Buka sarama

Diti gari, bogo, a reko mitia sarama nonga nonga da domo.

3280 / 3280

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

5 sarama

5674

82° Countersink SpyroTec

82° Countersink SpyroTec. Designation: 82° Countersink SpyroTec, Diameter range: 6.350 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 sarama

5675

82° Countersink SpyroTec

82° Countersink SpyroTec. Designation: 82° Countersink SpyroTec, Diameter range: 6.350 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 sarama

294

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.190 mm – 7.940 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

7 sarama

292

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.190 mm – 7.940 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

7 sarama

594

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.190 mm – 7.940 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

8 sarama

595

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.190 mm – 6.350 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

8 sarama

956

Hand tap for BSW-threads

Hand tap for BSW-threads. Designation: Hand tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

20 sarama

955

Hand tap for BSW-threads

Hand tap for BSW-threads. Designation: Hand tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

22 sarama

957

Hand tap for BSW-threads

Hand tap for BSW-threads. Designation: Hand tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"

16 sarama

1585

Fluteless machine tap for UNF-threads

Fluteless machine tap for UNF-threads. Designation: Fluteless machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 sarama

1986

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

6 sarama

1974

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

3 sarama

1973

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

3 sarama

1975

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

1 sarama

1583

Fluteless machine tap for UNC-threads

2 sarama

2274

Fluteless machine tap for UNC-threads

5 sarama

2845

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

7 sarama

2841

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

Machine tap for UN-threads. Designation: Machine tap for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 sarama

940

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 sarama

933

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

5 sarama

934

Machine tap for BSW-threads

Machine tap for BSW-threads. Designation: Machine tap for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 sarama

881

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

7 sarama

4719

Shrink fit extension

Shrink fit extension. Designation: Shrink fit extension, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

51 sarama

1053

Chamfer collar

Chamfer collar. Designation: Chamfer collar, Nominal diameter: 1.05 mm, Total length: 23.80 mm, Internal diameter: 5.00 mm, EAN: 4031093279741

6 sarama

4401

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M5 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 sarama

4204

PCD cartridge

PCD cartridge. Designation: PCD cartridge, Diameter range: 30.000 mm – 30.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

3 sarama

5699

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M5 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 sarama

3191

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 15.875 mm, TABLE_INFO_PASSON: [{"at

7 sarama

3158

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

9 sarama

3101

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"at

6 sarama

3157

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

33 sarama

3160

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

9 sarama

3159

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

33 sarama

6841

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"at

6 sarama

6842

Ball nose hard profile cutter GF 300 B

Ball nose hard profile cutter GF 300 B. Designation: Ball nose hard profile cutter GF 300 B, Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"at

6 sarama

4419

Cooling adapter

Cooling adapter. Designation: Cooling adapter, Diameter range: 3 - 5, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"

1 sarama

4742

Induction shrink fit system

Induction shrink fit system. Designation: Induction shrink fit system, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 sarama

4752

Induction shrink fit system

Induction shrink fit system. Designation: Induction shrink fit system, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

2 sarama

1055

Chamfer collar

Chamfer collar. Designation: Chamfer collar, Total length: 1.00 mm, EAN: 4031093279888

2 sarama

7726

Indexable insert

Indexable insert. Designation: Indexable insert, Diameter range: 1.000 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

2 sarama

1947

Round indexable insert

Round indexable insert. Designation: Round indexable insert, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

4 sarama

1437

Woodruff keys

Woodruff keys. Designation: Woodruff keys, Diameter range: 13.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

6 sarama

25172

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

1 sarama

25173

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

1 sarama

25181

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 sarama

25115

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

13 sarama

25221

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

3 sarama

25189

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 sarama

25205

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 sarama

25220

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

3 sarama

25196

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 sarama

25165

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 sarama

25188

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 sarama

25213

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 sarama

25157

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 sarama

25197

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 sarama

25180

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 sarama

25114

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

13 sarama

25236

Cutting insert for Torx

Cutting insert for Torx. Designation: Cutting insert for Torx, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

6 sarama

25132

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 sarama

25140

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 sarama

25074

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

27 sarama

25149

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 sarama

25133

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 sarama

25148

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 sarama

25125

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 sarama

25141

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 sarama

25106

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

22 sarama

25067

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 sarama

25156

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 sarama

25082

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

30 sarama

25212

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 sarama

25500

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

25164

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 sarama

25091

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

13 sarama

25228

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

5 sarama

25051

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 sarama

25124

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 sarama

25107

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

22 sarama

25609

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

1 sarama

25050

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 sarama

25059

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

51 sarama

25907

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

25232

Cutting insert for internal square

Cutting insert for internal square. Designation: Cutting insert for internal square, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

5 sarama

25812

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

4 sarama

25066

Cutting insert for boring out and profiling

28 sarama

25756

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 sarama

25820

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

4 sarama

25833

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

25780

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 sarama

25773

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 sarama

25889

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

25508

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

25797

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 sarama

25764

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 sarama

25902

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

2 sarama

25864

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

28 sarama

25840

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

25856

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

7 sarama

25709

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 sarama

25749

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

25716

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

36 sarama

25873

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

25748

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

25517

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 sarama

25757

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 sarama

25841

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

25058

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

51 sarama

25880

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 sarama

25509

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

25832

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

25700

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 sarama

25740

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

36 sarama

25865

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

28 sarama

25708

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 sarama

25717

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

36 sarama

25516

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

45 sarama

25701

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

54 sarama

25848

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

25872

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

25741

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

36 sarama

25888

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

35 sarama

4072

Chamfer collar

Chamfer collar. Designation: Chamfer collar, Total length: 11.00 mm, EAN: 4031093647847

2 sarama

4664

MAS/BT hydro expansion chuck

MAS/BT hydro expansion chuck. Designation: MAS/BT hydro expansion chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

1 sarama

4327

Synchro tapping chuck HSK-A

Synchro tapping chuck HSK-A. Designation: Synchro tapping chuck HSK-A, Diameter range: 4.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

5 sarama

4604

MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for manual tool change cycle HSK-A

4 sarama

4939

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 sarama

4663

SK hydro expansion chuck

SK hydro expansion chuck. Designation: SK hydro expansion chuck, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":

1 sarama

4619

SK hydro expansion chuck

SK hydro expansion chuck. Designation: SK hydro expansion chuck, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

3 sarama

4298

MQL synchro tapping chuck HSK-A for manual tool change

MQL synchro tapping chuck HSK-A for manual tool change. Designation: MQL synchro tapping chuck HSK-A for manual tool change, Diameter range: 4.5 - 20.0, TA

2 sarama

4343

HSK-A adaptor for tapping chucks

HSK-A adaptor for tapping chucks. Designation: HSK-A adaptor for tapping chucks, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"

4 sarama

4949

Coolant supply set for conventional cooling

Coolant supply set for conventional cooling. Designation: Coolant supply set for conventional cooling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

4241

Threaded pin for hydro clamping chucks

Threaded pin for hydro clamping chucks. Designation: Threaded pin for hydro clamping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

6 sarama

4328

Quick change tapping chuck HSK-A

Quick change tapping chuck HSK-A. Designation: Quick change tapping chuck HSK-A, Diameter range: M3.5 - M20, Internal diameter: 19.00 mm, TABLE_INFO_PASSON

2 sarama

4946

Tool setting fixture

Tool setting fixture. Designation: Tool setting fixture, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

4 sarama

4602

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for automatic tool change cycle

4 sarama

4615

Adapter for M contour clamping sets

Adapter for M contour clamping sets. Designation: Adapter for M contour clamping sets, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

7 sarama

4765

CAT shrink fit chuck

CAT shrink fit chuck. Designation: CAT shrink fit chuck, Internal diameter: 12.70 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

9 sarama

4790

MAS/BT DC shrink fit chuck with axial plane

MAS/BT DC shrink fit chuck with axial plane. Designation: MAS/BT DC shrink fit chuck with axial plane, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"a

11 sarama

4603

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A

MQL hydraulic synchro tapping chuck for automatic tool change cycle HSK-A. Designation: MQL hydraulic synchro tapping chuck for automatic tool change cycle

4 sarama

4596

HSK-A hydro expansion chuck slim design 3°

HSK-A hydro expansion chuck slim design 3°. Designation: HSK-A hydro expansion chuck slim design 3°, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr

16 sarama

4296

HSK-A hydro expansion chuck with radial length adjustment

HSK-A hydro expansion chuck with radial length adjustment. Designation: HSK-A hydro expansion chuck with radial length adjustment, Internal diameter: 12.00

38 sarama

4513

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 3.60 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

10 sarama

4206

Quick change tapping chuck adaptor

Quick change tapping chuck adaptor. Designation: Quick change tapping chuck adaptor, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

21 sarama

4231

ISO taper milling arbor

ISO taper milling arbor. Designation: ISO taper milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

9 sarama

4666

Hydraulic chucks set

Hydraulic chucks set. Designation: Hydraulic chucks set, Internal diameter: 20.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

4 sarama

4958

4-point clamping set

4-point clamping set. Designation: 4-point clamping set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

6 sarama

4243

HPC chuck CAT

HPC chuck CAT. Designation: HPC chuck CAT, Diameter range: 16.0 - 32.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val"

4 sarama

4557

Component part for clamping set

Component part for clamping set. Designation: Component part for clamping set, EAN: 4031093574532, Standard: Company std.

7 sarama

4741

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 20.

82 sarama

4729

ISO taper shrink fit chucks

ISO taper shrink fit chucks. Designation: ISO taper shrink fit chucks, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

18 sarama

4788

ISO taper shrink fit chuck, slim design 3°

ISO taper shrink fit chuck, slim design 3°. Designation: ISO taper shrink fit chuck, slim design 3°, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"att

33 sarama

4213

SK hydro expansion chuck with increased clamping force

SK hydro expansion chuck with increased clamping force. Designation: SK hydro expansion chuck with increased clamping force, Internal diameter: 10.00 mm, T

16 sarama

4764

Shrink fit chuck

Shrink fit chuck. Designation: Shrink fit chuck, Internal diameter: 18.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

34 sarama

4800

ISO taper milling arbor

ISO taper milling arbor. Designation: ISO taper milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

36 sarama

4787

HSK-A shrink fit chuck, slim design 3°

HSK-A shrink fit chuck, slim design 3°. Designation: HSK-A shrink fit chuck, slim design 3°, Internal diameter: 5.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

33 sarama

4618

HSK-A hydro expansion chuck

HSK-A hydro expansion chuck. Designation: HSK-A hydro expansion chuck, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","

15 sarama

4622

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Diameter range: 6 - 16, Internal diameter: 1.60 mm, TABLE_INFO_PASSON: [{"attr":"P

83 sarama

4728

MAS/BT shrink fit chuck

MAS/BT shrink fit chuck. Designation: MAS/BT shrink fit chuck, Internal diameter: 32.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-

10 sarama

4295

HSK-C hydro expansion chuck with radial length adjustment

HSK-C hydro expansion chuck with radial length adjustment. Designation: HSK-C hydro expansion chuck with radial length adjustment, Internal diameter: 32.00

22 sarama

4727

ISO taper shrink fit chucks

ISO taper shrink fit chucks. Designation: ISO taper shrink fit chucks, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

10 sarama

4726

HSK-A shrink fit chuck

HSK-A shrink fit chuck. Designation: HSK-A shrink fit chuck, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

20 sarama

4739

MAS/BT shrink fit chuck

MAS/BT shrink fit chuck. Designation: MAS/BT shrink fit chuck, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

52 sarama

4620

MAS/BT hydro expansion chuck

MAS/BT hydro expansion chuck. Designation: MAS/BT hydro expansion chuck, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 sarama

4554

Clamping set PowerClamp

Clamping set PowerClamp. Designation: Clamping set PowerClamp, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"a

7 sarama

4209

MQL hydro expansion chuck for manual tool change cylce HSK-A

MQL hydro expansion chuck for manual tool change cylce HSK-A. Designation: MQL hydro expansion chuck for manual tool change cylce HSK-A, Internal diameter:

46 sarama

4613

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 18.00 mm, TABLE_INFO_

200 sarama

4222

CAT milling arbor

CAT milling arbor. Designation: CAT milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

10 sarama

4940

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 sarama

4930

MQL clamping set

MQL clamping set. Designation: MQL clamping set, Internal diameter: 3.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

9 sarama

4915

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 390.00 mm, EAN: 4031093391610, Standard: Company std.

