Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093646420, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 45, Back rake angle: 25, Length picto milling: short, Number of cutting edges range (from/to): 2, Type of machine interface: HB, Corner design: Schneidecke 90°, Feed direction: with drilling

Vipimo vya kiufundi

EAN: 4031093646420
Type: W
Surface: bright
Designation: Slot drill (3-fluted)
Helix angle: 45
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 25
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: short
Type of machine interface: HB
Number of cutting edges range (from/to): 2

Vipimo na misimbo ya kuagizia

Msimbo wa agizo	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Upatikanaji
5542 4.000	8.00 mm	36.00 mm	54.00 mm	6.00 mm	4.00 mm	Kulingana na ombi
5542 5.000	10.00 mm	36.00 mm	54.00 mm	6.00 mm	5.00 mm	Kulingana na ombi
5542 3.000	7.00 mm	36.00 mm	50.00 mm	6.00 mm	3.00 mm	Kulingana na ombi
5542 10.000	19.00 mm	40.00 mm	66.00 mm	10.00 mm	10.00 mm	Kulingana na ombi
5542 14.000	24.00 mm	45.00 mm	75.00 mm	14.00 mm	14.00 mm	Kulingana na ombi
5542 16.000	27.00 mm	48.00 mm	82.00 mm	16.00 mm	16.00 mm	Kulingana na ombi
5542 20.000	34.00 mm	50.00 mm	92.00 mm	20.00 mm	20.00 mm	Kulingana na ombi
5542 18.000	30.00 mm	48.00 mm	84.00 mm	18.00 mm	18.00 mm	Kulingana na ombi
5542 8.000	16.00 mm	36.00 mm	58.00 mm	8.00 mm	8.00 mm	Kulingana na ombi
5542 6.000	13.00 mm	36.00 mm	54.00 mm	6.00 mm	6.00 mm	Kulingana na ombi
5542 12.000	21.00 mm	45.00 mm	73.00 mm	12.00 mm	12.00 mm	Kulingana na ombi