Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093636063, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling

Мушаххасоти техникӣ

EAN: 4031093636063
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 4.000 mm – 25.000 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Андозаҳо ва рамзҳои фармоиш

Рамзи фармоиш	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Мавҷудият
5535 6.000	17.20 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Тибқи дархост
5535 14.000	35.38 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Тибқи дархост
5535 20.000	51.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Тибқи дархост
5535 8.000	24.36 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Тибқи дархост
5535 12.000	34.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Тибқи дархост
5535 16.000	42.40 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Тибқи дархост
5535 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Тибқи дархост
5535 18.000	43.70 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Тибқи дархост
5535 10.000	28.70 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Тибқи дархост
5535 25.000	61.25 mm	56.00 mm	121.00 mm	25.00 mm	25.00 mm	Тибқи дархост
5535 4.000	13.80 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Тибқи дархост