10 sarama

4341

MQL synchro tapping chuck HSK-A for automatic tool change cycle

MQL synchro tapping chuck HSK-A for automatic tool change cycle. Designation: MQL synchro tapping chuck HSK-A for automatic tool change cycle, Diameter ran

4 sarama

4330

MQL synchro tapping chuck HSK-A for automatic tool change cycle

MQL synchro tapping chuck HSK-A for automatic tool change cycle. Designation: MQL synchro tapping chuck HSK-A for automatic tool change cycle, Diameter ran

5 sarama

4612

MQL hydro expansion chuck for automatic tool change cycle HSK-A

MQL hydro expansion chuck for automatic tool change cycle HSK-A. Designation: MQL hydro expansion chuck for automatic tool change cycle HSK-A, Internal dia

119 sarama

4511

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

6 sarama

4361

Shell milling arbor

Shell milling arbor. Designation: Shell milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

22 sarama

4611

MQL hydro expansion chuck for manual tool change cylce HSK-A

MQL hydro expansion chuck for manual tool change cylce HSK-A. Designation: MQL hydro expansion chuck for manual tool change cylce HSK-A, Internal diameter:

119 sarama

4924

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 4.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

112 sarama

4508

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Internal diameter: 12.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 sarama

4623

MQL coolant supply set HSK-A

MQL coolant supply set HSK-A. Designation: MQL coolant supply set HSK-A, Diameter range: 20, Internal diameter: 3.40 mm, TABLE_INFO_PASSON: [{"attr":"P","v

83 sarama

4210

MQL hydro expansion chuck for automatic tool change cycle HSK-A

MQL hydro expansion chuck for automatic tool change cycle HSK-A. Designation: MQL hydro expansion chuck for automatic tool change cycle HSK-A, Internal dia

46 sarama

4221

MAS/BT hydro expansion chuck with increased clamping force

MAS/BT hydro expansion chuck with increased clamping force. Designation: MAS/BT hydro expansion chuck with increased clamping force, Internal diameter: 20.

25 sarama

4614

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 16.

200 sarama

4981

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 273.00 mm, EAN: 4049844495418, Standard: Company std.

1 sarama

4988

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 200.00 mm, EAN: 4049844300897, Standard: Company std., Form: E

1 sarama

4966

Torque wrench set

Torque wrench set. Designation: Torque wrench set, EAN: 4049844227118, Standard: Company std.

2 sarama

4987

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 100.00 mm, EAN: 4049844300903

1 sarama

4989

Torque wrench

Torque wrench. Designation: Torque wrench, Total length: 514.00 mm, EAN: 4049844300873, Standard: Company std.

2 sarama

4972

Mounting adapter

Mounting adapter. Designation: Mounting adapter, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

3 sarama

4990

Tool setting fixture

Tool setting fixture. Designation: Tool setting fixture, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

8 sarama

4979

Coolant supply set for conventional cooling

Coolant supply set for conventional cooling. Designation: Coolant supply set for conventional cooling, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

6021

Clamping strip for tool heads

Clamping strip for tool heads. Designation: Clamping strip for tool heads, Total length: 79.00 mm, EAN: 4031093571388

14 sarama

6155

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Total length: 10.00 mm, EAN: 4031093393553

20 sarama

6522

Clamping claw

Clamping claw. Designation: Clamping claw, Total length: 11.00 mm, EAN: 4049844400979

8 sarama

4962

Company std.

Company std.. Total length: 1.00 mm, EAN: 4031093567046

6 sarama

3168

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

3177

Slot drill GA 200 A (3-fluted)

Slot drill GA 200 A (3-fluted). Designation: Slot drill GA 200 A (3-fluted), Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

6 sarama

3175

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 6.350 mm – 15.875 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

4 sarama

3086

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.590 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

8 sarama

3171

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 sarama

3151

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 sarama

3149

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 sarama

19955

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 sarama

3088

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

3174

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 sarama

19954

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

19953

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 sarama

3173

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 sarama

3170

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

3172

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 sarama

3087

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 sarama

3148

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 sarama

3147

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 sarama

3092

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 sarama

19958

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 sarama

3169

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 sarama

19952

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

3146

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 sarama

4240

MAS/BT NC drilling chuck with internal cooling

MAS/BT NC drilling chuck with internal cooling. Designation: MAS/BT NC drilling chuck with internal cooling, Diameter range: 1.0 - 16, TABLE_INFO_PASSON: [

3 sarama

5496

PCD slot drill (3-fluted)

PCD slot drill (3-fluted). Designation: PCD slot drill (3-fluted), Diameter range: 14.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

8 sarama

5493

PCD slot drill (2-fluted)

PCD slot drill (2-fluted). Designation: PCD slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

19 sarama

4745

HSK holder

HSK holder. Designation: HSK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

6 sarama

4761

HSK holder

HSK holder. Designation: HSK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

6 sarama

4763

Swivel compartments

Swivel compartments. Designation: Swivel compartments, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

1 sarama

1054

Chamfer collar

Chamfer collar. Designation: Chamfer collar, Total length: 20.00 mm, EAN: 4031093279857, Surface: steam tempered

Mounting key for parting off blade. Designation: Mounting key for parting off blade, Total length: 120.00 mm, EAN: 4049844372719, Standard: Company std.

1 sarama

25922

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 58.00 mm, EAN: 4049844372702, Standard: Company std.

1 sarama

25904

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 90.60 mm, EAN: 4049844209961, Standard: Company std.

2 sarama

25900

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

1 sarama

3003

Milling arbor

Milling arbor. Designation: Milling arbor, Diameter range: 63.000 mm – 250.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},

2 sarama

3002

Milling arbor

Milling arbor. Designation: Milling arbor, Diameter range: 100.000 mm – 250.000 mm, Internal diameter: 40.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

5 sarama

4099

Extraction key for reduction bushes

Extraction key for reduction bushes. Designation: Extraction key for reduction bushes, EAN: 4031093736732, Standard: Company std.

1 sarama

4060

Threaded pin

Threaded pin. Designation: Threaded pin, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

2 sarama

4573

Retaining nut

Retaining nut. Designation: Retaining nut, Diameter range: 1.0 - 7.0, Total length: 16.20 mm, EAN: 4049844478770, Standard: Company std.

1 sarama

4744

SK holder

SK holder. Designation: SK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

3 sarama

4759

Control unit SpeedCooler

Control unit SpeedCooler. Designation: Control unit SpeedCooler, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"}

2 sarama

4747

SpeedCooler cooling system

SpeedCooler cooling system. Designation: SpeedCooler cooling system, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

3 sarama

4762

SK holder

SK holder. Designation: SK holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

3 sarama

4926

Pull stud SK

Pull stud SK. Designation: Pull stud SK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

3 sarama

4767

Coolant protection

Coolant protection. Designation: Coolant protection, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","

1 sarama

4927

Pull stud BT

Pull stud BT. Designation: Pull stud BT, Internal diameter: 8.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

7 sarama

4947

HSK cleaning cap

HSK cleaning cap. Designation: HSK cleaning cap, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

5 sarama

4925

Pull stud SK

Pull stud SK. Designation: Pull stud SK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

3 sarama

4624

Assembly tool

Assembly tool. Designation: Assembly tool, Total length: 132.00 mm, Internal diameter: 34.00 mm, EAN: 4049844115491, Standard: Company std.

6 sarama

4919

MQL adjusting screw

MQL adjusting screw. Designation: MQL adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

15 sarama

4913

Clamping key

Clamping key. Designation: Clamping key, Total length: 210.00 mm, EAN: 4031093391559, Standard: Company std., Form: C

15 sarama

4928

Pull stud BT

Pull stud BT. Designation: Pull stud BT, Internal diameter: 2.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

8 sarama

4910

Socket

Socket. Designation: Socket, Total length: 60.00 mm, EAN: 4031093574693, Standard: Company std.

6 sarama

4912

Hexagon key

Hexagon key. Designation: Hexagon key, Total length: 125.00 mm, EAN: 4049844099357, Standard: Company std.

25 sarama

4937

MQL HSK-A adjusting screw

MQL HSK-A adjusting screw. Designation: MQL HSK-A adjusting screw, Diameter range: 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

34 sarama

4555

Threaded spindle

Threaded spindle. Designation: Threaded spindle, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

7 sarama

4911

Socket

Socket. Designation: Socket, Total length: 171.00 mm, Internal diameter: 14.00 mm, EAN: 4031093554312, Standard: Company std.

6 sarama

4773

Cooling adapter

Cooling adapter. Designation: Cooling adapter, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

5 sarama

4909

Socket

Socket. Designation: Socket, Total length: 280.00 mm, EAN: 4031093391443, Standard: DIN 6368

7 sarama

4306

Retaining nut

Retaining nut. Designation: Retaining nut, Total length: 24.00 mm, EAN: 4031093659550, Standard: DIN ISO 15488, Form: D

32 sarama

4960

Torx Plus interchangeable blade

Torx Plus interchangeable blade. Designation: Torx Plus interchangeable blade, Total length: 175.00 mm, EAN: 4049844225275, Standard: Company std.

5 sarama

4994

Roller spanner for precision collet holders

Roller spanner for precision collet holders. Designation: Roller spanner for precision collet holders, Total length: 185.00 mm, Internal diameter: 16.00 mm

1 sarama

4995

Roller spanner insert for torque wrench

Roller spanner insert for torque wrench. Designation: Roller spanner insert for torque wrench, Total length: 45.00 mm, Internal diameter: 16.00 mm, EAN: 40

1 sarama

4992

Taper insert

Taper insert. Designation: Taper insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"

7 sarama

4986

Assembly tool

Assembly tool. Designation: Assembly tool, Total length: 37.80 mm, EAN: 4049844219809, Standard: Company std.

Round shank holder, clamping screw above, four clamping surfaces. Designation: Round shank holder, clamping screw above, four clamping surfaces, TABLE_INFO

8 sarama

3467

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

13 sarama

3466

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

21 sarama

3703

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

21 sarama

3704

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 sarama

6108

Clamping nut

Clamping nut. Designation: Clamping nut, Total length: 10.80 mm, EAN: 4049844400306, Standard: Company std.

2 sarama

6107

Clamping screw

Clamping screw. Designation: Clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

2 sarama

1003

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 sarama

1085

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

5 sarama

1188

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 sarama

1072

Clamping screw for chamfer collars

Clamping screw for chamfer collars. Designation: Clamping screw for chamfer collars, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

3 sarama

1067

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

1201

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 sarama

1059

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 sarama

1152

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 sarama

1063

Machine tap for UNJC-threads

Machine tap for UNJC-threads. Designation: Machine tap for UNJC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 sarama

1098

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

4 sarama

1061

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 sarama

1144

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

8 sarama

1090

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

12 sarama

1068

Machine tap for UNJF-threads

Machine tap for UNJF-threads. Designation: Machine tap for UNJF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

10 sarama

1091

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 sarama

1057

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 sarama

1007

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

15 sarama

1142

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

4 sarama

1065

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 sarama

1286

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 sarama

1285

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 sarama

1289

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 sarama

1818

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

7 sarama

1893

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 sarama

1293

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 sarama

1435

Draw-off nut

Draw-off nut. Designation: Draw-off nut, Total length: 15.00 mm, EAN: 4031093306515, Standard: Company std.

8 sarama

1575

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

1290

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 sarama

1578

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 sarama

1288

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 sarama

1294

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 sarama

1287

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 sarama

1691

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

6 sarama

1577

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

25912

Cylinder head screw

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 sarama

2922

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

20 sarama

3906

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

12 sarama

318

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

Adjusting screw for shrink fit chucks. Designation: Adjusting screw for shrink fit chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

6 sarama

4879

Torx Plus bit insert

Torx Plus bit insert. Designation: Torx Plus bit insert, Total length: 25.00 mm, EAN: 4049844710856, Standard: Company std.

