Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4031093674614, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 55, Length picto milling: long, Number of cutting edges range (from/to): 6-8, Type of machine interface: HA

Мушаххасоти техникӣ

EAN: 4031093674614
Type: H
Surface: Signum
Designation: Hard multi-tooth end mill GH 100 H
Helix angle: 55
Diameter range: 3.000 mm – 20.000 mm
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 6-8

Андозаҳо ва рамзҳои фармоиш

Рамзи фармоиш	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Мавҷудият
3715 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Тибқи дархост
3715 18.001	46.00 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	Тибқи дархост
3715 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Тибқи дархост
3715 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Тибқи дархост
3715 18.000	40.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Тибқи дархост
3715 4.000	14.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Тибқи дархост
3715 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Тибқи дархост
3715 14.001	38.00 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	Тибқи дархост
3715 20.000	46.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Тибқи дархост
3715 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Тибқи дархост
3715 12.000	32.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Тибқи дархост
3715 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Тибқи дархост
3715 16.000	39.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Тибқи дархост