← Каталог
Барои калон кардан курсорро ба болои тасвир баред
3898
Ratio end mill Superfinish RF 100 SF
Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844020085, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: 3xD, Number of cutting edges range (from/to): 5, Type of machine interface: HB
Мушаххасоти техникӣ
- EAN
- 4049844020085
- Type
- N
- Designation
- Ratio end mill Superfinish RF 100 SF
- Helix angle
- 45
- Diameter range
- 4.000 mm – 20.000 mm
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- 3xD
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 5
Андозаҳо ва рамзҳои фармоиш
| Рамзи фармоиш | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Мавҷудият | Дархости нарх |
|---|---|---|---|---|---|---|---|
| 3898 8.000 | 30.00 mm | 36.00 mm | 75.00 mm | 8.00 mm | 8.00 mm | Тибқи дархост | |
| 3898 4.000 | 16.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 4.00 mm | Тибқи дархост | |
| 3898 12.000 | 43.00 mm | 45.00 mm | 93.00 mm | 12.00 mm | 12.00 mm | Тибқи дархост | |
| 3898 20.000 | 71.00 mm | 50.00 mm | 126.00 mm | 20.00 mm | 20.00 mm | Тибқи дархост | |
| 3898 6.000 | 23.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 6.00 mm | Тибқи дархост | |
| 3898 5.000 | 19.00 mm | 36.00 mm | 65.00 mm | 6.00 mm | 5.00 mm | Тибқи дархост | |
| 3898 10.000 | 36.00 mm | 40.00 mm | 80.00 mm | 10.00 mm | 10.00 mm | Тибқи дархост | |
| 3898 16.000 | 57.00 mm | 48.00 mm | 108.00 mm | 16.00 mm | 16.00 mm | Тибқи дархост |