5 sarama

4646

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

4637

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 sarama

4165

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 sarama

4305

Adjusting screw for synchro tapping chucks

Adjusting screw for synchro tapping chucks. Designation: Adjusting screw for synchro tapping chucks, Internal diameter: 4.10 mm, TABLE_INFO_PASSON: [{"attr

15 sarama

4931

Component part for clamping set

Component part for clamping set. Designation: Component part for clamping set, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 sarama

4389

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 sarama

4374

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

5 sarama

4391

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 sarama

4918

Cleaning mandrel

Cleaning mandrel. Designation: Cleaning mandrel, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val"

11 sarama

4914

Cleaning mandrels

Cleaning mandrels. Designation: Cleaning mandrels, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

14 sarama

4905

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

12 sarama

4466

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 sarama

4902

Adjusting screw for HSK-A/HSK-E collet holders

Adjusting screw for HSK-A/HSK-E collet holders. Designation: Adjusting screw for HSK-A/HSK-E collet holders, Diameter range: 2.5 - 6, TABLE_INFO_PASSON: [{

15 sarama

4649

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 sarama

4394

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 sarama

4166

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

2 sarama

4901

Adjusting screw for HSK-C collet holders

Adjusting screw for HSK-C collet holders. Designation: Adjusting screw for HSK-C collet holders, Diameter range: 6.0 - 10.0, TABLE_INFO_PASSON: [{"attr":"P

16 sarama

4908

Milling cutter retaining screw

Milling cutter retaining screw. Designation: Milling cutter retaining screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

7 sarama

4651

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

4425

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

4431

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

4125

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 sarama

4120

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 sarama

4907

Cylinder head screw

Cylinder head screw. Designation: Cylinder head screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

12 sarama

4650

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

4104

Locking washer

Locking washer. Designation: Locking washer, Total length: 1.80 mm, Internal diameter: 4.40 mm, EAN: 4031093745741, Standard: Company std.

4 sarama

4904

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

15 sarama

4456

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

4468

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 sarama

4430

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

4634

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

4921

Hexagon-socket offset screw keys

Hexagon-socket offset screw keys. Designation: Hexagon-socket offset screw keys, Total length: 41.30 mm, EAN: 4031093648868

11 sarama

4621

MQL HSK-A adjusting screw

MQL HSK-A adjusting screw. Designation: MQL HSK-A adjusting screw, Internal diameter: 4.10 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

71 sarama

4683

Machine tap for Rc (BSPT) threads

Machine tap for Rc (BSPT) threads. Designation: Machine tap for Rc (BSPT) threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"a

6 sarama

4900

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

7 sarama

4903

Clamping screw

Clamping screw. Designation: Clamping screw, Diameter range: 25, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{

12 sarama

4239

BT morse taper holder

BT morse taper holder. Designation: BT morse taper holder, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

12 sarama

4906

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Diameter range: 8.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

9 sarama

4122

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 sarama

4993

Plug insert

Plug insert. Designation: Plug insert, Total length: 1.00 mm, EAN: 4031093567183, Standard: Company std.

3 sarama

4985

HSK-C sealing plug

HSK-C sealing plug. Designation: HSK-C sealing plug, Total length: 66.00 mm, Shank length: 50.00 mm, EAN: 4031093566742, Standard: Company std., Type of ma

6 sarama

4980

Cleaning mandrels

Cleaning mandrels. Designation: Cleaning mandrels, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

4 sarama

4976

Centrifugal ring

Centrifugal ring. Designation: Centrifugal ring, Internal diameter: 50.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K"

6 sarama

4977

Adjusting screw for shrink fit chucks

Adjusting screw for shrink fit chucks. Designation: Adjusting screw for shrink fit chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

8 sarama

4961

Pressure ball screw

Pressure ball screw. Designation: Pressure ball screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

8 sarama

5497

Machine tap for UN-threads set

Machine tap for UN-threads set. Designation: Machine tap for UN-threads set, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

1 sarama

5559

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 sarama

5567

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 sarama

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

5755

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

3 sarama

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 sarama

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 sarama

6127

Threaded ring

Threaded ring. Designation: Threaded ring, Diameter range: 5.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"

3 sarama

5754

Adjusting screw

Adjusting screw. Designation: Adjusting screw, Internal diameter: 3.50 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

4 sarama

5722

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 sarama

6022

Adjusting screw

Adjusting screw. Designation: Adjusting screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"

3 sarama

6128

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

27 sarama

5766

Sealing plug

Sealing plug. Designation: Sealing plug, Diameter range: 13.0 - 20.0, Total length: 37.00 mm, Shank length: 20.00 mm, EAN: 4049844349605, Standard: Company

36 sarama

5751

Moulded steady rest bushing for two-fluted drills

Moulded steady rest bushing for two-fluted drills. Designation: Moulded steady rest bushing for two-fluted drills, Diameter range: 11.980 - 12.499, TABLE_I

84 sarama

5747

Drill bush

Drill bush. Designation: Drill bush, Diameter range: 0.900 mm – 40.000 mm, Nominal diameter: 5.30 mm, Total length: 16.00 mm, Internal diameter: 5.30 mm, E

156 sarama

5749

Steady rest bushing for single and two-fluted drills

Steady rest bushing for single and two-fluted drills. Designation: Steady rest bushing for single and two-fluted drills, Diameter range: 4.750 - 4.999, Int

180 sarama

5750

Moulded steady rest bushing for single-fluted gun drills

Moulded steady rest bushing for single-fluted gun drills. Designation: Moulded steady rest bushing for single-fluted gun drills, Diameter range: 5.500 - 5.

158 sarama

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

5767

Moulded steady rest bushing for single-fluted gun drills

Moulded steady rest bushing for single-fluted gun drills. Designation: Moulded steady rest bushing for single-fluted gun drills, Diameter range: 21.510 - 2

106 sarama

6435

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 sarama

6431

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 sarama

6276

CNMU indexable insert

CNMU indexable insert. Designation: CNMU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"full"},{"attr":"K","val":"partial"

2 sarama

6275

CNMU indexable insert

CNMU indexable insert. Designation: CNMU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 sarama

6342

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

6294

CNMG indexable insert

CNMG indexable insert. Designation: CNMG indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"

3 sarama

6394

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

6362

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 sarama

6396

TCHT indexable insert

6 sarama

6427

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

13 sarama

6393

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

6360

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 sarama

6370

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

6358

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 sarama

6345

TCHT indexable insert

CCHW indexable insert. Designation: CCHW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 sarama

6338

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

6323

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 sarama

6381

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 sarama

6349

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 sarama

6319

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

6206

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

13 sarama

6346

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 sarama

6359

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 sarama

6365

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 sarama

6355

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

11 sarama

6277

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

13 sarama

6296

CNMU indexable insert

CNMU indexable insert. Designation: CNMU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 sarama

6336

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 sarama

6339

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

6282

CCHX indexable insert

CCHX indexable insert. Designation: CCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

13 sarama

6369

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

6385

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 sarama

6352

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 sarama

6375

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 sarama

6341

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

6390

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

6327

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 sarama

6350

SCHW indexable insert

SCHW indexable insert. Designation: SCHW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

14 sarama

6211

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

12 sarama

6304

SCHX indexable insert

8 sarama

6340

TCHX indexable insert

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

6284

CCHX indexable insert

CCHX indexable insert. Designation: CCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

13 sarama

6325

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 sarama

6209

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

TCHX indexable insert. Designation: TCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 sarama

6297

CNMG indexable insert

CNMG indexable insert. Designation: CNMG indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"full"

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 sarama

6207

CNHX indexable insert

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

11 sarama

6317

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 sarama

6386

SCHX indexable insert

SCHX indexable insert. Designation: SCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

CNHX indexable insert. Designation: CNHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 sarama

6598

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

6656

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 sarama

6693

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

13 sarama

6535

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 sarama

6607

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

6613

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 sarama

6620

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

7 sarama

6609

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 sarama

6686

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 sarama

6664

CCHX indexable insert

CCHX indexable insert. Designation: CCHX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 sarama

6641

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 sarama

6648

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 sarama

6625

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 sarama

6687

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 sarama

6632

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 sarama

6608

TCHT indexable insert

7 sarama

6629

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 sarama

6606

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

6655

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"parti

7 sarama

6611

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 sarama

6640

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 sarama

6661

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

9 sarama

6622

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 sarama

6627

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 sarama

6647

SCHT indexable insert

11 sarama

6660

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"parti

11 sarama

6628

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 sarama

6635

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 sarama

6639

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 sarama

6680

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 sarama

6618

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

11 sarama

6630

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

11 sarama

6610

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

6 sarama

6688

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

13 sarama

6624

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

11 sarama

6597

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

11 sarama

6679

CCHT indexable insert

CCHT indexable insert. Designation: CCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

13 sarama

6626

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 sarama

6600

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

6616

SCHT indexable insert

SCHT indexable insert. Designation: SCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7466

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 sarama

7715

RNGN indexable insert

RNGN indexable insert. Designation: RNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 sarama

7849

DCGW indexable insert

2 sarama

7467

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 sarama

7735

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 sarama

7472

TNGN indexable insert

TNGN indexable insert. Designation: TNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 sarama

7745

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7839

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 sarama

7749

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 sarama

7764

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

3 sarama

7675

SCGW indexable insert

SCGW indexable insert. Designation: SCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

7 sarama

7455

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 sarama

7471

TNGN indexable insert

TNGN indexable insert. Designation: TNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

1 sarama

7743

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

7689

CNGN indexable insert

CNGN indexable insert. Designation: CNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

6907

SNHQ indexable insert

SNHQ indexable insert. Designation: SNHQ indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

1 sarama

7671

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7759

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 sarama

7760

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 sarama

7844

SCGT indexable insert with chip breaker

SCGT indexable insert with chip breaker. Designation: SCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 sarama

7838

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7799

CCGT indexable insert

CCGT indexable insert. Designation: CCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 sarama

7811

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7477

CNGN indexable insert

CNGN indexable insert. Designation: CNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

4 sarama

7754

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

3 sarama

7847

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 sarama

7736

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 sarama

7771

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7758

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 sarama

7713

CNGW indexable insert

CNGW indexable insert. Designation: CNGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 sarama

7748

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7757

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 sarama

7767

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

7688

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 sarama

7755

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

3 sarama

7805

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

7672

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7761

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 sarama

6911

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 sarama

7773

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7834

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 sarama

7740

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{

4 sarama

7676

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7798

CPGW indexable insert

CPGW indexable insert. Designation: CPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 sarama

7774

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7814

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 sarama

7478

SNGN indexable insert

SNGN indexable insert. Designation: SNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

5 sarama

6909

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 sarama

7742

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

7452

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 sarama

7716

SCGN indexable insert

SCGN indexable insert. Designation: SCGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 sarama

7445

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 sarama

7450

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 sarama

7802

CCGT indexable insert

CCGT indexable insert. Designation: CCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

3 sarama

7746

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

3 sarama

7815

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 sarama

7708

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

90° Chamfering milling cutter SpyroTec. Designation: 90° Chamfering milling cutter SpyroTec, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"at

6 sarama

7456

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 sarama

7752

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 sarama

7665

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 sarama

7709

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 sarama

7775

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 sarama

7723

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 sarama

6908

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 sarama

7451

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 sarama

767

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 sarama

7812

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7677

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7674

SCGW indexable insert

SCGW indexable insert. Designation: SCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

7 sarama

7476

RNGN indexable insert

RNGN indexable insert. Designation: RNGN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

3 sarama

7454

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

7 sarama

7804

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

7772

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7846

SCGT indexable insert with chip breaker

SCGT indexable insert with chip breaker. Designation: SCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 sarama

