← แคตตาล็อก
วางเมาส์เหนือรูปภาพเพื่อซูม
3167
End mill with corner radius (4-fluted)
End mill with corner radius (4-fluted). Designation: End mill with corner radius (4-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093664639, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: medium, Number of cutting edges range (from/to): 4, Feed direction: with drilling
ข้อมูลจำเพาะทางเทคนิค
- EAN
- 4031093664639
- Type
- N
- Designation
- End mill with corner radius (4-fluted)
- Helix angle
- 30
- Diameter range
- 3.175 mm – 19.050 mm
- Feed direction
- with drilling
- Back rake angle
- 9
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- medium
- Number of cutting edges range (from/to)
- 4
ขนาดและรหัสสั่งซื้อ
| รหัสสั่งซื้อ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | สถานะสต็อก | ขอราคา |
|---|---|---|---|---|---|---|---|
| 3167 9.520 | 38.02 mm | 38.17 mm | 76.20 mm | 9.53 mm | 9.53 mm | ตามคำขอ | |
| 3167 4.760 | 23.76 mm | 39.74 mm | 63.50 mm | 4.76 mm | 4.76 mm | ตามคำขอ | |
| 3167 19.050 | 74.53 mm | 52.47 mm | 127.00 mm | 19.05 mm | 19.05 mm | ตามคำขอ | |
| 3167 15.870 | 71.61 mm | 55.40 mm | 127.00 mm | 15.88 mm | 15.88 mm | ตามคำขอ | |
| 3167 3.170 | 15.68 mm | 35.13 mm | 50.80 mm | 3.17 mm | 3.17 mm | ตามคำขอ | |
| 3167 12.700 | 62.68 mm | 51.62 mm | 114.30 mm | 12.70 mm | 12.70 mm | ตามคำขอ | |
| 3167 6.350 | 34.85 mm | 41.35 mm | 76.20 mm | 6.35 mm | 6.35 mm | ตามคำขอ | |
| 3167 7.940 | 36.44 mm | 39.76 mm | 76.20 mm | 7.94 mm | 7.94 mm | ตามคำขอ | |
| 3167 11.110 | 61.22 mm | 53.08 mm | 114.30 mm | 11.11 mm | 11.11 mm | ตามคำขอ |