Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093663267, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 45, Back rake angle: 25, Length picto milling: long, Number of cutting edges range (from/to): 2, Feed direction: with drilling

Мушаххасоти техникӣ

EAN: 4031093663267
Type: W
Surface: bright
Designation: Al slot drill (2-fluted)
Helix angle: 45
Diameter range: 3.175 mm – 25.400 mm
Feed direction: with drilling
Back rake angle: 25
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Number of cutting edges range (from/to): 2

Андозаҳо ва рамзҳои фармоиш

Рамзи фармоиш	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Мавҷудият
3174 3.170	17.00 mm	21.10 mm	38.10 mm	3.17 mm	3.17 mm	Тибқи дархост
3174 6.350	26.00 mm	37.50 mm	63.50 mm	6.35 mm	6.35 mm	Тибқи дархост
3174 19.050	52.00 mm	49.60 mm	101.60 mm	19.05 mm	19.05 mm	Тибқи дархост
3174 25.400	60.50 mm	41.10 mm	101.60 mm	25.40 mm	25.40 mm	Тибқи дархост
3174 14.290	39.50 mm	49.40 mm	88.90 mm	14.29 mm	14.29 mm	Тибқи дархост
3174 15.870	43.00 mm	45.90 mm	88.90 mm	15.88 mm	15.88 mm	Тибқи дархост
3174 7.940	27.50 mm	36.00 mm	63.50 mm	7.94 mm	7.94 mm	Тибқи дархост
3174 9.520	30.50 mm	33.00 mm	63.50 mm	9.53 mm	9.53 mm	Тибқи дархост
3174 11.110	34.50 mm	35.35 mm	69.85 mm	11.11 mm	11.11 mm	Тибқи дархост
3174 4.760	23.00 mm	27.80 mm	50.80 mm	4.76 mm	4.76 mm	Тибқи дархост
3174 12.700	35.50 mm	40.70 mm	76.20 mm	12.70 mm	12.70 mm	Тибқи дархост