7828

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 sarama

7666

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

8 sarama

7664

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

8 sarama

7830

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 sarama

7744

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

6 sarama

7829

CCGT indexable insert with chip breaker

CCGT indexable insert with chip breaker. Designation: CCGT indexable insert with chip breaker, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 sarama

7765

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

3 sarama

7770

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7673

CCGW indexable insert

CCGW indexable insert. Designation: CCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7756

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

3 sarama

7447

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 sarama

7813

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","val":

6 sarama

7803

CCGT indexable insert

CCGT indexable insert. Designation: CCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 sarama

7762

CNMA indexable insert

CNMA indexable insert. Designation: CNMA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

3 sarama

7446

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

7 sarama

7668

CPGW indexable insert

CPGW indexable insert. Designation: CPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 sarama

6910

SNHU indexable insert

SNHU indexable insert. Designation: SNHU indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 sarama

7769

DCGW indexable insert

DCGW indexable insert. Designation: DCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7810

TNGA indexable insert

TNGA indexable insert. Designation: TNGA indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

6 sarama

7448

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 sarama

879

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 sarama

909

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 sarama

4397

Collet holder HSK-E

Collet holder HSK-E. Designation: Collet holder HSK-E, Diameter range: 1.0 - 13.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

12 sarama

4475

Collet holder HSK-E

Collet holder HSK-E. Designation: Collet holder HSK-E, Diameter range: 1.0 - 7.5, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

8 sarama

4476

Collet holder HSK-A

Collet holder HSK-A. Designation: Collet holder HSK-A, Diameter range: 1.0 - 7.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr"

8 sarama

4303

Collet holder HSK-C

Collet holder HSK-C. Designation: Collet holder HSK-C, Diameter range: 1.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

12 sarama

4323

Collet holder, sealed version HSK-C

Collet holder, sealed version HSK-C. Designation: Collet holder, sealed version HSK-C, Diameter range: 0.5 - 13.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-

12 sarama

4304

Collet holder HSK-A

Collet holder HSK-A. Designation: Collet holder HSK-A, Diameter range: 3.0 - 26.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

23 sarama

4245

Collet holder MAS/BT

Collet holder MAS/BT. Designation: Collet holder MAS/BT, Diameter range: 1.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

8 sarama

4324

Collet holder, sealed version HSK-A

Collet holder, sealed version HSK-A. Designation: Collet holder, sealed version HSK-A, Diameter range: 3.0 - 26.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-

21 sarama

4318

SK collet holder

SK collet holder. Designation: SK collet holder, Diameter range: 2.0 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

11 sarama

4827

SK collet holder

SK collet holder. Designation: SK collet holder, Diameter range: 0.5 - 10.0, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K",

27 sarama

3099

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 9.525 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val

4 sarama

3100

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 9.525 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

5 sarama

3188

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"at

7 sarama

3078

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

7 sarama

3081

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 sarama

3184

Roughing end mill GS 100 A (coarse teeth)

Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON:

7 sarama

3115

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 7.938 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":

6 sarama

3114

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.175 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 sarama

6484

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

10 sarama

3091

Multi-tooth end mill with corner radius GH 100 U

Multi-tooth end mill with corner radius GH 100 U. Designation: Multi-tooth end mill with corner radius GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABL

20 sarama

3322

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 sarama

6485

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

11 sarama

3166

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 sarama

3161

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

33 sarama

3165

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

33 sarama

3186

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"at

7 sarama

3182

Hard multi-tooth end mill GH 100 H

Hard multi-tooth end mill GH 100 H. Designation: Hard multi-tooth end mill GH 100 H, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P",

6 sarama

3162

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

8 sarama

3178

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 sarama

3082

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

3179

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 sarama

3080

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

13 sarama

3077

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 sarama

3180

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 sarama

3340

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":

17 sarama

3113

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 sarama

3181

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 sarama

4257

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 sarama

4265

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

10 sarama

4260

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 sarama

4251

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 sarama

4264

Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

4253

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 12.700 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","va

4 sarama

4259

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 sarama

3705

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 sarama

3432

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 16.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

5 sarama

4258

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 sarama

4256

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

4255

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PAS

9 sarama

4266

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 sarama

4263

Ratio end mill RF 100 SF

Ratio end mill RF 100 SF. Designation: Ratio end mill RF 100 SF, Diameter range: 4.763 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

4252

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 31.750 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 sarama

3876

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

17 sarama

4250

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.763 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

9 sarama

4254

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.175 mm – 25.400 mm, TABLE_INFO_PAS

10 sarama

4262

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 sarama

3429

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 8.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 sarama

7649

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 sarama

7644

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 sarama

6891

Ratio end mill RF 100 5 Speed

9 sarama

6774

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 4.763 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 sarama

6892

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

29 sarama

6462

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"

10 sarama

4326

Synchro tapping chuck with straight shank

Synchro tapping chuck with straight shank. Designation: Synchro tapping chuck with straight shank, Diameter range: 4.0 - 20.0, TABLE_INFO_PASSON: [{"attr":

2 sarama

4342

Quick change tapping chuck

Quick change tapping chuck. Designation: Quick change tapping chuck, Diameter range: M3 - M12, Internal diameter: 31.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

2 sarama

4340

Quick change tapping chuck

Quick change tapping chuck. Designation: Quick change tapping chuck, Diameter range: M3 - M12, Internal diameter: 31.00 mm, TABLE_INFO_PASSON: [{"attr":"P"

2 sarama

3145

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

5 sarama

3144

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 sarama

3142

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 sarama

3143

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

6 sarama

3452

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 sarama

3836

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

3458

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

26 sarama

3453

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

3460

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

3459

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 sarama

3694

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 sarama

3456

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 26.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

24 sarama

1199

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

118 sarama

3504

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 125.000 mm, Internal diameter: 22.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 sarama

3176

Quadrant milling cutter

Quadrant milling cutter. Designation: Quadrant milling cutter, Diameter range: 10.000 mm – 56.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr"

11 sarama

3342

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

12 sarama

3346

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

20 sarama

3343

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

20 sarama

3347

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

15 sarama

3433

End mill

End mill. Designation: End mill, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 sarama

3431

End mill

End mill. Designation: End mill, Diameter range: 3.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

20 sarama

Twist drills-Set

Twist drills-Set. Designation: Twist drills-Set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr

2 sarama

3530

Side and face cutters

Side and face cutters. Designation: Side and face cutters, Diameter range: 50.000 mm – 200.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr"

35 sarama

3579

Woodruff cutter

Woodruff cutter. Designation: Woodruff cutter, Diameter range: 4.500 mm – 45.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

21 sarama

3580

Woodruff cutter

Woodruff cutter. Designation: Woodruff cutter, Diameter range: 4.500 mm – 45.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

24 sarama

3700

End mill

End mill. Designation: End mill, Diameter range: 10.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val"

9 sarama

1131

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

44 sarama

1132

Twist drill with internal coolant duct

Twist drill with internal coolant duct. Designation: Twist drill with internal coolant duct, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

40 sarama

4105

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 30.00 - 31.99, TABLE_INFO_PASS

28 sarama

4106

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 sarama

4110

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

84 sarama

4107

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 sarama

4109

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

87 sarama

4108

Tool holder for interchangeable inserts HT 800

Tool holder for interchangeable inserts HT 800. Designation: Tool holder for interchangeable inserts HT 800, Diameter range: 25.00 - 25.49, TABLE_INFO_PASS

100 sarama

5242

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 34.51 - 37.50, TABLE_INFO_PASS

28 sarama

5243

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 37.51 - 40.50, TABLE_INFO_PASS

28 sarama

5248

Tool holder for interchangeable inserts RT 800

Tool holder for interchangeable inserts RT 800. Designation: Tool holder for interchangeable inserts RT 800, Diameter range: 20.01 - 21.00, TABLE_INFO_PASS

28 sarama

4208

HPC extension

HPC extension. Designation: HPC extension, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},

5 sarama

2016

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 sarama

2014

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 sarama

1261

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

1 sarama

1135

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

9 sarama

2045

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

20 sarama

1134

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

9 sarama

129

Twist drill with shank dia. 25.4 mm

Twist drill with shank dia. 25.4 mm. Designation: Twist drill with shank dia. 25.4 mm, Diameter range: 25.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"

15 sarama

128

Twist drill with shank dia. 16.0 mm

Twist drill with shank dia. 16.0 mm. Designation: Twist drill with shank dia. 16.0 mm, Diameter range: 16.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"

29 sarama

1263

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"

9 sarama

1224

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 30.160 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"att

28 sarama

1221

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

102 sarama

1223

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

106 sarama

1222

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 30.160 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":

22 sarama

136

Twist drill with shank dia. 25.4 mm

Twist drill with shank dia. 25.4 mm. Designation: Twist drill with shank dia. 25.4 mm, Diameter range: 25.000 mm – 39.000 mm, TABLE_INFO_PASSON: [{"attr":"

9 sarama

2047

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

97 sarama

2048

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

90 sarama

2458

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 0.400 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","va

149 sarama

2997

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

106 sarama

374

Twist drill with coolant duct, flute length DIN 1870

Twist drill with coolant duct, flute length DIN 1870. Designation: Twist drill with coolant duct, flute length DIN 1870, Diameter range: 11.000 mm – 34.000

23 sarama

351

Twist drill

Twist drill. Designation: Twist drill, Diameter range: 10.000 mm – 31.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"

10 sarama

3570

T-slot end mill

T-slot end mill. Designation: T-slot end mill, Diameter range: 12.500 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

9 sarama

363

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 7.000 mm – 46.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

56 sarama

336

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

209 sarama

330

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.450 mm – 35.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

173 sarama

381

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

7 sarama

5676

82° Countersink SpyroTec set

82° Countersink SpyroTec set. Designation: 82° Countersink SpyroTec set, Diameter range: 6.35 - 19.05, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

1 sarama

5538

90° countersink SpyroTec set

90° countersink SpyroTec set. Designation: 90° countersink SpyroTec set, Diameter range: 6.30 - 20.50, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

2 sarama

5539

90° countersink SpyroTec set

90° countersink SpyroTec set. Designation: 90° countersink SpyroTec set, Diameter range: 6.30 - 25.00, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

2 sarama

5680

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

8 sarama

5677

82° Countersink SpyroTec set

82° Countersink SpyroTec set. Designation: 82° Countersink SpyroTec set, Diameter range: 6.35 - 19.05, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

1 sarama

620

Extra length twist drill, series 1

Extra length twist drill, series 1. Designation: Extra length twist drill, series 1, Diameter range: 9.520 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

36 sarama

608

Twist drill, short

13 sarama

239

DIN 338

DIN 338. Total length: 49.00 mm, Shank diameter: 1.94 mm, EAN: 4031093422147

342 sarama

3663

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 sarama

3695

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 sarama

3664

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

24 sarama

3651

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.800 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

23 sarama

3451

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 sarama

417

Replacement blades for hand reamers

Replacement blades for hand reamers. Designation: Replacement blades for hand reamers, Diameter range: 24.00 - 27.50, TABLE_INFO_PASSON: [{"attr":"P","val"

20 sarama

4524

MQL synchro tapping chuck with straight shanks

MQL synchro tapping chuck with straight shanks. Designation: MQL synchro tapping chuck with straight shanks, Diameter range: 6.0 - 16.0, Internal diameter:

2 sarama

5492

PCD slot drill (2-fluted)

PCD slot drill (2-fluted). Designation: PCD slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

17 sarama

5495

PCD slot drill (3-fluted)

PCD slot drill (3-fluted). Designation: PCD slot drill (3-fluted), Diameter range: 14.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

8 sarama

3535

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 sarama

3537

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 sarama

3536

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 sarama

3534

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 sarama

4190

PCD Diver (3-fluted)

PCD Diver (3-fluted). Designation: PCD Diver (3-fluted), Diameter range: 12.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val

5 sarama

4400

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M10, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 sarama

5695

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M5 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 sarama

5698

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 sarama

5697

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M5 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 sarama

5696

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"att

1 sarama

851

Nut tap for ISO metric threads

Nut tap for ISO metric threads. Designation: Nut tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

