← Katalóg
Umiestnením kurzora myši na obrázok ho priblížite
6164
Ratio end mill RF 100 Sharp short shank
Ratio end mill RF 100 Sharp short shank. Designation: Ratio end mill RF 100 Sharp short shank, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844973084, Indicator new/addition: New, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38, Back rake angle: 11, Length picto milling: long+, Number of cutting edges range (from/to): 4, Feed direction: with drilling
Technické parametre
- EAN
- 4049844973084
- Type
- N
- Surface
- AlCrN
- Designation
- Ratio end mill RF 100 Sharp short shank
- Helix angle
- 38
- Diameter range
- 1.000 mm – 3.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- long+
- Indicator new/addition
- New
- Number of cutting edges range (from/to)
- 4
Rozmery a objednávacie kódy
| Objednávací kód | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Dostupnosť | Vyžiadať cenu |
|---|---|---|---|---|---|---|---|
| 6164 2.000 | 7.40 mm | 25.80 mm | 43.00 mm | 6.00 mm | 2.00 mm | Na vyžiadanie | |
| 6164 2.500 | 9.25 mm | 24.90 mm | 43.00 mm | 6.00 mm | 2.50 mm | Na vyžiadanie | |
| 6164 1.000 | 3.80 mm | 22.30 mm | 33.00 mm | 4.00 mm | 1.00 mm | Na vyžiadanie | |
| 6164 3.000 | 12.10 mm | 21.10 mm | 43.00 mm | 6.00 mm | 3.00 mm | Na vyžiadanie | |
| 6164 1.500 | 5.70 mm | 21.40 mm | 33.00 mm | 4.00 mm | 1.50 mm | Na vyžiadanie |