← แคตตาล็อก
วางเมาส์เหนือรูปภาพเพื่อซูม
5545
Multi-tooth end mill GH 100 U
Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093641296, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Type of machine interface: HB, Corner design: Schneidecke 90°
ข้อมูลจำเพาะทางเทคนิค
- EAN
- 4031093641296
- Type
- N
- Designation
- Multi-tooth end mill GH 100 U
- Helix angle
- 45
- Corner design
- Schneidecke 90°
- Diameter range
- 6.000 mm – 20.000 mm
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 6-8
ขนาดและรหัสสั่งซื้อ
| รหัสสั่งซื้อ | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | สถานะสต็อก | ขอราคา |
|---|---|---|---|---|---|---|---|
| 5545 6.000 | 15.40 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | ตามคำขอ | |
| 5545 16.000 | 38.40 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | ตามคำขอ | |
| 5545 12.000 | 30.80 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | ตามคำขอ | |
| 5545 20.000 | 44.60 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | ตามคำขอ | |
| 5545 8.000 | 22.20 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | ตามคำขอ | |
| 5545 10.000 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | ตามคำขอ | |
| 5545 14.000 | 31.60 mm | 45.00 mm | 83.00 mm | 14.00 mm | 14.00 mm | ตามคำขอ | |
| 5545 18.000 | 37.94 mm | 48.00 mm | 92.00 mm | 18.00 mm | 18.00 mm | ตามคำขอ |