← Catalogus
Beweeg over de afbeelding om in te zoomen
546
NC spotting drill 142°
NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":"partial"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"partial"}], EAN: 4031093784856, Cutting material: Solid carbide, Surface: bright, Type: N, Standard: Company std., Point angle: 142, Tolerance class nominal diameter: h6, Cutting direction: Right-hand, Type of machine interface: HB
Technische specificaties
- EAN
- 4031093784856
- Type
- N
- Surface
- bright
- Standard
- Company std.
- Designation
- NC spotting drill 142°
- Point angle
- 142
- Diameter range
- 4.000 mm – 20.000 mm
- Cutting material
- Solid carbide
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":"partial"},{"attr":"N","val":"full"},{"attr":"S","val":"partial"},{"attr":"H","val":"partial"}]
- Type of machine interface
- HB
- Tolerance class nominal diameter
- h6
Afmetingen en bestelcodes
| Bestelcode | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Beschikbaarheid | Prijs aanvragen |
|---|---|---|---|---|---|---|---|
| 546 8.000 | 21.00 mm | 36.00 mm | 79.00 mm | 8.00 mm | 8.00 mm | Op aanvraag | |
| 546 6.000 | 16.00 mm | 36.00 mm | 66.00 mm | 6.00 mm | 6.00 mm | Op aanvraag | |
| 546 16.000 | 37.50 mm | 48.00 mm | 115.00 mm | 16.00 mm | 16.00 mm | Op aanvraag | |
| 546 10.000 | 25.00 mm | 40.00 mm | 89.00 mm | 10.00 mm | 10.00 mm | Op aanvraag | |
| 546 20.000 | 45.00 mm | 50.00 mm | 131.00 mm | 20.00 mm | 20.00 mm | Op aanvraag | |
| 546 12.000 | 30.00 mm | 45.00 mm | 102.00 mm | 12.00 mm | 12.00 mm | Op aanvraag | |
| 546 5.000 | 14.00 mm | 48.00 mm | 62.00 mm | 5.00 mm | 5.00 mm | Op aanvraag | |
| 546 4.000 | 12.00 mm | 43.00 mm | 55.00 mm | 4.00 mm | 4.00 mm | Op aanvraag |