Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4031093779210, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HB, Corner design: Schneidecke 90°, Feed direction: with drilling

Технічні характеристики

EAN: 4031093779210
Type: N
Designation: Ball nose end mill (4-fluted)
Helix angle: 30
Corner design: Schneidecke 90°
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HB
Number of cutting edges range (from/to): 4

Розміри та коди для замовлення

Код для замовлення	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Наявність
5584 12.000	37.04 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	За запитом
5584 6.000	19.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	За запитом
5584 8.000	27.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	За запитом
5584 10.000	32.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	За запитом
5584 3.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	За запитом
5584 16.000	46.72 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	За запитом
5584 4.000	15.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	За запитом
5584 5.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	За запитом
5584 20.000	56.40 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	За запитом