← Katalog
Pomaknite miško nad sliko za povečavo
3365
Roughing end mill GS 100 U(fine teeth)
Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4031093675673, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling
Tehnične specifikacije
- EAN
- 4031093675673
- Type
- N
- Designation
- Roughing end mill GS 100 U(fine teeth)
- Helix angle
- 30
- Diameter range
- 6.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 4
Dimenzije in naročniške kode
| Naročniška koda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Razpoložljivost | Povpraševanje za ceno |
|---|---|---|---|---|---|---|---|
| 3365 12.000 | 35.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Po povpraševanju | |
| 3365 16.000 | 44.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Po povpraševanju | |
| 3365 8.000 | 25.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Po povpraševanju | |
| 3365 20.000 | 52.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Po povpraševanju | |
| 3365 10.000 | 30.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Po povpraševanju | |
| 3365 6.000 | 19.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Po povpraševanju |