Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4031093673273, Cutting material: Solid carbide, Surface: bright, Type: W, Helix angle: 45, Back rake angle: 25, Length picto milling: long, Number of cutting edges range (from/to): 2, Type of machine interface: HA, Feed direction: with drilling

Diti gari beká

EAN: 4031093673273
Type: W
Surface: bright
Designation: Al slot drill (2-fluted)
Helix angle: 45
Diameter range: 3.000 mm – 20.000 mm
Feed direction: with drilling
Back rake angle: 25
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: HA
Number of cutting edges range (from/to): 2

Bogo a namba kosa

Namba oda	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Reko mitia
3309 12.000	31.00 mm	45.00 mm	83.00 mm	12.00 mm	12.00 mm	Benunu da
3309 4.000	11.00 mm	36.00 mm	57.00 mm	6.00 mm	4.00 mm	Benunu da
3309 14.001	36.00 mm	48.00 mm	92.00 mm	16.00 mm	14.00 mm	Benunu da
3309 14.000	32.00 mm	45.00 mm	83.00 mm	14.00 mm	14.00 mm	Benunu da
3309 20.000	46.00 mm	50.00 mm	104.00 mm	20.00 mm	20.00 mm	Benunu da
3309 18.001	44.00 mm	50.00 mm	104.00 mm	20.00 mm	18.00 mm	Benunu da
3309 3.000	10.00 mm	36.00 mm	57.00 mm	6.00 mm	3.00 mm	Benunu da
3309 18.000	38.00 mm	48.00 mm	92.00 mm	18.00 mm	18.00 mm	Benunu da
3309 6.000	16.00 mm	36.00 mm	57.00 mm	6.00 mm	6.00 mm	Benunu da
3309 10.000	27.00 mm	40.00 mm	72.00 mm	10.00 mm	10.00 mm	Benunu da
3309 5.000	14.00 mm	36.00 mm	57.00 mm	6.00 mm	5.00 mm	Benunu da
3309 8.000	23.00 mm	36.00 mm	63.00 mm	8.00 mm	8.00 mm	Benunu da
3309 16.000	37.00 mm	48.00 mm	92.00 mm	16.00 mm	16.00 mm	Benunu da