibre-reinforced plastics. Designation: End mill CR 200 for fibre-reinforced plastics, Diameter range: 4.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4069941022645, Indicator new/addition: New, Cutting material: Solid carbide, Surface: Cristall M, Product family: CR 200, Helix angle: 5, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Feed direction: with drilling

المواصفات الفنية

EAN: 4069941022645
Surface: Cristall M
Designation: End mill CR 200 for fibre-reinforced plastics
Helix angle: 5
Diameter range: 4.000 mm – 12.700 mm
Feed direction: with drilling
Product family: CR 200
Back rake angle: 10
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Indicator new/addition: New
Number of cutting edges range (from/to): 6-8

الأبعاد ورموز الطلب

رمز الطلب	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	التوفر
6930 12.000	45.01 mm	45.00 mm	93.00 mm	12.00 mm	12.00 mm	عند الطلب
6930 10.000	41.83 mm	40.00 mm	85.00 mm	10.00 mm	10.00 mm	عند الطلب
6930 4.000	20.90 mm	36.00 mm	66.00 mm	6.00 mm	4.00 mm	عند الطلب
6930 8.000	36.05 mm	36.00 mm	75.00 mm	8.00 mm	8.00 mm	عند الطلب
6930 6.000	28.16 mm	36.00 mm	70.00 mm	6.00 mm	6.00 mm	عند الطلب
6930 9.525	37.50 mm	36.00 mm	76.00 mm	9.53 mm	9.53 mm	عند الطلب
6930 6.350	28.81 mm	35.00 mm	70.00 mm	6.35 mm	6.35 mm	عند الطلب
6930 4.762	21.10 mm	35.00 mm	63.50 mm	6.35 mm	4.76 mm	عند الطلب
6930 12.700	40.50 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	عند الطلب