Ratio end mill RF 100 F 90°

Ratio end mill RF 100 F 90°. Designation: Ratio end mill RF 100 F 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844154339, Cutting material: Solid carbide, Surface: nanoA, Type: N, Helix angle: 40/42, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Corner design: Schneidecke 90°, Feed direction: with drilling

Vipimo vya kiufundi

EAN: 4049844154339
Type: N
Surface: nanoA
Designation: Ratio end mill RF 100 F 90°
Helix angle: 40/42
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Vipimo na misimbo ya kuagizia

Msimbo wa agizo	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Upatikanaji
6764 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Kulingana na ombi
6764 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Kulingana na ombi
6764 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Kulingana na ombi
6764 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Kulingana na ombi
6764 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Kulingana na ombi
6764 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Kulingana na ombi
6764 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Kulingana na ombi
6764 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Kulingana na ombi
6764 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Kulingana na ombi