12 sarama

891

Nut tap for ISO metric threads

Nut tap for ISO metric threads. Designation: Nut tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

108 sarama

892

Nut tap for ISO metric threads

Nut tap for ISO metric threads. Designation: Nut tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"

108 sarama

2017

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 sarama

2015

Tap set in cases

Tap set in cases. Designation: Tap set in cases, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

1 sarama

1319

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 6.600 mm – 21.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

5 sarama

1147

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.600 mm – 21.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

1136

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

9 sarama

1323

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 6.000 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"at

5 sarama

1133

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

9 sarama

1326

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 4.300 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

26 sarama

1576

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

250

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

238

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

249

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

286

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 2.000 mm – 3.150 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

1 sarama

280

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 3.150 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

5 sarama

282

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 5.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

7 sarama

284

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.250 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

5 sarama

283

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

13 sarama

289

Centre drills with flat

Centre drills with flat. Designation: Centre drills with flat, Diameter range: 1.600 mm – 5.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

6 sarama

287

Centre drills with flat

Centre drills with flat. Designation: Centre drills with flat, Diameter range: 1.600 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

9 sarama

285

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 1.000 mm – 6.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

8 sarama

288

Centre drills with flat

Centre drills with flat. Designation: Centre drills with flat, Diameter range: 2.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

8 sarama

281

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

13 sarama

3187

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 160.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

6 sarama

3185

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 125.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

6 sarama

487

Counterbore with pilots for tapping size holes

Counterbore with pilots for tapping size holes. Designation: Counterbore with pilots for tapping size holes, Diameter range: 18.000 mm – 33.000 mm, TABLE_I

3 sarama

437

90° Countersink for medium tolerances

90° Countersink for medium tolerances. Designation: 90° Countersink for medium tolerances, Diameter range: 6.600 mm – 21.500 mm, TABLE_INFO_PASSON: [{"attr

6 sarama

481

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 25.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

2 sarama

472

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 6.300 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

6 sarama

4636

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 sarama

3654

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 100.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

4 sarama

3749

Shell end mill

Shell end mill. Designation: Shell end mill, Diameter range: 40.000 mm – 100.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 sarama

463

Counterbore with interchangeable pilots

Counterbore with interchangeable pilots. Designation: Counterbore with interchangeable pilots, Diameter range: 15.000 mm – 63.000 mm, TABLE_INFO_PASSON: [{

8 sarama

471

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 16.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 sarama

483

Counterbore fixed pilots for medium tolerances

Counterbore fixed pilots for medium tolerances. Designation: Counterbore fixed pilots for medium tolerances, Diameter range: 6.000 mm – 20.000 mm, TABLE_IN

8 sarama

4648

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 sarama

477

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 15.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

17 sarama

325

Counterbore fixed pilots for medium tolerances

Counterbore fixed pilots for medium tolerances. Designation: Counterbore fixed pilots for medium tolerances, Diameter range: 6.000 mm – 18.000 mm, TABLE_IN

6 sarama

328

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 25.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

5 sarama

438

90° Countersink for tapping size holes

90° Countersink for tapping size holes. Designation: 90° Countersink for tapping size holes, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"at

6 sarama

379

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

474

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

4 sarama

479

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 16.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

1 sarama

326

Counterbore with pilots for tapping size holes

Counterbore with pilots for tapping size holes. Designation: Counterbore with pilots for tapping size holes, Diameter range: 6.000 mm – 20.000 mm, TABLE_IN

7 sarama

480

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 16.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"pa

1 sarama

380

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

378

Straight shank short step drills

Straight shank short step drills. Designation: Straight shank short step drills, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

486

Counterbore fixed pilots for medium tolerances

Counterbore fixed pilots for medium tolerances. Designation: Counterbore fixed pilots for medium tolerances, Diameter range: 18.000 mm – 40.000 mm, TABLE_I

6 sarama

475

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 16.000 mm – 100.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 sarama

482

Counterbore with pilots for fine tolerances

Counterbore with pilots for fine tolerances. Designation: Counterbore with pilots for fine tolerances, Diameter range: 2.200 mm – 20.000 mm, TABLE_INFO_PAS

13 sarama

324

Counterbore with pilots for fine tolerances

Counterbore with pilots for fine tolerances. Designation: Counterbore with pilots for fine tolerances, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PAS

7 sarama

485

Counterbore with pilots for fine tolerances

Counterbore with pilots for fine tolerances. Designation: Counterbore with pilots for fine tolerances, Diameter range: 18.000 mm – 40.000 mm, TABLE_INFO_PA

6 sarama

470

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

4 sarama

327

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 5.000 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

16 sarama

478

120° Countersink

120° Countersink. Designation: 120° Countersink, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

4 sarama

436

90° Countersink for fine tolerances

90° Countersink for fine tolerances. Designation: 90° Countersink for fine tolerances, Diameter range: 2.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P

12 sarama

484

Counterbore with pilots for tapping size holes

Counterbore with pilots for tapping size holes. Designation: Counterbore with pilots for tapping size holes, Diameter range: 6.000 mm – 20.000 mm, TABLE_IN

7 sarama

473

60° Countersink

60° Countersink. Designation: 60° Countersink, Diameter range: 16.000 mm – 80.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

8 sarama

476

90° Countersink

90° Countersink. Designation: 90° Countersink, Diameter range: 4.300 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"parti

60° Countersink SpyroTec set. Designation: 60° Countersink SpyroTec set, Diameter range: 6.30 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr"

1 sarama

559

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 6.350 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

7 sarama

5672

60° Countersink SpyroTec set

60° Countersink SpyroTec set. Designation: 60° Countersink SpyroTec set, Diameter range: 6.30 - 20.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr"

1 sarama

5670

60° Countersink SpyroTec

60° Countersink SpyroTec. Designation: 60° Countersink SpyroTec, Diameter range: 6.300 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 sarama

557

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

19 sarama

556

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

23 sarama

5679

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

16 sarama

5671

60° Countersink SpyroTec

60° Countersink SpyroTec. Designation: 60° Countersink SpyroTec, Diameter range: 6.300 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 sarama

568

NC spotting drill 90°

11 sarama

584

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.800 mm – 5.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

10 sarama

581

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 12.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

14 sarama

985

Set Hand taps for UNF-threads

Set Hand taps for UNF-threads. Designation: Set Hand taps for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

17 sarama

981

Set Hand taps for UNC-threads

Set Hand taps for UNC-threads. Designation: Set Hand taps for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

20 sarama

954

Set Hand taps for BSW-threads

Set Hand taps for BSW-threads. Designation: Set Hand taps for BSW-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

17 sarama

882

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

14 sarama

958

Set Hand taps for BSP-threads

Set Hand taps for BSP-threads. Designation: Set Hand taps for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K"

13 sarama

861

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

33 sarama

884

Set Hand taps for ISO metric fine threads

Set Hand taps for ISO metric fine threads. Designation: Set Hand taps for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

51 sarama

904

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-

10 sarama

3669

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

19 sarama

3698

Roughing/finishing end mills

Roughing/finishing end mills. Designation: Roughing/finishing end mills, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

12 sarama

3690

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

21 sarama

3706

Ratio end mill RF 40

Ratio end mill RF 40. Designation: Ratio end mill RF 40, Diameter range: 16.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","

5 sarama

3650

Roughing end mill

Roughing end mill. Designation: Roughing end mill, Diameter range: 6.000 mm – 36.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

15 sarama

3668

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 sarama

3660

Roughing end mill GS 40 (fine teeth)

Roughing end mill GS 40 (fine teeth). Designation: Roughing end mill GS 40 (fine teeth), Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":

17 sarama

6756

Roughing end mill GS 80 (fine teeth)

Roughing end mill GS 80 (fine teeth). Designation: Roughing end mill GS 80 (fine teeth), Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

13 sarama

3550

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

1 sarama

3517

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

5 sarama

3519

Thread milling cutter for UNF-threads

3 sarama

1897

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 sarama

1900

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 sarama

1898

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 sarama

1890

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 sarama

1249

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 sarama

1891

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 sarama

1991

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 sarama

1252

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

1087

Machine tap for NPT-threads

Machine tap for NPT-threads. Designation: Machine tap for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

6 sarama

1988

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 sarama

1907

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 sarama

1989

Machine tap for UNF-threads

12 sarama

1838

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

9 sarama

1980

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

8 sarama

1906

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

7 sarama

1871

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 sarama

1246

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 sarama

1872

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

14 sarama

1837

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

5 sarama

1979

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

11 sarama

1875

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

4 sarama

1892

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M"

4 sarama

1977

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

11 sarama

196

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 sarama

1088

Machine tap for NPT-threads

Machine tap for NPT-threads. Designation: Machine tap for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 sarama

8888

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

13 sarama

1915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

1084

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 sarama

8889

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

13 sarama

1914

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

1917

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 sarama

1981

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 sarama

1918

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 sarama

1876

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

8 sarama

2086

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 sarama

2087

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

13 sarama

2439

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

3 sarama

2511

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 sarama

2425

Machine tap for ISO metric threads

4 sarama

2513

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 sarama

2868

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

10 sarama

2898

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

7 sarama

2854

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

8 sarama

2881

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

9 sarama

2791

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 sarama

2710

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 sarama

2889

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 sarama

2876

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 sarama

2891

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

12 sarama

2870

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

13 sarama

2941

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 sarama

2790

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 sarama

2859

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

11 sarama

2895

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

5 sarama

2874

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 sarama

2899

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 sarama

2986

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 sarama

2990

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 sarama

2984

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 sarama

2985

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 sarama

2880

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

9 sarama

2942

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 sarama

2850

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

2858

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 sarama

2862

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 sarama

2846

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

9 sarama

2872

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"

9 sarama

2851

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

2844

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

8 sarama

4660

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

12 sarama

4657

Tap with coolant ducts for UNF threads

10 sarama

3984

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 sarama

3964

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 sarama

3982

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 sarama

3925

Machine tap for UNC-threads

9 sarama

4433

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

4685

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 sarama

3938

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

10 sarama

4392

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

17 sarama

4155

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 sarama

3950

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 sarama

319

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 sarama

3916

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 sarama

4424

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

4883

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 sarama

4423

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

4412

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

14 sarama

3923

Machine tap for UN-threads

Machine tap for UN-threads. Designation: Machine tap for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K"

22 sarama

3986

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 sarama

3980

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 sarama

3926

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 sarama

347

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

10 sarama

4645

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 sarama

3961

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 sarama

4035

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

11 sarama

4428

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

3981

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 sarama

4036

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

11 sarama

3901

Machine tap for UNC-threads

15 sarama

3971

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 sarama

3914

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 sarama

3928

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 sarama

3932

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 sarama

4415

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 sarama

4407

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

34 sarama

4627

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 sarama

4644

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 sarama

4429

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

4625

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 sarama

3945

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 sarama

4416

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

14 sarama

3917

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 sarama

4411

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 sarama

4886

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

31 sarama

4570

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 sarama

4406

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

25 sarama

4654

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

18 sarama

4887

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 sarama

4569

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 sarama

3915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 sarama

3931

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 sarama

3900

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

3904

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 sarama

362

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 sarama

3912

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 sarama

4422

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

3937

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

10 sarama

3922

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 sarama

4639

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 sarama

4410

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

26 sarama

3930

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 sarama

3927

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 sarama

4331

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 sarama

4633

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

3967

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 sarama

3983

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

10 sarama

4670

Machine tap for ISO metric threads

28 sarama

4154

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 sarama

4153

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 sarama

3965

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 sarama

4638

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 sarama

4034

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

11 sarama

4885

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

40 sarama

4409

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

30 sarama

4881

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

34 sarama

3947

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 sarama

4405

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

31 sarama

4218

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

25 sarama

3970

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

12 sarama

4408

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

29 sarama

4671

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 sarama

4630

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 sarama

3920

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 sarama

3918

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 sarama

4402

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

39 sarama

3919

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

22 sarama

5570

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 sarama

5569

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 sarama

5568

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 sarama

5563

Machine tap for ISO metric threads

9 sarama

5596

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

9 sarama

5561

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

9 sarama

5564

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 sarama

5554

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 sarama

5557

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 sarama

5551

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 sarama

5595

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 sarama

5572

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 sarama

5558

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 sarama

5552

Machine tap for ISO metric threads

10 sarama

5733

Machine tap for ISO metric threads

6 sarama

779

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 sarama

797

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 sarama

795

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 sarama

807

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 sarama

788

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 sarama

733

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 sarama

787

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

4 sarama

796

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

3 sarama

817

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 sarama

791

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 sarama

783

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 sarama

799

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 sarama

811

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

810

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

803

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 sarama

800

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 sarama

786

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

794

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 sarama

792

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

3 sarama

785

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 sarama

816

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

809

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

812

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

789

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

790

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 sarama

804

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

813

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 sarama

734

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

8 sarama

801

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 sarama

808

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

5 sarama

814

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

6 sarama

806

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 sarama

778

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 sarama

784

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

16 sarama

815

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

28 sarama

870

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

1 sarama

869

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

4 sarama

946

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 sarama

836

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

7 sarama

997

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 sarama

979

Machine tap for PG-threads

Machine tap for PG-threads. Designation: Machine tap for PG-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

