← Kataloogga
Dul keen sawirka si aad u weyneyso
6118
End mill (single-fluted)
End mill (single-fluted). Designation: End mill (single-fluted), Diameter range: 4.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844743274, Cutting material: HSCO, Surface: bright, Helix angle: 30, Back rake angle: 20, Number of cutting edges range (from/to): 1, Corner design: Schneidecke 90°, Feed direction: with drilling
Faahfaahinta farsamada
- EAN
- 4049844743274
- Surface
- bright
- Designation
- End mill (single-fluted)
- Helix angle
- 30
- Corner design
- Schneidecke 90°
- Diameter range
- 4.000 mm – 8.000 mm
- Feed direction
- with drilling
- Back rake angle
- 20
- Cutting material
- HSCO
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Number of cutting edges range (from/to)
- 1
Cabbirrada iyo koodhadhka dalbashada
| Koodhka dalbashada | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Helitaanka | Codso qiimaha |
|---|---|---|---|---|---|---|---|
| 6118 8.000 | 43.50 mm | 30.00 mm | 100.00 mm | 8.00 mm | 8.00 mm | Marka la codsado | |
| 6118 5.000 | 24.00 mm | 36.00 mm | 80.00 mm | 8.00 mm | 5.00 mm | Marka la codsado | |
| 6118 4.000 | 24.00 mm | 35.00 mm | 80.00 mm | 8.00 mm | 4.00 mm | Marka la codsado | |
| 6118 6.000 | 26.00 mm | 45.00 mm | 90.00 mm | 8.00 mm | 6.00 mm | Marka la codsado |