← Katalog
Pomaknite miško nad sliko za povečavo
3311
Multi-tooth end mill GH 100 U
Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093717687, Cutting material: Solid carbide, Surface: bright, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 6-10, Type of machine interface: HA
Tehnične specifikacije
- EAN
- 4031093717687
- Type
- N
- Surface
- bright
- Designation
- Multi-tooth end mill GH 100 U
- Helix angle
- 45
- Diameter range
- 3.000 mm – 25.000 mm
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 6-10
Dimenzije in naročniške kode
| Naročniška koda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Razpoložljivost | Povpraševanje za ceno |
|---|---|---|---|---|---|---|---|
| 3311 4.000 | 12.60 mm | 36.00 mm | 57.00 mm | 6.00 mm | 4.00 mm | Po povpraševanju | |
| 3311 5.000 | 15.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Po povpraševanju | |
| 3311 8.000 | 22.20 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Po povpraševanju | |
| 3311 20.000 | 44.60 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Po povpraševanju | |
| 3311 6.000 | 15.40 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Po povpraševanju | |
| 3311 3.000 | 9.20 mm | 36.00 mm | 57.00 mm | 6.00 mm | 3.00 mm | Po povpraševanju | |
| 3311 18.001 | 43.94 mm | 50.00 mm | 104.00 mm | 20.00 mm | 18.00 mm | Po povpraševanju | |
| 3311 12.000 | 30.80 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Po povpraševanju | |
| 3311 18.000 | 37.94 mm | 48.00 mm | 92.00 mm | 18.00 mm | 18.00 mm | Po povpraševanju | |
| 3311 16.000 | 38.40 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Po povpraševanju | |
| 3311 14.000 | 31.60 mm | 45.00 mm | 83.00 mm | 14.00 mm | 14.00 mm | Po povpraševanju | |
| 3311 14.001 | 37.60 mm | 48.00 mm | 92.00 mm | 16.00 mm | 14.00 mm | Po povpraševanju | |
| 3311 10.000 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Po povpraševanju | |
| 3311 25.000 | 53.25 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | Po povpraševanju |