9 sarama

912

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 sarama

876

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 sarama

950

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 sarama

980

Machine tap for PG-threads

Machine tap for PG-threads. Designation: Machine tap for PG-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val"

6 sarama

1069

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, Diameter range: M3 - M12, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

5 sarama

853

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val"

13 sarama

911

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

16 sarama

947

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

9 sarama

844

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

889

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

12 sarama

992

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

819

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

15 sarama

823

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

15 sarama

821

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

14 sarama

888

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 sarama

908

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

17 sarama

873

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

11 sarama

825

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 sarama

914

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

849

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 sarama

857

Set Hand taps for ISO metric threads

Set Hand taps for ISO metric threads. Designation: Set Hand taps for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

14 sarama

949

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 sarama

839

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

16 sarama

835

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 sarama

820

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

916

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 sarama

847

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

6 sarama

917

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 sarama

822

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

17 sarama

995

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

11 sarama

998

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 sarama

991

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

20 sarama

915

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

31 sarama

973

Machine tap for NPT-threads

Machine tap for NPT-threads. Designation: Machine tap for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","va

10 sarama

890

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 sarama

930

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

6 sarama

837

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

826

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

16 sarama

843

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

9 sarama

931

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

12 sarama

846

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

2 sarama

948

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

20 sarama

838

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 sarama

865

Tap for ISO metric threads

Tap for ISO metric threads. Designation: Tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

3 sarama

824

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

13 sarama

845

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

13 sarama

945

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

18 sarama

932

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

16 sarama

913

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

10 sarama

993

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

13 sarama

848

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

12 sarama

818

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"}

25 sarama

996

Machine tap for ISO metric threads

92 sarama

1028

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.500 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 sarama

1020

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 sarama

1024

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.100 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

4 sarama

1243

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 5.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

96 sarama

1242

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

123 sarama

1025

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

124 sarama

1027

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 19.500 mm, TABLE_INFO_PAS

29 sarama

1798

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

1 sarama

1702

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 14.500 mm, TABLE_INFO_PASSON: [{"attr":"P","v

106 sarama

1452

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

163 sarama

1451

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

116 sarama

25227

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

3 sarama

25226

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

3 sarama

25162

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 sarama

25190

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

7 sarama

25191

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 sarama

25297

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

4 sarama

25237

Cutting insert for Torx

Cutting insert for Torx. Designation: Cutting insert for Torx, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"f

6 sarama

25231

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

5 sarama

25218

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 sarama

25187

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 sarama

25203

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 sarama

25299

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

4 sarama

25186

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 sarama

25195

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 sarama

25202

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 sarama

2520

Round indexable insert

Round indexable insert. Designation: Round indexable insert, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

6 sarama

25229

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

5 sarama

25126

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 sarama

25222

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

3 sarama

25117

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

13 sarama

25151

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 sarama

25167

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 sarama

25116

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

13 sarama

25214

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 sarama

25178

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 sarama

25211

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 sarama

25171

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 sarama

25150

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 sarama

25182

Cutting insert for internal threading, full profile Whitworth

Cutting insert for internal threading, full profile Whitworth. Designation: Cutting insert for internal threading, full profile Whitworth, TABLE_INFO_PASSO

3 sarama

25121

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

13 sarama

25219

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 sarama

25296

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

4 sarama

25077

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

27 sarama

25235

Cutting insert for internal square

Cutting insert for internal square. Designation: Cutting insert for internal square, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"pa

5 sarama

25130

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 sarama

25170

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 sarama

25174

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 sarama

25154

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 sarama

25113

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

22 sarama

25120

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

13 sarama

25135

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 sarama

25081

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

27 sarama

25239

Cutting insert for Torx

Cutting insert for Torx. Designation: Cutting insert for Torx, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"partial"},{"attr":"K","v

6 sarama

25073

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 sarama

25093

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

13 sarama

25163

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 sarama

25076

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

27 sarama

25108

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

22 sarama

25206

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 sarama

25089

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

30 sarama

25057

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 sarama

25158

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 sarama

25138

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 sarama

25072

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 sarama

25194

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

6 sarama

25166

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

14 sarama

25109

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

22 sarama

25096

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

13 sarama

25233

Cutting insert for internal square

Cutting insert for internal square. Designation: Cutting insert for internal square, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"

5 sarama

25131

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 sarama

25088

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

30 sarama

25147

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 sarama

25215

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

6 sarama

25159

Cutting insert for internal threading, part profile - metric fine threads

Cutting insert for internal threading, part profile - metric fine threads. Designation: Cutting insert for internal threading, part profile - metric fine t

6 sarama

25139

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 sarama

25199

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 sarama

25134

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

14 sarama

25061

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

51 sarama

25175

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 sarama

25146

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 sarama

25085

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 sarama

25056

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 sarama

25179

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

7 sarama

25097

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

13 sarama

25084

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 sarama

25503

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 sarama

25112

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

22 sarama

25210

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 sarama

25223

Cutting insert for axial chamfering bores

Cutting insert for axial chamfering bores. Designation: Cutting insert for axial chamfering bores, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

3 sarama

25198

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

6 sarama

25064

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

51 sarama

25092

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

13 sarama

25207

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

6 sarama

25143

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 sarama

25142

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

13 sarama

27238

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

28 sarama

26604

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

1 sarama

25816

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

4 sarama

25648

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 sarama

27236

Cutting insert for axial grooving in holes, full radius slots

94 sarama

25677

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 sarama

25649

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 sarama

25739

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 sarama

25621

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 sarama

25622

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 sarama

27147

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 sarama

27290

Cutting insert for drilling into solid material and boring out Quattro Drill

Cutting insert for drilling into solid material and boring out Quattro Drill. Designation: Cutting insert for drilling into solid material and boring out Q

4 sarama

25636

Indexable insert for axial grooving, full radius slots

6 sarama

25630

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 sarama

25674

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 sarama

25643

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

2 sarama

27140

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

4 sarama

25799

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 sarama

27201

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

25639

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 sarama

25618

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 sarama

25811

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 sarama

25798

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 sarama

27135

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

6 sarama

25665

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 sarama

27244

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 sarama

25620

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 sarama

25670

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

4 sarama

27243

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 sarama

25862

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

7 sarama

25634

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 sarama

25879

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

25823

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

4 sarama

25795

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 sarama

25659

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 sarama

25069

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 sarama

27240

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 sarama

27148

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 sarama

27139

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 sarama

25675

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 sarama

27150

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 sarama

27142

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

4 sarama

27210

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 sarama

27100

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

25655

Indexable insert for external partial profile threading

4 sarama

27117

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

27138

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 sarama

25642

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"

2 sarama

25606

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 sarama

27124

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 sarama

26902

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 sarama

27120

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 sarama

25802

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 sarama

27229

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 sarama

27235

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 sarama

25601

Indexable insert for radial grooving external and internal

Indexable insert for radial grooving external and internal. Designation: Indexable insert for radial grooving external and internal, TABLE_INFO_PASSON: [{"

15 sarama

27211

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 sarama

27133

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

6 sarama

27205

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

27204

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

25846

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 sarama

27146

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

4 sarama

27116

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

25635

Indexable insert for axial grooving, full radius slots

Indexable insert for axial grooving, full radius slots. Designation: Indexable insert for axial grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":"P

4 sarama

25830

Cutting insert for internal threading, part profile trapezoidal thread

Cutting insert for internal threading, part profile trapezoidal thread. Designation: Cutting insert for internal threading, part profile trapezoidal thread

6 sarama

25803

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 sarama

27137

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 sarama

27136

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

6 sarama

25663

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 sarama

25806

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 sarama

27134

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

6 sarama

26904

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 sarama

25603

Indexable insert for radial grooving external and internal

Indexable insert for radial grooving external and internal. Designation: Indexable insert for radial grooving external and internal, TABLE_INFO_PASSON: [{"

15 sarama

25676

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 sarama

25790

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 sarama

25155

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

12 sarama

27149

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 sarama

25767

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 sarama

25615

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 sarama

27123

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 sarama

27103

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 sarama

25679

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 sarama

27125

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 sarama

25607

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 sarama

25810

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 sarama

27104

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 sarama

27111

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 sarama

25783

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 sarama

27128

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 sarama

25068

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 sarama

25838

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 sarama

27234

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 sarama

25669

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

4 sarama

25628

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 sarama

27246

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 sarama

25878

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

25786

Cutting insert for axial grooving in holes, straight slots

Cutting insert for axial grooving in holes, straight slots. Designation: Cutting insert for axial grooving in holes, straight slots, TABLE_INFO_PASSON: [{"

4 sarama

27109

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 sarama

27118

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 sarama

27110

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

8 sarama

27101

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

25510

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 sarama

25658

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 sarama

25819

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

4 sarama

27206

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 sarama

27228

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 sarama

25779

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 sarama

25667

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 sarama

27121

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 sarama

25774

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 sarama

26903

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 sarama

25738

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 sarama

25859

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 sarama

25614

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 sarama

25755

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

25794

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 sarama

25666

Indexable insert for external threading with full profile

Indexable insert for external threading with full profile. Designation: Indexable insert for external threading with full profile, TABLE_INFO_PASSON: [{"at

11 sarama

27218

Cutting insert for boring out and profiling

20 sarama

25898

Cutting insert for internal hexagon

Cutting insert for internal hexagon. Designation: Cutting insert for internal hexagon, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

4 sarama

25762

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 sarama

27105

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

25672

Indexable insert for threading Withworth

Indexable insert for threading Withworth. Designation: Indexable insert for threading Withworth, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

4 sarama

25719

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

36 sarama

25507

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 sarama

27108

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 sarama

25847

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 sarama

25656

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 sarama

25850

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 sarama

27227

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 sarama

25851

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 sarama

27207

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 sarama

25870

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

28 sarama

27102

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 sarama

25715

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 sarama

25706

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 sarama

25771

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 sarama

25613

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

15 sarama

25827

Cutting insert for internal threading, part profile trapezoidal thread

Cutting insert for internal threading, part profile trapezoidal thread. Designation: Cutting insert for internal threading, part profile trapezoidal thread

6 sarama

25754

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

27127

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 sarama

25707

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

54 sarama

27202

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 sarama

25750

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

27225

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 sarama

27224

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 sarama

25703

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

54 sarama

27222

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

6 sarama

25522

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 sarama

25623

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 sarama

25646

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

2 sarama

25883

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 sarama

25711

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 sarama

25060

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

51 sarama

25821

Cutting insert for broaching longitudinal slots

Cutting insert for broaching longitudinal slots. Designation: Cutting insert for broaching longitudinal slots, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

4 sarama

25631

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 sarama

27226

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

20 sarama

25894

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 sarama

25875

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

25855

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 sarama

27237

Cutting insert for axial grooving in holes, full radius slots

Cutting insert for axial grooving in holes, full radius slots. Designation: Cutting insert for axial grooving in holes, full radius slots, TABLE_INFO_PASSO

