← Catalogus
Beweeg over de afbeelding om in te zoomen
727
Shell reamer
Shell reamer. Designation: Shell reamer, Diameter range: 25.000 mm – 75.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4031093237093, Cutting material: Carbide-tipped, Surface: bright, Standard: DIN 8054, Tolerance class hole: H7, Number of cutting edges range (from/to): 6-12, Back rake angle: 5, Hole type: Blind hole, Cutting direction: Right-hand
Technische specificaties
- EAN
- 4031093237093
- Surface
- bright
- Standard
- DIN 8054
- Hole type
- Blind hole
- Designation
- Shell reamer
- Diameter range
- 25.000 mm – 75.000 mm
- Back rake angle
- 5
- Cutting material
- Carbide-tipped
- Cutting direction
- Right-hand
- Internal diameter
- 27.00 mm
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
- Tolerance class hole
- H7
- Number of cutting edges range (from/to)
- 6-12
Afmetingen en bestelcodes
| Bestelcode | Flute length | Total length | Nominal diameter | Beschikbaarheid | Prijs aanvragen |
|---|---|---|---|---|---|
| 727 72.000 | 61.00 mm | 71.00 mm | 72.00 mm | Op aanvraag | |
| 727 68.000 | 62.00 mm | 71.00 mm | 68.00 mm | Op aanvraag | |
| 727 35.000 | 40.00 mm | 45.00 mm | 35.00 mm | Op aanvraag | |
| 727 44.000 | 43.00 mm | 50.00 mm | 44.00 mm | Op aanvraag | |
| 727 36.000 | 44.00 mm | 50.00 mm | 36.00 mm | Op aanvraag | |
| 727 60.000 | 55.00 mm | 63.00 mm | 60.00 mm | Op aanvraag | |
| 727 55.000 | 55.00 mm | 63.00 mm | 55.00 mm | Op aanvraag | |
| 727 40.000 | 44.00 mm | 50.00 mm | 40.00 mm | Op aanvraag | |
| 727 42.000 | 44.00 mm | 50.00 mm | 42.00 mm | Op aanvraag | |
| 727 45.000 | 43.00 mm | 50.00 mm | 45.00 mm | Op aanvraag | |
| 727 38.000 | 44.00 mm | 50.00 mm | 38.00 mm | Op aanvraag | |
| 727 70.000 | 62.00 mm | 71.00 mm | 70.00 mm | Op aanvraag | |
| 727 58.000 | 55.00 mm | 63.00 mm | 58.00 mm | Op aanvraag | |
| 727 50.000 | 49.00 mm | 56.00 mm | 50.00 mm | Op aanvraag | |
| 727 30.000 | 40.00 mm | 45.00 mm | 30.00 mm | Op aanvraag | |
| 727 37.000 | 44.00 mm | 50.00 mm | 37.00 mm | Op aanvraag | |
| 727 48.000 | 49.00 mm | 56.00 mm | 48.00 mm | Op aanvraag | |
| 727 75.000 | 61.00 mm | 71.00 mm | 75.00 mm | Op aanvraag | |
| 727 25.000 | 40.00 mm | 45.00 mm | 25.00 mm | Op aanvraag |