← Katalogi
Elekeza kidhibiti juu ya picha ili kukuza
3530
Side and face cutters
Side and face cutters. Designation: Side and face cutters, Diameter range: 50.000 mm – 200.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093382915, Surface: bright, Type: N, Corner design: Schneidecke 90°
Vipimo vya kiufundi
- EAN
- 4031093382915
- Type
- N
- Surface
- bright
- Designation
- Side and face cutters
- Corner design
- Schneidecke 90°
- Diameter range
- 50.000 mm – 200.000 mm
- Internal diameter
- 27.00 mm
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Vipimo na misimbo ya kuagizia
| Msimbo wa agizo | Flute length | Total length | Nominal diameter | Upatikanaji | Omba bei |
|---|---|---|---|---|---|
| 3530 80.002 | 8.00 mm | 8.00 mm | 80.00 mm | Kulingana na ombi | |
| 3530 100.001 | 8.00 mm | 8.00 mm | 100.00 mm | Kulingana na ombi | |
| 3530 100.005 | 16.00 mm | 16.00 mm | 100.00 mm | Kulingana na ombi | |
| 3530 100.002 | 10.00 mm | 10.00 mm | 100.00 mm | Kulingana na ombi | |
| 3530 63.004 | 12.00 mm | 12.00 mm | 63.00 mm | Kulingana na ombi | |
| 3530 125.006 | 18.00 mm | 18.00 mm | 125.00 mm | Kulingana na ombi | |
| 3530 125.001 | 8.00 mm | 8.00 mm | 125.00 mm | Kulingana na ombi | |
| 3530 80.000 | 5.00 mm | 5.00 mm | 80.00 mm | Kulingana na ombi | |
| 3530 160.003 | 14.00 mm | 14.00 mm | 160.00 mm | Kulingana na ombi | |
| 3530 160.001 | 10.00 mm | 10.00 mm | 160.00 mm | Kulingana na ombi | |
| 3530 63.002 | 8.00 mm | 8.00 mm | 63.00 mm | Kulingana na ombi | |
| 3530 125.004 | 14.00 mm | 14.00 mm | 125.00 mm | Kulingana na ombi | |
| 3530 63.003 | 10.00 mm | 10.00 mm | 63.00 mm | Kulingana na ombi | |
| 3530 200.004 | 18.00 mm | 18.00 mm | 200.00 mm | Kulingana na ombi | |
| 3530 80.003 | 10.00 mm | 10.00 mm | 80.00 mm | Kulingana na ombi | |
| 3530 63.000 | 5.00 mm | 5.00 mm | 63.00 mm | Kulingana na ombi | |
| 3530 125.007 | 20.00 mm | 20.00 mm | 125.00 mm | Kulingana na ombi | |
| 3530 125.002 | 10.00 mm | 10.00 mm | 125.00 mm | Kulingana na ombi | |
| 3530 63.001 | 6.00 mm | 6.00 mm | 63.00 mm | Kulingana na ombi | |
| 3530 100.007 | 20.00 mm | 20.00 mm | 100.00 mm | Kulingana na ombi | |
| 3530 100.000 | 6.00 mm | 6.00 mm | 100.00 mm | Kulingana na ombi | |
| 3530 50.003 | 8.00 mm | 8.00 mm | 50.00 mm | Kulingana na ombi | |
| 3530 125.005 | 16.00 mm | 16.00 mm | 125.00 mm | Kulingana na ombi | |
| 3530 200.005 | 20.00 mm | 20.00 mm | 200.00 mm | Kulingana na ombi | |
| 3530 80.006 | 16.00 mm | 16.00 mm | 80.00 mm | Kulingana na ombi | |
| 3530 50.000 | 4.00 mm | 4.00 mm | 50.00 mm | Kulingana na ombi | |
| 3530 80.001 | 6.00 mm | 6.00 mm | 80.00 mm | Kulingana na ombi | |
| 3530 160.002 | 12.00 mm | 12.00 mm | 160.00 mm | Kulingana na ombi | |
| 3530 80.004 | — | 12.00 mm | 80.00 mm | Kulingana na ombi | |
| 3530 160.006 | 20.00 mm | 20.00 mm | 160.00 mm | Kulingana na ombi | |
| 3530 200.002 | 14.00 mm | 14.00 mm | 200.00 mm | Kulingana na ombi | |
| 3530 100.003 | 12.00 mm | 12.00 mm | 100.00 mm | Kulingana na ombi | |
| 3530 100.004 | 14.00 mm | 14.00 mm | 100.00 mm | Kulingana na ombi | |
| 3530 50.002 | 6.00 mm | 6.00 mm | 50.00 mm | Kulingana na ombi | |
| 3530 125.000 | 6.00 mm | 6.00 mm | 125.00 mm | Kulingana na ombi |