← Catalogus
Beweeg over de afbeelding om in te zoomen
3189
Hard roughing end mill GS 100 H (fine teeth)
Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093665612, Cutting material: Solid carbide, Type: H, Helix angle: 20, Back rake angle: 3, Length picto milling: long, Number of cutting edges range (from/to): 4
Technische specificaties
- EAN
- 4031093665612
- Type
- H
- Designation
- Hard roughing end mill GS 100 H (fine teeth)
- Helix angle
- 20
- Diameter range
- 6.350 mm – 19.050 mm
- Back rake angle
- 3
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Number of cutting edges range (from/to)
- 4
Afmetingen en bestelcodes
| Bestelcode | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Beschikbaarheid | Prijs aanvragen |
|---|---|---|---|---|---|---|---|
| 3189 15.870 | 40.00 mm | 48.90 mm | 88.90 mm | 15.88 mm | 15.88 mm | Op aanvraag | |
| 3189 6.350 | 23.50 mm | 40.00 mm | 63.50 mm | 6.35 mm | 6.35 mm | Op aanvraag | |
| 3189 7.940 | 23.50 mm | 40.00 mm | 63.50 mm | 7.94 mm | 7.94 mm | Op aanvraag | |
| 3189 12.700 | 33.50 mm | 42.70 mm | 76.20 mm | 12.70 mm | 12.70 mm | Op aanvraag | |
| 3189 9.520 | 28.00 mm | 35.50 mm | 63.50 mm | 9.53 mm | 9.53 mm | Op aanvraag | |
| 3189 19.050 | 51.50 mm | 50.10 mm | 101.60 mm | 19.05 mm | 19.05 mm | Op aanvraag |