← Katalogi
Elekeza kidhibiti juu ya picha ili kukuza
3508
Standard Ratio end mill RF 100 U
Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844018525, Cutting material: Solid carbide, Product family: RF 100 U, Type: H, Helix angle: 30/32, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Feed direction: with drilling
Vipimo vya kiufundi
- EAN
- 4049844018525
- Type
- H
- Designation
- Standard Ratio end mill RF 100 U
- Helix angle
- 30/32
- Diameter range
- 6.000 mm – 25.000 mm
- Feed direction
- with drilling
- Product family
- RF 100 U
- Back rake angle
- 4
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
- Length picto milling
- long
- Type of machine interface
- HB
- Number of cutting edges range (from/to)
- 4
Vipimo na misimbo ya kuagizia
| Msimbo wa agizo | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Upatikanaji | Omba bei |
|---|---|---|---|---|---|---|---|
| 3508 10.000 | 28.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | Kulingana na ombi | |
| 3508 8.000 | 24.00 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | Kulingana na ombi | |
| 3508 6.000 | 18.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | Kulingana na ombi | |
| 3508 16.000 | 42.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | Kulingana na ombi | |
| 3508 20.000 | 50.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | Kulingana na ombi | |
| 3508 12.000 | 34.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | Kulingana na ombi |