Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.570 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"partial"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093243421, Cutting material: Solid carbide, Surface: bright, Product family: GS 200 G, Drilling depth: 5xD, Standard: DIN 6539, Point angle: 150, Tolerance class nominal diameter: h7, Cutting direction: Right-hand

Мушаххасоти техникӣ

EAN: 4031093243421
Surface: bright
Standard: DIN 6539
Designation: Ratio drill without coolant ducts, 3-fluted
Point angle: 150
Diameter range: 3.570 mm – 19.050 mm
Drilling depth: 5xD
Product family: GS 200 G
Cutting material: Solid carbide
Cutting direction: Right-hand
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"partial"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Tolerance class nominal diameter: h7

Андозаҳо ва рамзҳои фармоиш

Рамзи фармоиш	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Мавҷудият
745 13.400	66.00 mm	41.00 mm	107.00 mm	13.40 mm	13.40 mm	Тибқи дархост
745 6.900	45.00 mm	29.00 mm	74.00 mm	6.90 mm	6.90 mm	Тибқи дархост
745 7.600	48.00 mm	31.00 mm	79.00 mm	7.60 mm	7.60 mm	Тибқи дархост
745 8.800	52.00 mm	32.00 mm	84.00 mm	8.80 mm	8.80 mm	Тибқи дархост
745 12.500	65.00 mm	37.00 mm	102.00 mm	12.50 mm	12.50 mm	Тибқи дархост
745 8.330	48.00 mm	31.00 mm	79.00 mm	8.33 mm	8.33 mm	Тибқи дархост
745 7.940	48.00 mm	31.00 mm	79.00 mm	7.94 mm	7.94 mm	Тибқи дархост
745 4.370	32.00 mm	26.00 mm	58.00 mm	4.37 mm	4.37 mm	Тибқи дархост
745 3.570	27.00 mm	25.00 mm	52.00 mm	3.57 mm	3.57 mm	Тибқи дархост
745 10.720	60.00 mm	35.00 mm	95.00 mm	10.72 mm	10.72 mm	Тибқи дархост