Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844492738, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38, Back rake angle: 12, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB, Feed direction: with drilling

Мушаххасоти техникӣ

EAN: 4049844492738
Type: N
Surface: AlCrN
Designation: Ratio end mill RF 100 Sharp
Helix angle: 38
Diameter range: 1.590 mm – 25.400 mm
Feed direction: with drilling
Back rake angle: 12
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: ~HB
Number of cutting edges range (from/to): 4

Андозаҳо ва рамзҳои фармоиш

Рамзи фармоиш	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Мавҷудият
6484 25.400	54.61 mm	58.00 mm	114.30 mm	25.40 mm	25.40 mm	Тибқи дархост
6484 6.350	21.91 mm	35.00 mm	63.50 mm	6.35 mm	6.35 mm	Тибқи дархост
6484 3.170	11.75 mm	34.50 mm	50.80 mm	4.76 mm	3.17 mm	Тибқи дархост
6484 4.760	18.02 mm	35.00 mm	63.50 mm	6.35 mm	4.76 mm	Тибқи дархост
6484 12.700	36.83 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	Тибқи дархост
6484 7.940	24.21 mm	36.00 mm	63.50 mm	7.94 mm	7.94 mm	Тибқи дархост
6484 11.110	29.84 mm	37.20 mm	69.85 mm	11.11 mm	11.11 mm	Тибқи дархост
6484 15.870	44.45 mm	48.40 mm	95.25 mm	15.88 mm	15.88 mm	Тибқи дархост
6484 9.520	29.21 mm	36.00 mm	69.85 mm	9.53 mm	9.53 mm	Тибқи дархост
6484 19.050	48.90 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	Тибқи дархост