End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093388641, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: short, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling

Tehnične specifikacije

EAN: 4031093388641
Type: N
Designation: End mill (4-fluted)
Helix angle: 30
Diameter range: 2.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: short
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Dimenzije in naročniške kode

Naročniška koda	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Razpoložljivost
3721 6.000	16.00 mm	36.00 mm	54.00 mm	6.00 mm	6.00 mm	Po povpraševanju
3721 16.000	36.72 mm	48.00 mm	82.00 mm	16.00 mm	16.00 mm	Po povpraševanju
3721 3.000	8.00 mm	36.00 mm	50.00 mm	6.00 mm	3.00 mm	Po povpraševanju
3721 8.000	20.00 mm	36.00 mm	58.00 mm	8.00 mm	8.00 mm	Po povpraševanju
3721 10.000	24.00 mm	40.00 mm	66.00 mm	10.00 mm	10.00 mm	Po povpraševanju
3721 4.000	12.00 mm	36.00 mm	54.00 mm	6.00 mm	4.00 mm	Po povpraševanju
3721 2.000	6.00 mm	36.00 mm	50.00 mm	6.00 mm	2.00 mm	Po povpraševanju
3721 5.000	14.00 mm	36.00 mm	54.00 mm	6.00 mm	5.00 mm	Po povpraševanju
3721 20.000	44.40 mm	50.00 mm	92.00 mm	20.00 mm	20.00 mm	Po povpraševanju
3721 14.000	30.88 mm	45.00 mm	75.00 mm	14.00 mm	14.00 mm	Po povpraševanju
3721 12.000	27.04 mm	45.00 mm	73.00 mm	12.00 mm	12.00 mm	Po povpraševanju