HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844216631, Cutting material: Solid carbide, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling

Tehnične specifikacije

EAN: 4049844216631
Type: N
Designation: HPC end mills (4-fluted)
Helix angle: 35/38
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Dimenzije in naročniške kode

Naročniška koda	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Razpoložljivost
19981 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Po povpraševanju
19981 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Po povpraševanju
19981 14.000	35.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Po povpraševanju
19981 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Po povpraševanju
19981 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Po povpraševanju
19981 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Po povpraševanju
19981 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Po povpraševanju
19981 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Po povpraševanju
19981 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Po povpraševanju
19981 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Po povpraševanju