Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.175 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}], EAN: 4031093732420, Cutting material: Solid carbide, Product family: RF 100 U, Type: N, Helix angle: 35/38, Back rake angle: 4, Length picto milling: long, Number of cutting edges range (from/to): 4, Feed direction: with drilling

Specifiche tecniche

EAN: 4031093732420
Type: N
Designation: Standard Ratio end mill RF 100 U
Helix angle: 35/38
Diameter range: 3.175 mm – 31.750 mm
Feed direction: with drilling
Product family: RF 100 U
Back rake angle: 4
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"-"},{"attr":"H","val":"partial"}]
Length picto milling: long
Number of cutting edges range (from/to): 4

Dimensioni e codici d'ordine

Codice d'ordine	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilità
3114 19.050	50.38 mm	51.22 mm	101.60 mm	19.05 mm	19.05 mm	Su richiesta
3114 4.760	19.33 mm	31.47 mm	50.80 mm	4.76 mm	4.76 mm	Su richiesta
3114 6.350	23.45 mm	40.05 mm	63.50 mm	6.35 mm	6.35 mm	Su richiesta
3114 25.400	54.51 mm	47.09 mm	101.60 mm	25.40 mm	25.40 mm	Su richiesta
3114 7.940	25.82 mm	37.68 mm	63.50 mm	7.94 mm	7.94 mm	Su richiesta
3114 9.520	31.88 mm	31.62 mm	63.50 mm	9.53 mm	9.53 mm	Su richiesta
3114 11.110	32.95 mm	36.90 mm	69.85 mm	11.11 mm	11.11 mm	Su richiesta
3114 3.170	11.72 mm	39.08 mm	50.80 mm	3.17 mm	3.17 mm	Su richiesta
3114 31.750	84.14 mm	68.26 mm	152.40 mm	31.75 mm	31.75 mm	Su richiesta
3114 12.700	34.01 mm	42.19 mm	76.20 mm	12.70 mm	12.70 mm	Su richiesta
3114 15.870	42.32 mm	46.58 mm	88.90 mm	15.88 mm	15.88 mm	Su richiesta