← Catalogus
Beweeg over de afbeelding om in te zoomen
19966
Roughing end mill with fine teeth
Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"full"}], EAN: 4049844199101, Cutting material: Solid carbide, Type: H, Helix angle: 20, Length picto milling: long, Number of cutting edges range (from/to): 3-5, Type of machine interface: HA
Technische specificaties
- EAN
- 4049844199101
- Type
- H
- Designation
- Roughing end mill with fine teeth
- Helix angle
- 20
- Diameter range
- 5.000 mm – 25.000 mm
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 3-5
Afmetingen en bestelcodes
| Bestelcode | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Beschikbaarheid | Prijs aanvragen |
|---|---|---|---|---|---|---|---|
| 19966 10.000 | 30.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Op aanvraag | |
| 19966 12.000 | 36.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Op aanvraag | |
| 19966 8.000 | 25.50 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Op aanvraag | |
| 19966 16.000 | 44.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Op aanvraag | |
| 19966 6.000 | 22.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Op aanvraag | |
| 19966 20.000 | 52.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Op aanvraag | |
| 19966 5.000 | 21.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 5.00 mm | Op aanvraag | |
| 19966 25.000 | 63.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | Op aanvraag |