← Каталог
Барои калон кардан курсорро ба болои тасвир баред
6480
Ratio end mill RF 100 Sharp
Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844492165, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38, Back rake angle: 11, Length picto milling: medium, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling
Мушаххасоти техникӣ
- EAN
- 4049844492165
- Type
- N
- Surface
- AlCrN
- Designation
- Ratio end mill RF 100 Sharp
- Helix angle
- 38
- Diameter range
- 1.000 mm – 20.000 mm
- Feed direction
- with drilling
- Back rake angle
- 11
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
- Length picto milling
- medium
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
Андозаҳо ва рамзҳои фармоиш
| Рамзи фармоиш | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Мавҷудият | Дархости нарх |
|---|---|---|---|---|---|---|---|
| 6480 1.000 | 3.80 mm | 28.00 mm | 50.00 mm | 4.00 mm | 1.00 mm | Тибқи дархост | |
| 6480 2.000 | 7.40 mm | 36.00 mm | 57.00 mm | 6.00 mm | 2.00 mm | Тибқи дархост | |
| 6480 10.000 | 32.40 mm | 40.00 mm | 93.00 mm | 10.00 mm | 10.00 mm | Тибқи дархост | |
| 6480 3.000 | 12.10 mm | 36.00 mm | 65.00 mm | 6.00 mm | 3.00 mm | Тибқи дархост | |
| 6480 5.000 | 18.25 mm | 36.00 mm | 65.00 mm | 6.00 mm | 5.00 mm | Тибқи дархост | |
| 6480 1.500 | 5.70 mm | 28.00 mm | 50.00 mm | 4.00 mm | 1.50 mm | Тибқи дархост | |
| 6480 14.000 | 36.96 mm | 45.00 mm | 100.00 mm | 14.00 mm | 14.00 mm | Тибқи дархост | |
| 6480 20.000 | 53.00 mm | 50.00 mm | 126.00 mm | 20.00 mm | 20.00 mm | Тибқи дархост | |
| 6480 2.500 | 9.25 mm | 36.00 mm | 57.00 mm | 6.00 mm | 2.50 mm | Тибқи дархост | |
| 6480 6.000 | 22.90 mm | 36.00 mm | 75.00 mm | 6.00 mm | 6.00 mm | Тибқи дархост | |
| 6480 12.000 | 35.68 mm | 45.00 mm | 100.00 mm | 12.00 mm | 12.00 mm | Тибқи дархост | |
| 6480 4.000 | 16.60 mm | 36.00 mm | 65.00 mm | 6.00 mm | 4.00 mm | Тибқи дархост | |
| 6480 16.000 | 48.24 mm | 48.00 mm | 123.00 mm | 16.00 mm | 16.00 mm | Тибқи дархост | |
| 6480 8.000 | 26.20 mm | 36.00 mm | 80.00 mm | 8.00 mm | 8.00 mm | Тибқи дархост |