4 sarama

25511

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 sarama

25619

Indexable insert for external axial grooving

Indexable insert for external axial grooving. Designation: Indexable insert for external axial grooving, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

3 sarama

25502

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 sarama

25839

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 sarama

27242

Cutting insert for axial grooving studs, straight slots

Cutting insert for axial grooving studs, straight slots. Designation: Cutting insert for axial grooving studs, straight slots, TABLE_INFO_PASSON: [{"attr":

4 sarama

25722

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

36 sarama

27247

Cutting insert for axial grooving studs, full radius slots

Cutting insert for axial grooving studs, full radius slots. Designation: Cutting insert for axial grooving studs, full radius slots, TABLE_INFO_PASSON: [{"

4 sarama

25867

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

28 sarama

25751

Cutting insert for internal grooving, straight slots

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

25053

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

54 sarama

25714

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 sarama

25887

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 sarama

25723

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

36 sarama

27216

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

27217

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

27129

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 sarama

27130

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 sarama

25626

Indexable insert for axial grooving, straight slots

Indexable insert for axial grooving, straight slots. Designation: Indexable insert for axial grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","val

4 sarama

25518

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 sarama

26905

Cutting insert for internal pre-grooving and chamfering

Cutting insert for internal pre-grooving and chamfering. Designation: Cutting insert for internal pre-grooving and chamfering, TABLE_INFO_PASSON: [{"attr":

5 sarama

25657

Indexable insert for external partial profile threading

Indexable insert for external partial profile threading. Designation: Indexable insert for external partial profile threading, TABLE_INFO_PASSON: [{"attr":

12 sarama

27107

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 sarama

25519

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 sarama

25742

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

36 sarama

27106

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

10 sarama

27219

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 sarama

25842

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 sarama

25523

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

45 sarama

25758

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 sarama

25651

Indexable insert for parting off

Indexable insert for parting off. Designation: Indexable insert for parting off, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

2 sarama

25835

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 sarama

25843

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

35 sarama

25770

Cutting insert for internal threading, part profile - metric standard threads

Cutting insert for internal threading, part profile - metric standard threads. Designation: Cutting insert for internal threading, part profile - metric st

21 sarama

27203

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 sarama

25514

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 sarama

25743

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

36 sarama

27119

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

12 sarama

25702

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

54 sarama

25866

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

28 sarama

25895

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 sarama

25854

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"a

35 sarama

27200

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

27220

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 sarama

25775

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 sarama

25759

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 sarama

27221

Cutting insert for back boring and profiling

Cutting insert for back boring and profiling. Designation: Cutting insert for back boring and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 sarama

25678

Indexable insert for UNC/UNF threading

Indexable insert for UNC/UNF threading. Designation: Indexable insert for UNC/UNF threading, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

6 sarama

27230

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

20 sarama

25605

Indexable insert for radial grooving and external and internal copying

Indexable insert for radial grooving and external and internal copying. Designation: Indexable insert for radial grooving and external and internal copying

12 sarama

25778

Cutting insert for internal threading, full profile - metric standard threads

Cutting insert for internal threading, full profile - metric standard threads. Designation: Cutting insert for internal threading, full profile - metric st

28 sarama

25718

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

36 sarama

26906

Cutting insert for drilling into solid material and boring out Quattro Drill

Cutting insert for drilling into solid material and boring out Quattro Drill. Designation: Cutting insert for drilling into solid material and boring out Q

Cutting insert for internal grooving, straight slots. Designation: Cutting insert for internal grooving, straight slots, TABLE_INFO_PASSON: [{"attr":"P","v

21 sarama

25886

Cutting insert for internal grooving, full radius slots

Cutting insert for internal grooving, full radius slots. Designation: Cutting insert for internal grooving, full radius slots, TABLE_INFO_PASSON: [{"attr":

21 sarama

25871

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

28 sarama

25747

Cutting insert for boring out and chamfering

Cutting insert for boring out and chamfering. Designation: Cutting insert for boring out and chamfering, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

36 sarama

27151

Cutting insert for internal threading, partial profile - UN threads

Cutting insert for internal threading, partial profile - UN threads. Designation: Cutting insert for internal threading, partial profile - UN threads, TABL

5 sarama

25710

Cutting insert for boring out and profiling

Cutting insert for boring out and profiling. Designation: Cutting insert for boring out and profiling, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

45 sarama

5029

Indexable insert for single-fluted gun drill EB 800

Indexable insert for single-fluted gun drill EB 800. Designation: Indexable insert for single-fluted gun drill EB 800, Diameter range: 25.000 - 25.499, TAB

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

132 sarama

1032

Step ratio drill, 3-fluted

Step ratio drill, 3-fluted. Designation: Step ratio drill, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"att

14 sarama

3798

Al slot drill (2-fluted) set

Al slot drill (2-fluted) set. Designation: Al slot drill (2-fluted) set, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

1 sarama

3303

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 sarama

3709

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 sarama

3860

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 2.000 mm – 8.000 mm, TABLE_INFO_PA

5 sarama

3686

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

22 sarama

4269

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_P

24 sarama

3859

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_P

7 sarama

19991

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

8 sarama

3677

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 sarama

3684

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 0.300 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

32 sarama

19963

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 sarama

3203

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

25 sarama

3676

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

25 sarama

19962

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

1 sarama

5574

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

22 sarama

5573

Mini slot drill (3-fluted)

Mini slot drill (3-fluted). Designation: Mini slot drill (3-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

30 sarama

5030

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 25.000 - 25.499, T

400 sarama

5707

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 25.000 - 25.499, T

400 sarama

5703

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 50.000 - 50.499, T

400 sarama

5705

Supporting strip for single-fluted gun drills EB 800

Supporting strip for single-fluted gun drills EB 800. Designation: Supporting strip for single-fluted gun drills EB 800, Diameter range: 37.500 - 37.999, T

400 sarama

6013

90° front/back deburrer set

90° front/back deburrer set. Designation: 90° front/back deburrer set, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

2 sarama

513

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.000 mm – 13.000 mm, TABLE_INFO_PASSO

110 sarama

1056

VBMX indexable insert

VBMX indexable insert. Designation: VBMX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

3 sarama

1009

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 sarama

1161

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

10 sarama

1008

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

6 sarama

1047

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

71 sarama

1861

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 sarama

1927

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 sarama

1859

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 sarama

1883

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

5 sarama

1972

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 sarama

1858

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 sarama

1860

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 sarama

2311

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 sarama

1931

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

4 sarama

1581

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

10 sarama

2464

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 1.000 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

199 sarama

2463

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

205 sarama

2507

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

2 sarama

2518

Fluteless tap for ISO metric threads

Fluteless tap for ISO metric threads. Designation: Fluteless tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

6 sarama

2506

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 sarama

2510

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 sarama

2516

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

4 sarama

2485

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

71 sarama

2601

Twist drill, short

Twist drill, short. Designation: Twist drill, short, Diameter range: 3.170 mm – 12.700 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

98 sarama

4118

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 sarama

4181

CCHX indexable insert, external

CCHX indexable insert, external. Designation: CCHX indexable insert, external, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

2 sarama

2944

Machine tap for ISO metric threads

146 sarama

4025

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.500 mm – 25.650 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

91 sarama

2747

Interchangeable insert RT 800

Interchangeable insert RT 800. Designation: Interchangeable insert RT 800, Diameter range: 16.000 mm – 40.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

71 sarama

4113

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

152 sarama

4112

Interchangeable insert HT 800

Interchangeable insert HT 800. Designation: Interchangeable insert HT 800, Diameter range: 11.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

156 sarama

4599

Machine tap f. BSP-threads

Machine tap f. BSP-threads. Designation: Machine tap f. BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

4 sarama

4673

Machine tap for ISO metric threads

70 sarama

5593

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

9 sarama

6605

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"parti

7 sarama

6602

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 sarama

6237

DCMT indexable insert

DCMT indexable insert. Designation: DCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 sarama

6272

CCMT indexable insert

CCMT indexable insert. Designation: CCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 sarama

6238

TCMT indexable insert

TCMT indexable insert. Designation: TCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

6239

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 sarama

6995

90° chamfering milling cutter set SpyroTec

90° chamfering milling cutter set SpyroTec. Designation: 90° chamfering milling cutter set SpyroTec, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr

1 sarama

6601

TCHT indexable insert

TCHT indexable insert. Designation: TCHT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"full"},{"attr":"K","val":"pa

7 sarama

7654

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7652

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

4 sarama

7661

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

6994

90° chamfering milling cutter set SpyroTec

90° chamfering milling cutter set SpyroTec. Designation: 90° chamfering milling cutter set SpyroTec, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr

1 sarama

7636

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7650

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

4 sarama

7641

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 sarama

7640

SPGW indexable insert

SPGW indexable insert. Designation: SPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

1 sarama

7660

CCMT indexable insert

CCMT indexable insert. Designation: CCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"fu

6 sarama

7647

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7632

CPGW indexable insert

CPGW indexable insert. Designation: CPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

5 sarama

7651

SCMT indexable insert

SCMT indexable insert. Designation: SCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"attr":"K","val":"full"

4 sarama

7711

TCCN indexable insert

TCCN indexable insert. Designation: TCCN indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"at

2 sarama

724

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

12 sarama

736

Centre drills without flat

Centre drills without flat. Designation: Centre drills without flat, Diameter range: 0.500 mm – 6.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},

11 sarama

723

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"

13 sarama

7642

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 sarama

7658

CCMT indexable insert

CCMT indexable insert. Designation: CCMT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"full"},{"at

6 sarama

7635

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 sarama

942

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

5 sarama

7648

SPGT indexable insert

SPGT indexable insert. Designation: SPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7656

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7639

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7634

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7657

CCGX indexable insert

CCGX indexable insert. Designation: CCGX indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

6 sarama

6849

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 sarama

7638

TCGT indexable insert

TCGT indexable insert. Designation: TCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

5 sarama

7643

SCGT indexable insert

SCGT indexable insert. Designation: SCGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 sarama

7653

TPGW indexable insert

TPGW indexable insert. Designation: TPGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

7655

TPGT indexable insert

TPGT indexable insert. Designation: TPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

702

Twist drill extra-short

Twist drill extra-short. Designation: Twist drill extra-short, Diameter range: 0.490 mm – 6.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M",

92 sarama

7637

TCGW indexable insert

TCGW indexable insert. Designation: TCGW indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

2 sarama

7645

CPGT indexable insert

CPGT indexable insert. Designation: CPGT indexable insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"K","val":"pa

5 sarama

706

Twist drill long

Twist drill long. Designation: Twist drill long, Diameter range: 0.500 mm – 1.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 sarama

978

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 sarama

976

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

4 sarama

972

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

3 sarama

975

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

2 sarama

944

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

4 sarama

4128

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

12 sarama

3752

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

2 sarama

3751

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 sarama

4136

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 sarama

4135

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 sarama

3754

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 sarama

3768

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 sarama

4499

Micro thread milling cutter set for metric threads

Micro thread milling cutter set for metric threads. Designation: Micro thread milling cutter set for metric threads, Diameter range: M2 - M4, TABLE_INFO_PA

2 sarama

5547

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 sarama

4770

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 sarama

3744

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

6 sarama

3524

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 sarama

4130

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

6 sarama

3748

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 sarama

3770

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 sarama

4137

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 sarama

4162

External thread milling cutter for ISO metric threads

External thread milling cutter for ISO metric threads. Designation: External thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P",

9 sarama

3735

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 sarama

3772

Universal thread milling cutter for NPTF-threads

Universal thread milling cutter for NPTF-threads. Designation: Universal thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

2 sarama

4129

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

12 sarama

4133

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 sarama

3542

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 sarama

3769

Universal thread milling cutter for NPT-threads

Universal thread milling cutter for NPT-threads. Designation: Universal thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 sarama

