← Katalog
Pomaknite miško nad sliko za povečavo
3012
End mill XL (4-fluted)
End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093364638, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°
Tehnične specifikacije
- EAN
- 4031093364638
- Type
- N
- Surface
- bright
- Designation
- End mill XL (4-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 3.000 mm – 20.000 mm
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- extra long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
Dimenzije in naročniške kode
| Naročniška koda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Razpoložljivost | Povpraševanje za ceno |
|---|---|---|---|---|---|---|---|
| 3012 14.000 | 57.88 mm | 45.00 mm | 150.00 mm | 14.00 mm | 14.00 mm | Po povpraševanju | |
| 3012 14.001 | 77.88 mm | 48.00 mm | 150.00 mm | 16.00 mm | 14.00 mm | Po povpraševanju | |
| 3012 18.001 | 81.56 mm | 50.00 mm | 150.00 mm | 20.00 mm | 18.00 mm | Po povpraševanju | |
| 3012 6.000 | 36.00 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | Po povpraševanju | |
| 3012 12.000 | 56.04 mm | 45.00 mm | 150.00 mm | 12.00 mm | 12.00 mm | Po povpraševanju | |
| 3012 8.000 | 48.00 mm | 36.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | Po povpraševanju | |
| 3012 16.000 | 79.72 mm | 48.00 mm | 151.00 mm | 16.00 mm | 16.00 mm | Po povpraševanju | |
| 3012 5.000 | 35.00 mm | 28.00 mm | 75.00 mm | 5.00 mm | 5.00 mm | Po povpraševanju | |
| 3012 20.000 | 83.40 mm | 50.00 mm | 150.00 mm | 20.00 mm | 20.00 mm | Po povpraševanju | |
| 3012 4.000 | 29.00 mm | 28.00 mm | 75.00 mm | 4.00 mm | 4.00 mm | Po povpraševanju | |
| 3012 18.000 | 81.56 mm | 48.00 mm | 150.00 mm | 18.00 mm | 18.00 mm | Po povpraševanju | |
| 3012 10.000 | 50.00 mm | 40.00 mm | 100.00 mm | 10.00 mm | 10.00 mm | Po povpraševanju | |
| 3012 3.000 | 23.00 mm | 28.00 mm | 75.00 mm | 3.00 mm | 3.00 mm | Po povpraševanju |