HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844394902, Cutting material: Solid carbide, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

Tehnične specifikacije

EAN: 4049844394902
Type: N
Designation: HPC end mills (4-fluted)
Helix angle: 35/38
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Dimenzije in naročniške kode

Naročniška koda	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Razpoložljivost
19940 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Po povpraševanju
19940 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Po povpraševanju
19940 14.000	35.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Po povpraševanju
19940 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Po povpraševanju
19940 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Po povpraševanju
19940 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Po povpraševanju
19940 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Po povpraševanju
19940 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Po povpraševanju
19940 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Po povpraševanju
19940 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Po povpraševanju