Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.175 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093732420, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Feed direction: with drilling

Мушаххасоти техникӣ

EAN: 4031093732420
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 3.175 mm – 31.750 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: long
Number of cutting edges range (from/to): 4

Андозаҳо ва рамзҳои фармоиш

Рамзи фармоиш	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Мавҷудият
3114 19.050	50.38 mm	51.22 mm	101.60 mm	19.05 mm	19.05 mm	Тибқи дархост
3114 4.760	19.33 mm	31.47 mm	50.80 mm	4.76 mm	4.76 mm	Тибқи дархост
3114 6.350	23.45 mm	40.05 mm	63.50 mm	6.35 mm	6.35 mm	Тибқи дархост
3114 25.400	54.51 mm	47.09 mm	101.60 mm	25.40 mm	25.40 mm	Тибқи дархост
3114 7.940	25.82 mm	37.68 mm	63.50 mm	7.94 mm	7.94 mm	Тибқи дархост
3114 9.520	31.88 mm	31.62 mm	63.50 mm	9.53 mm	9.53 mm	Тибқи дархост
3114 11.110	32.95 mm	36.90 mm	69.85 mm	11.11 mm	11.11 mm	Тибқи дархост
3114 3.170	11.72 mm	39.08 mm	50.80 mm	3.17 mm	3.17 mm	Тибқи дархост
3114 31.750	84.14 mm	68.26 mm	152.40 mm	31.75 mm	31.75 mm	Тибқи дархост
3114 12.700	34.01 mm	42.19 mm	76.20 mm	12.70 mm	12.70 mm	Тибқи дархост
3114 15.870	42.32 mm	46.58 mm	88.90 mm	15.88 mm	15.88 mm	Тибқи дархост