← Katalogi
Elekeza kidhibiti juu ya picha ili kukuza
6969
Multi-tooth end mill with corner radius GH 100 U
Multi-tooth end mill with corner radius GH 100 U. Designation: Multi-tooth end mill with corner radius GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844297746, Cutting material: Solid carbide, Surface: Raptor, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: long, Number of cutting edges range (from/to): 6, Type of machine interface: HB
Vipimo vya kiufundi
- EAN
- 4049844297746
- Type
- N
- Surface
- Raptor
- Designation
- Multi-tooth end mill with corner radius GH 100 U
- Helix angle
- 45
- Diameter range
- 6.000 mm – 20.000 mm
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 6
Vipimo na misimbo ya kuagizia
| Msimbo wa agizo | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Upatikanaji | Omba bei |
|---|---|---|---|---|---|---|---|
| 6969 10.015 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Kulingana na ombi | |
| 6969 10.005 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Kulingana na ombi | |
| 6969 20.015 | 44.60 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Kulingana na ombi | |
| 6969 20.005 | 44.60 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Kulingana na ombi | |
| 6969 8.010 | 22.20 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Kulingana na ombi | |
| 6969 8.015 | 22.20 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Kulingana na ombi | |
| 6969 8.020 | 22.20 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Kulingana na ombi | |
| 6969 12.005 | 30.80 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Kulingana na ombi | |
| 6969 12.020 | 30.80 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Kulingana na ombi | |
| 6969 6.010 | 15.40 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Kulingana na ombi | |
| 6969 8.005 | 22.20 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Kulingana na ombi | |
| 6969 20.010 | 44.60 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Kulingana na ombi | |
| 6969 16.005 | 38.40 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Kulingana na ombi | |
| 6969 16.020 | 38.40 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Kulingana na ombi | |
| 6969 12.010 | 30.80 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Kulingana na ombi | |
| 6969 10.010 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Kulingana na ombi | |
| 6969 10.020 | 26.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Kulingana na ombi | |
| 6969 16.015 | 38.40 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Kulingana na ombi | |
| 6969 16.010 | 38.40 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Kulingana na ombi | |
| 6969 20.020 | 44.60 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Kulingana na ombi | |
| 6969 12.015 | 30.80 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Kulingana na ombi | |
| 6969 6.005 | 15.40 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Kulingana na ombi |