HSC ball nose hard profile cutter GA 200 A

HSC ball nose hard profile cutter GA 200 A. Designation: HSC ball nose hard profile cutter GA 200 A, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844811270, Cutting material: Solid carbide, Surface: Carbo+, Type: W, Helix angle: 35, Back rake angle: 15, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling

Мушаххасоти техникӣ

EAN: 4049844811270
Type: W
Surface: Carbo+
Designation: HSC ball nose hard profile cutter GA 200 A
Helix angle: 35
Diameter range: 3.000 mm – 16.000 mm
Feed direction: with drilling
Back rake angle: 15
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Андозаҳо ва рамзҳои фармоиш

Рамзи фармоиш	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Мавҷудият
6917 16.000	32.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Тибқи дархост
6917 4.000	9.50 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Тибқи дархост
6917 8.000	17.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Тибқи дархост
6917 6.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Тибқи дархост
6917 10.000	21.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Тибқи дархост
6917 5.000	11.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Тибқи дархост
6917 12.000	25.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Тибқи дархост
6917 3.000	8.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Тибқи дархост