← Каталог
Барои калон кардан курсорро ба болои тасвир баред
4139
Drill thread milling cutter for UNC-threads
Drill thread milling cutter for UNC-threads. Designation: Drill thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844070035, Cutting material: Solid carbide, Surface: Sirius, Product family: DTMC-SP, Cutting direction: Right-hand, Type of machine interface: HA, Drilling depth: 2xD, Hole type: Through-hole, blind hole drilling
Мушаххасоти техникӣ
- EAN
- 4049844070035
- Surface
- Sirius
- Hole type
- Through-hole, blind hole drilling
- Designation
- Drill thread milling cutter for UNC-threads
- Drilling depth
- 2xD
- Product family
- DTMC-SP
- Cutting material
- Solid carbide
- Cutting direction
- Right-hand
- TABLE_INFO_PASSON
- [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Type of machine interface
- HA
Андозаҳо ва рамзҳои фармоиш
| Рамзи фармоиш | Flute length | Shank length | Total length | Shank diameter | Мавҷудият | Дархости нарх |
|---|---|---|---|---|---|---|
| 4139 9.525 | 30.00 mm | 45.00 mm | 80.00 mm | 12.00 mm | Тибқи дархост | |
| 4139 7.938 | 24.00 mm | 40.00 mm | 74.00 mm | 10.00 mm | Тибқи дархост | |
| 4139 6.350 | 20.00 mm | 36.00 mm | 62.00 mm | 8.00 mm | Тибқи дархост | |
| 4139 14.288 | 43.00 mm | 48.00 mm | 102.00 mm | 16.00 mm | Тибқи дархост | |
| 4139 15.875 | 49.00 mm | 48.00 mm | 102.00 mm | 18.00 mm | Тибқи дархост | |
| 4139 12.700 | 37.00 mm | 45.00 mm | 90.00 mm | 14.00 mm | Тибқи дархост | |
| 4139 11.113 | 34.00 mm | 45.00 mm | 80.00 mm | 12.00 mm | Тибқи дархост |