HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844394902, Cutting material: Solid carbide, Type: N, Helix angle: 35/38, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 4, Type of machine interface: HA, Feed direction: with drilling

Teknikol spesifikesen

EAN: 4049844394902
Type: N
Designation: HPC end mills (4-fluted)
Helix angle: 35/38
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 4

Ol saes mo oda kod

Oda kod	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	I stap o no stap
19940 3.000	10.50 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Long rikwes nomo
19940 20.000	50.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Long rikwes nomo
19940 14.000	35.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Long rikwes nomo
19940 10.000	28.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Long rikwes nomo
19940 16.000	42.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Long rikwes nomo
19940 12.000	34.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Long rikwes nomo
19940 5.000	16.50 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Long rikwes nomo
19940 4.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Long rikwes nomo
19940 8.000	24.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Long rikwes nomo
19940 6.000	18.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Long rikwes nomo