← Katalog
Pomaknite miško nad sliko za povečavo
3522
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844018419, Cutting material: Solid carbide, Product family: RF 100 U, Type: H, Helix angle: 30/32, Back rake angle: 4, Length picto milling: 3xD, Number of cutting edges range (from/to): 4, Type of machine interface: HB
Tehnične specifikacije
- EAN
- 4049844018419
- Type
- H
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 30/32
- Diameter range
- 6.000 mm – 20.000 mm
- Product family
- RF 100 U
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- 3xD
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 4
Dimenzije in naročniške kode
| Naročniška koda | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Razpoložljivost | Povpraševanje za ceno |
|---|---|---|---|---|---|---|---|
| 3522 8.000 | 29.00 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | Po povpraševanju | |
| 3522 10.000 | 36.00 mm | 40.00 mm | 80.00 mm | 10.00 mm | 10.00 mm | Po povpraševanju | |
| 3522 20.000 | 72.00 mm | 50.00 mm | 126.00 mm | 20.00 mm | 20.00 mm | Po povpraševanju | |
| 3522 6.000 | 23.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | Po povpraševanju | |
| 3522 12.000 | 44.00 mm | 45.00 mm | 93.00 mm | 12.00 mm | 12.00 mm | Po povpraševanju | |
| 3522 16.000 | 58.00 mm | 48.00 mm | 108.00 mm | 16.00 mm | 16.00 mm | Po povpraševanju |