← Каталог
Барои калон кардан курсорро ба болои тасвир баред
6167
Ball nose end mill G-Mold 55 B short shank
Ball nose end mill G-Mold 55 B short shank. Designation: Ball nose end mill G-Mold 55 B short shank, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}], EAN: 4049844980433, Indicator new/addition: New, Cutting material: Solid carbide, Surface: Perrox, Type: N, Helix angle: 30, Back rake angle: 8, Length picto milling: medium, Number of cutting edges range (from/to): 2, Feed direction: with drilling
Мушаххасоти техникӣ
- EAN
- 4049844980433
- Type
- N
- Surface
- Perrox
- Designation
- Ball nose end mill G-Mold 55 B short shank
- Helix angle
- 30
- Diameter range
- 0.500 mm – 3.000 mm
- Feed direction
- with drilling
- Back rake angle
- 8
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"full"}]
- Length picto milling
- medium
- Indicator new/addition
- New
- Number of cutting edges range (from/to)
- 2
Андозаҳо ва рамзҳои фармоиш
| Рамзи фармоиш | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Мавҷудият | Дархости нарх |
|---|---|---|---|---|---|---|---|
| 6167 3.000 | 7.50 mm | 23.70 mm | 48.00 mm | 6.00 mm | 3.00 mm | Тибқи дархост | |
| 6167 2.000 | 5.00 mm | 24.30 mm | 43.00 mm | 6.00 mm | 2.00 mm | Тибқи дархост | |
| 6167 0.800 | 2.00 mm | 21.90 mm | 33.00 mm | 4.00 mm | 0.80 mm | Тибқи дархост | |
| 6167 1.500 | 3.75 mm | 23.10 mm | 38.00 mm | 4.00 mm | 1.50 mm | Тибқи дархост | |
| 6167 0.500 | 1.25 mm | 22.80 mm | 33.00 mm | 4.00 mm | 0.50 mm | Тибқи дархост | |
| 6167 1.000 | 2.50 mm | 23.80 mm | 36.00 mm | 4.00 mm | 1.00 mm | Тибқи дархост |