Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}], EAN: 4049844217010, Cutting material: Solid carbide, Type: N, Helix angle: 30, Back rake angle: 9, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: ~HA/HA, Feed direction: with drilling

Spécifications techniques

EAN: 4049844217010
Type: N
Designation: Ball nose slot drill (2-fluted)
Helix angle: 30
Diameter range: 2.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 9
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"},{"attr":"N","val":"full"},{"attr":"S","val":"full"},{"attr":"H","val":"partial"}]
Length picto milling: long
Type of machine interface: ~HA/HA
Number of cutting edges range (from/to): 2

Dimensions et références de commande

Code commande	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Disponibilité
19968 18.000	50.00 mm	48.00 mm	100.00 mm	18.00 mm	18.00 mm	Sur demande
19968 6.000	17.50 mm	30.00 mm	50.00 mm	6.00 mm	6.00 mm	Sur demande
19968 2.000	8.50 mm	27.40 mm	40.00 mm	4.00 mm	2.00 mm	Sur demande
19968 4.000	13.00 mm	33.90 mm	50.00 mm	6.00 mm	4.00 mm	Sur demande
19968 20.000	52.00 mm	50.00 mm	100.00 mm	20.00 mm	20.00 mm	Sur demande
19968 3.000	10.75 mm	37.00 mm	50.00 mm	4.00 mm	3.00 mm	Sur demande
19968 10.000	32.50 mm	40.00 mm	70.00 mm	10.00 mm	10.00 mm	Sur demande
19968 8.000	28.20 mm	33.00 mm	60.00 mm	8.00 mm	8.00 mm	Sur demande
19968 14.000	40.00 mm	35.00 mm	75.00 mm	14.00 mm	14.00 mm	Sur demande
19968 5.000	16.25 mm	31.50 mm	50.00 mm	6.00 mm	5.00 mm	Sur demande
19968 12.000	38.60 mm	36.00 mm	75.00 mm	12.00 mm	12.00 mm	Sur demande
19968 16.000	42.00 mm	32.00 mm	75.00 mm	16.00 mm	16.00 mm	Sur demande