← Katalogu
Kaloni kursorin mbi imazh për ta zmadhuar
3086
Slot drill GH 100 U (3-fluted)
Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.590 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}], EAN: 4049844003699, Cutting material: Solid carbide, Type: N, Helix angle: 45, Back rake angle: 7, Length picto milling: short, Number of cutting edges range (from/to): 3, Feed direction: with drilling
Specifikimet teknike
- EAN
- 4049844003699
- Type
- N
- Designation
- Slot drill GH 100 U (3-fluted)
- Helix angle
- 45
- Diameter range
- 1.590 mm – 12.700 mm
- Feed direction
- with drilling
- Back rake angle
- 7
- Cutting material
- Solid carbide
- TABLE_INFO_PASSON
- [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"-"},{"attr":"S","val":"partial"},{"attr":"H","val":"-"}]
- Length picto milling
- short
- Number of cutting edges range (from/to)
- 3
Përmasat dhe kodet e porosisë
| Kodi i porosisë | Flute length | Shank length | Total length | Shank diameter | Nominal diameter | Disponueshmëria | Kërkoni çmimin |
|---|---|---|---|---|---|---|---|
| 3086 1.590 | 5.20 mm | 30.90 mm | 38.10 mm | 3.17 mm | 1.59 mm | Sipas kërkesës | |
| 3086 11.110 | 25.00 mm | 38.50 mm | 63.50 mm | 11.11 mm | 11.11 mm | Sipas kërkesës | |
| 3086 9.520 | 24.00 mm | 26.80 mm | 50.80 mm | 9.53 mm | 9.53 mm | Sipas kërkesës | |
| 3086 12.700 | 26.00 mm | 37.50 mm | 63.50 mm | 12.70 mm | 12.70 mm | Sipas kërkesës | |
| 3086 3.170 | 9.50 mm | 28.60 mm | 38.10 mm | 3.17 mm | 3.17 mm | Sipas kërkesës | |
| 3086 4.760 | 13.50 mm | 37.30 mm | 50.80 mm | 4.76 mm | 4.76 mm | Sipas kërkesës | |
| 3086 7.940 | 19.70 mm | 31.10 mm | 50.80 mm | 7.94 mm | 7.94 mm | Sipas kërkesës | |
| 3086 6.350 | 19.70 mm | 31.10 mm | 50.80 mm | 6.35 mm | 6.35 mm | Sipas kërkesës |