← Каталог
Наведіть на зображення для збільшення
6704
Hard roughing end mill GS 100 H (fine teeth)
Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}], EAN: 4049844077270, Cutting material: Solid carbide, Surface: Signum, Type: H, Helix angle: 20, Back rake angle: 3, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA
Технічні характеристики
- EAN
- 4049844077270
- Type
- H
- Surface
- Signum
- Designation
- Hard roughing end mill GS 100 H (fine teeth)
- Helix angle
- 20
- Diameter range
- 6.000 mm – 25.000 mm
- Back rake angle
- 3
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"full"}]
- Length picto milling
- long
- Type of machine interface
- HA
- Number of cutting edges range (from/to)
- 4
Розміри та коди для замовлення
| Код для замовлення | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Наявність | Запит ціни |
|---|---|---|---|---|---|---|---|
| 6704 10.000 | 30.00 mm | 40.00 mm | 72.00 mm | 10.00 mm | 10.00 mm | За запитом | |
| 6704 16.000 | 44.00 mm | 48.00 mm | 92.00 mm | 16.00 mm | 16.00 mm | За запитом | |
| 6704 6.000 | 19.00 mm | 36.00 mm | 57.00 mm | 6.00 mm | 6.00 mm | За запитом | |
| 6704 20.000 | 52.00 mm | 50.00 mm | 104.00 mm | 20.00 mm | 20.00 mm | За запитом | |
| 6704 12.000 | 36.00 mm | 45.00 mm | 83.00 mm | 12.00 mm | 12.00 mm | За запитом | |
| 6704 8.000 | 25.50 mm | 36.00 mm | 63.00 mm | 8.00 mm | 8.00 mm | За запитом | |
| 6704 25.000 | 63.00 mm | 56.00 mm | 121.00 mm | 25.00 mm | 25.00 mm | За запитом |