End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093641647, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: extra long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°

Vipimo vya kiufundi

EAN: 4031093641647
Type: N
Designation: End mill XL (4-fluted)
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: extra long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Vipimo na misimbo ya kuagizia

Msimbo wa agizo	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Upatikanaji
5556 6.000	36.00 mm	36.00 mm	75.00 mm	6.00 mm	6.00 mm	Kulingana na ombi
5556 4.000	29.00 mm	28.00 mm	75.00 mm	4.00 mm	4.00 mm	Kulingana na ombi
5556 3.000	23.00 mm	28.00 mm	75.00 mm	3.00 mm	3.00 mm	Kulingana na ombi
5556 10.000	50.00 mm	40.00 mm	100.00 mm	10.00 mm	10.00 mm	Kulingana na ombi
5556 5.000	35.00 mm	28.00 mm	75.00 mm	5.00 mm	5.00 mm	Kulingana na ombi
5556 20.000	83.40 mm	50.00 mm	150.00 mm	20.00 mm	20.00 mm	Kulingana na ombi
5556 8.000	48.00 mm	36.00 mm	100.00 mm	8.00 mm	8.00 mm	Kulingana na ombi
5556 12.000	56.04 mm	45.00 mm	150.00 mm	12.00 mm	12.00 mm	Kulingana na ombi
5556 16.000	79.72 mm	48.00 mm	150.00 mm	16.00 mm	16.00 mm	Kulingana na ombi
5556 14.000	57.88 mm	45.00 mm	150.00 mm	14.00 mm	14.00 mm	Kulingana na ombi
5556 18.000	81.56 mm	48.00 mm	150.00 mm	18.00 mm	18.00 mm	Kulingana na ombi