Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}], EAN: 4049844492691, Cutting material: Solid carbide, Surface: AlCrN, Type: N, Helix angle: 38, Back rake angle: 12, Length picto milling: medium, Number of cutting edges range (from/to): 4, Type of machine interface: ~HB, Feed direction: with drilling

Teknikol spesifikesen

EAN: 4049844492691
Type: N
Surface: AlCrN
Designation: Ratio end mill RF 100 Sharp
Helix angle: 38
Diameter range: 1.590 mm – 25.400 mm
Feed direction: with drilling
Back rake angle: 12
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"-"}]
Length picto milling: medium
Type of machine interface: ~HB
Number of cutting edges range (from/to): 4

Ol saes mo oda kod

Oda kod	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	I stap o no stap
6485 6.350	23.18 mm	35.00 mm	76.20 mm	6.35 mm	6.35 mm	Long rikwes nomo
6485 9.520	31.50 mm	36.00 mm	88.90 mm	9.53 mm	9.53 mm	Long rikwes nomo
6485 7.940	27.78 mm	36.00 mm	82.55 mm	7.94 mm	7.94 mm	Long rikwes nomo
6485 1.590	5.88 mm	34.10 mm	50.80 mm	4.76 mm	1.59 mm	Long rikwes nomo
6485 11.110	38.86 mm	37.20 mm	101.60 mm	11.11 mm	11.11 mm	Long rikwes nomo
6485 12.700	39.88 mm	45.20 mm	101.60 mm	12.70 mm	12.70 mm	Long rikwes nomo
6485 19.050	52.70 mm	51.60 mm	127.00 mm	19.05 mm	19.05 mm	Long rikwes nomo
6485 4.760	18.97 mm	35.00 mm	76.20 mm	6.35 mm	4.76 mm	Long rikwes nomo
6485 3.170	11.75 mm	28.20 mm	50.80 mm	4.76 mm	3.17 mm	Long rikwes nomo
6485 15.870	48.26 mm	48.40 mm	127.00 mm	15.88 mm	15.88 mm	Long rikwes nomo
6485 25.400	66.04 mm	58.00 mm	152.40 mm	25.40 mm	25.40 mm	Long rikwes nomo