← Catalogus
Beweeg over de afbeelding om in te zoomen
6951
Circular milling cutter full radius
Circular milling cutter full radius. Designation: Circular milling cutter full radius, Diameter range: 3.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"partial"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4049844771055, Indicator new/addition: New, Cutting material: Solid carbide, Surface: AlCrN, Helix angle: 7, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 3-4, Type of machine interface: HA, Feed direction: lateral
Technische specificaties
- EAN
- 4049844771055
- Surface
- AlCrN
- Designation
- Circular milling cutter full radius
- Helix angle
- 7
- Diameter range
- 3.800 mm – 11.800 mm
- Feed direction
- lateral
- Back rake angle
- 10
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"partial"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Indicator new/addition
- New
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 3-4
Afmetingen en bestelcodes
| Bestelcode | Shank length | Total length | Shank diameter | Nominal diameter | Flute length | Beschikbaarheid | Prijs aanvragen |
|---|---|---|---|---|---|---|---|
| 6951 9.805 | 40.00 mm | 66.00 mm | 10.00 mm | 9.80 mm | — | Op aanvraag | |
| 6951 3.801 | 36.00 mm | 54.00 mm | 6.00 mm | 3.80 mm | 1.95 mm | Op aanvraag | |
| 6951 9.804 | 40.00 mm | 66.00 mm | 10.00 mm | 9.80 mm | — | Op aanvraag | |
| 6951 7.803 | 36.00 mm | 58.00 mm | 8.00 mm | 7.80 mm | — | Op aanvraag | |
| 6951 5.802 | 36.00 mm | 54.00 mm | 6.00 mm | 5.80 mm | — | Op aanvraag | |
| 6951 7.802 | 36.00 mm | 58.00 mm | 8.00 mm | 7.80 mm | 3.56 mm | Op aanvraag | |
| 6951 9.803 | 40.00 mm | 66.00 mm | 10.00 mm | 9.80 mm | 4.43 mm | Op aanvraag | |
| 6951 5.801 | 36.00 mm | 54.00 mm | 6.00 mm | 5.80 mm | — | Op aanvraag | |
| 6951 9.801 | 40.00 mm | 66.00 mm | 10.00 mm | 9.80 mm | 4.33 mm | Op aanvraag | |
| 6951 11.802 | 45.00 mm | 83.00 mm | 12.00 mm | 11.80 mm | 5.33 mm | Op aanvraag | |
| 6951 11.801 | 45.00 mm | 83.00 mm | 12.00 mm | 11.80 mm | 5.23 mm | Op aanvraag | |
| 6951 9.802 | 40.00 mm | 66.00 mm | 10.00 mm | 9.80 mm | 4.34 mm | Op aanvraag | |
| 6951 7.801 | 36.00 mm | 58.00 mm | 8.00 mm | 7.80 mm | 3.57 mm | Op aanvraag |