Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844202368, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Type: W, Helix angle: 39/40/41, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: ~HA/~HB, Corner design: Schneidecke 90°, Feed direction: with drilling

Мушаххасоти техникӣ

EAN: 4049844202368
Type: W
Surface: bright
Designation: Ratio end mill RF 100 AL
Helix angle: 39/40/41
Corner design: Schneidecke 90°
Diameter range: 3.175 mm – 19.050 mm
Feed direction: with drilling
Product family: RF 100 A
Back rake angle: 10
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: ~HA/~HB
Number of cutting edges range (from/to): 3

Андозаҳо ва рамзҳои фармоиш

Рамзи фармоиш	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Мавҷудият
6775 12.700	41.75 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	Тибқи дархост
6775 6.350	26.05 mm	37.45 mm	63.50 mm	6.35 mm	6.35 mm	Тибқи дархост
6775 9.520	33.40 mm	30.10 mm	63.50 mm	9.53 mm	9.53 mm	Тибқи дархост
6775 3.170	15.70 mm	35.10 mm	50.80 mm	3.17 mm	3.17 mm	Тибқи дархост
6775 15.870	42.75 mm	48.40 mm	88.90 mm	15.88 mm	15.88 mm	Тибқи дархост
6775 19.050	52.10 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	Тибқи дархост
6775 7.940	27.64 mm	35.86 mm	63.50 mm	7.94 mm	7.94 mm	Тибқи дархост
6775 4.760	19.87 mm	30.93 mm	50.80 mm	4.76 mm	4.76 mm	Тибқи дархост