← Katalog
Pomaknite miško nad sliko za povečavo
19965
Roughing end mill with fine teeth
Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"full"}], EAN: 4049844199149, Cutting material: Solid carbide, Type: H, Helix angle: 20, Length picto milling: short, Number of cutting edges range (from/to): 3-4, Type of machine interface: HB
Tehnične specifikacije
- EAN
- 4049844199149
- Type
- H
- Designation
- Roughing end mill with fine teeth
- Helix angle
- 20
- Diameter range
- 4.000 mm – 20.000 mm
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"full"}]
- Length picto milling
- short
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 3-4
Dimenzije in naročniške kode
| Naročniška koda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Razpoložljivost | Povpraševanje za ceno |
|---|---|---|---|---|---|---|---|
| 19965 20.000 | 33.00 mm | 50.00 mm | 92.00 mm | 20.00 mm | 20.00 mm | Po povpraševanju | |
| 19965 10.000 | 21.00 mm | 40.00 mm | 66.00 mm | 10.00 mm | 10.00 mm | Po povpraševanju | |
| 19965 16.000 | 31.00 mm | 48.00 mm | 82.00 mm | 16.00 mm | 16.00 mm | Po povpraševanju | |
| 19965 5.000 | 13.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | 5.00 mm | Po povpraševanju | |
| 19965 8.000 | 17.50 mm | 36.00 mm | 58.00 mm | 8.00 mm | 8.00 mm | Po povpraševanju | |
| 19965 4.000 | 12.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | 4.00 mm | Po povpraševanju | |
| 19965 6.000 | 14.00 mm | 36.00 mm | 54.00 mm | 6.00 mm | 6.00 mm | Po povpraševanju | |
| 19965 12.000 | 26.00 mm | 45.00 mm | 73.00 mm | 12.00 mm | 12.00 mm | Po povpraševanju |