Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093779807, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling

Spécifications techniques

EAN: 4031093779807
Type: N
Designation: Ball nose slot drill (2-fluted)
Helix angle: 30
Diameter range: 0.500 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Dimensions et références de commande

Code commande	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilité
5585 3.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Sur demande
5585 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Sur demande
5585 0.500	1.70 mm	28.00 mm	38.00 mm	3.00 mm	0.50 mm	Sur demande
5585 1.000	3.25 mm	28.00 mm	38.00 mm	3.00 mm	1.00 mm	Sur demande
5585 1.500	5.50 mm	28.00 mm	38.00 mm	3.00 mm	1.50 mm	Sur demande
5585 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Sur demande
5585 5.000	15.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Sur demande
5585 12.000	35.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Sur demande
5585 2.000	8.50 mm	36.00 mm	57.00 mm	6.00 mm	2.00 mm	Sur demande
5585 10.000	29.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Sur demande
5585 4.000	12.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Sur demande
5585 6.000	17.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Sur demande