3746

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 sarama

3771

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

1 sarama

3597

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

1 sarama

4134

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

9 sarama

3758

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 sarama

3753

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 sarama

3596

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

18 sarama

3740

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 sarama

3745

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 sarama

4780

Circular drill thread milling cutter for Whitworth pipe threads

Circular drill thread milling cutter for Whitworth pipe threads. Designation: Circular drill thread milling cutter for Whitworth pipe threads, TABLE_INFO_P

3 sarama

3750

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 sarama

4131

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

6 sarama

3756

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 sarama

4214

Micro thread milling cutter for MJ threads

Micro thread milling cutter for MJ threads. Designation: Micro thread milling cutter for MJ threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 sarama

3773

Universal thread milling cutter for NPTF-threads

Universal thread milling cutter for NPTF-threads. Designation: Universal thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

2 sarama

3557

Universal thread milling cutter for BSP- threads

Universal thread milling cutter for BSP- threads. Designation: Universal thread milling cutter for BSP- threads, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

3 sarama

3734

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

14 sarama

3755

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

4 sarama

4132

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 sarama

4700

Circular drill thread milling cutter for UNC and UNF threads

Circular drill thread milling cutter for UNC and UNF threads. Designation: Circular drill thread milling cutter for UNC and UNF threads, TABLE_INFO_PASSON:

23 sarama

3556

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 sarama

4226

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

14 sarama

4225

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

10 sarama

3541

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 sarama

3523

Universal thread milling cutter for ISO metric threads

Universal thread milling cutter for ISO metric threads. Designation: Universal thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P

17 sarama

3757

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 sarama

4228

Micro thread milling cutter for BSP-threads

Micro thread milling cutter for BSP-threads. Designation: Micro thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

4 sarama

4215

Micro thread milling cutter for UNJC/UNJF- threads

Micro thread milling cutter for UNJC/UNJF- threads. Designation: Micro thread milling cutter for UNJC/UNJF- threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 sarama

3737

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

17 sarama

4001

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

14 sarama

3595

Universal thread milling cutter for UN-threads

Universal thread milling cutter for UN-threads. Designation: Universal thread milling cutter for UN-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

13 sarama

4163

External thread milling cutter for ISO metric threads

External thread milling cutter for ISO metric threads. Designation: External thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P",

12 sarama

4002

Circular drill thread milling cutter for metric ISO threads

Circular drill thread milling cutter for metric ISO threads. Designation: Circular drill thread milling cutter for metric ISO threads, TABLE_INFO_PASSON: [

16 sarama

4227

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

10 sarama

4223

Micro thread milling cutter for UNC/UNF threads

Micro thread milling cutter for UNC/UNF threads. Designation: Micro thread milling cutter for UNC/UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

23 sarama

3743

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

16 sarama

5548

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

7 sarama

4496

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 sarama

6486

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.35 - 12.7, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{

1 sarama

3209

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","va

7 sarama

19950

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

3598

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19951

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

3728

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 14.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val

2 sarama

3304

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

21 sarama

4372

Ratio end mill set RF 100 U (3-fluted cutter)

Ratio end mill set RF 100 U (3-fluted cutter). Designation: Ratio end mill set RF 100 U (3-fluted cutter), Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [

1 sarama

5582

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","va

5 sarama

6885

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

6834

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

11 sarama

6886

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

6845

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

12 sarama

6836

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 sarama

6853

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

11 sarama

6846

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

11 sarama

6844

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

12 sarama

6855

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

37 sarama

6852

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

17 sarama

4371

Ratio end mill set RF 100 INOX NF

Ratio end mill set RF 100 INOX NF. Designation: Ratio end mill set RF 100 INOX NF, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

1 sarama

4348

High-performance roughing end mill RS 100 F set

High-performance roughing end mill RS 100 F set. Designation: High-performance roughing end mill RS 100 F set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 sarama

3799

End mill (4-fluted) set

End mill (4-fluted) set. Designation: End mill (4-fluted) set, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

1 sarama

4347

High-performance roughing end mill RS 100 F set

High-performance roughing end mill RS 100 F set. Designation: High-performance roughing end mill RS 100 F set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 sarama

4370

Ratio end mill set RF 100 VA

Ratio end mill set RF 100 VA. Designation: Ratio end mill set RF 100 VA, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

1 sarama

6957

Ratio end mill set RF 100 5 Speed

Ratio end mill set RF 100 5 Speed. Designation: Ratio end mill set RF 100 5 Speed, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

2 sarama

4344

High-performance roughing end mill RS 100 U set

High-performance roughing end mill RS 100 U set. Designation: High-performance roughing end mill RS 100 U set, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSO

1 sarama

6758

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 1/4 - 5/8, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"a

1 sarama

6755

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

2 sarama

6754

Ratio end mill set RF 100 Diver

Ratio end mill set RF 100 Diver. Designation: Ratio end mill set RF 100 Diver, Diameter range: 5.7 - 15.6, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

2 sarama

5645

Ratio end mill set RF 100 U

Ratio end mill set RF 100 U. Designation: Ratio end mill set RF 100 U, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

1 sarama

6483

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

4 sarama

6482

Ratio end mill set RF 100 Sharp

Ratio end mill set RF 100 Sharp. Designation: Ratio end mill set RF 100 Sharp, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

4 sarama

5634

Ratio end mill set RF 100 U

Ratio end mill set RF 100 U. Designation: Ratio end mill set RF 100 U, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

1 sarama

4352

High-performance roughing end mill RS 100 U set

High-performance roughing end mill RS 100 U set. Designation: High-performance roughing end mill RS 100 U set, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSO

1 sarama

5635

Ratio end mill set RF 100 U

Ratio end mill set RF 100 U. Designation: Ratio end mill set RF 100 U, Diameter range: 6.0 - 16.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

1 sarama

6956

Ratio end mill set RF 100 5 Speed

62 sarama

2472

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

156 sarama

2718

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 15.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 sarama

5611

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

147 sarama

5612

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

104 sarama

5614

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

142 sarama

8621

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

150 sarama

8611

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

150 sarama

8610

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

150 sarama

8620

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

148 sarama

1210

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 5.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

4 sarama

4386

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

6 sarama

4387

Spindle flange SK/HSK-C

Spindle flange SK/HSK-C. Designation: Spindle flange SK/HSK-C, Internal diameter: 128.57 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

4 sarama

4385

Spindle mounting flange HSK

Spindle mounting flange HSK. Designation: Spindle mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

11 sarama

4582

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

4 sarama

4665

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 1/4", Internal diameter: 15.88 mm, T

10 sarama

4581

Spindle attachment mounting flange HSK

Spindle attachment mounting flange HSK. Designation: Spindle attachment mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"

7 sarama

4586

Spindle attachment flange HSK

Spindle attachment flange HSK. Designation: Spindle attachment flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","v

5 sarama

4363

Spindle attachment flange module 6x6 HSK

Spindle attachment flange module 6x6 HSK. Designation: Spindle attachment flange module 6x6 HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

6 sarama

4368

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 3.012 mm – 25.032 mm, Nominal diamet

28 sarama

4369

Reduction sleeve for hydro expansion chucks

Reduction sleeve for hydro expansion chucks. Designation: Reduction sleeve for hydro expansion chucks, Diameter range: 3.012 mm – 125.032 mm, Nominal diame

82 sarama

4584

Spindle mounting flange HSK

Spindle mounting flange HSK. Designation: Spindle mounting flange HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

6 sarama

4713

Spindle attachment flange module 4x4 HSK

Spindle attachment flange module 4x4 HSK. Designation: Spindle attachment flange module 4x4 HSK, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

6 sarama

19971

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

4 sarama

3049

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 sarama

3024

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

11 sarama

19969

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 sarama

5533

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 4.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

6 sarama

25306

Square shank holder, 90° offset and stepped, with IC

Square shank holder, 90° offset and stepped, with IC. Designation: Square shank holder, 90° offset and stepped, with IC, TABLE_INFO_PASSON: [{"attr":"P","v

2 sarama

25312

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 sarama

25014

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 sarama

25020

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 sarama

25310

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

1 sarama

25003

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

7 sarama

25315

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 sarama

25015

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 sarama

25309

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 sarama

25303

Square shank holder, 90° offset and stepped without IC

Square shank holder, 90° offset and stepped without IC. Designation: Square shank holder, 90° offset and stepped without IC, TABLE_INFO_PASSON: [{"attr":"P

2 sarama

26103

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

17 sarama

25304

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 sarama

25004

Square shank holder, 90° offset and stepped without IC

Square shank holder, 90° offset and stepped without IC. Designation: Square shank holder, 90° offset and stepped without IC, TABLE_INFO_PASSON: [{"attr":"P

2 sarama

25010

Polygon shank holder, straight 0°

Polygon shank holder, straight 0°. Designation: Polygon shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

4 sarama

25363

Square shank holder, 45° offset, external machining without IC

Square shank holder, 45° offset, external machining without IC. Designation: Square shank holder, 45° offset, external machining without IC, TABLE_INFO_PAS

9 sarama

25364

Square shank holder, 45° offset, external machining with IC

Square shank holder, 45° offset, external machining with IC. Designation: Square shank holder, 45° offset, external machining with IC, TABLE_INFO_PASSON: [

8 sarama

25314

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 sarama

25002

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

7 sarama

25013

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 sarama

25005

Square shank holder, 90° offset and stepped, with IC

Square shank holder, 90° offset and stepped, with IC. Designation: Square shank holder, 90° offset and stepped, with IC, TABLE_INFO_PASSON: [{"attr":"P","v

2 sarama

25372

Square shank holder straight, for external machining with adjustable IC

Square shank holder straight, for external machining with adjustable IC. Designation: Square shank holder straight, for external machining with adjustable

12 sarama

25313

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-

2 sarama

25359

Square shank holder, 90° offset, external machining, with IC

Square shank holder, 90° offset, external machining, with IC. Designation: Square shank holder, 90° offset, external machining, with IC, TABLE_INFO_PASSON:

32 sarama

25365

Square shank holder, 45° offset, external machining with IC

Square shank holder, 45° offset, external machining with IC. Designation: Square shank holder, 45° offset, external machining with IC, TABLE_INFO_PASSON: [

8 sarama

25305

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 sarama

25353

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

32 sarama

25307

Polygon shank holder, straight 0°

Polygon shank holder, straight 0°. Designation: Polygon shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

4 sarama

25350

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

36 sarama

25357

Square shank holder, 90° offset, external machining, without IC

Square shank holder, 90° offset, external machining, without IC. Designation: Square shank holder, 90° offset, external machining, without IC, TABLE_INFO_P

36 sarama

25019

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 sarama

26101

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

17 sarama

25373

Square shank holder straight, for external machining with adjustable IC

Square shank holder straight, for external machining with adjustable IC. Designation: Square shank holder straight, for external machining with adjustable

12 sarama

25356

Square shank holder, 90° offset, external machining, without IC

Square shank holder, 90° offset, external machining, without IC. Designation: Square shank holder, 90° offset, external machining, without IC, TABLE_INFO_P

36 sarama

25308

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 sarama

25362

Square shank holder, 45° offset, external machining without IC

Square shank holder, 45° offset, external machining without IC. Designation: Square shank holder, 45° offset, external machining without IC, TABLE_INFO_PAS

9 sarama

26100

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

17 sarama

25012

Polygon shank holder, offset 90°

Polygon shank holder, offset 90°. Designation: Polygon shank holder, offset 90°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

4 sarama

26102

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

17 sarama

25352

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

Polygon shank holder, straight 0°. Designation: Polygon shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr

4 sarama

27054

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 sarama

27052

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 sarama

27009

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 sarama

4050

MQL mounting adapter set

MQL mounting adapter set. Designation: MQL mounting adapter set, Total length: 1.00 mm, EAN: 4049844097094

2 sarama

4038

Clamping force proofing instrument Senso 3000

Clamping force proofing instrument Senso 3000. Designation: Clamping force proofing instrument Senso 3000, EAN: 4031093703628

10 sarama

27007

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 sarama

27008

Square shank holder, straight 0°

Square shank holder, straight 0°. Designation: Square shank holder, straight 0°, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

6 sarama

27055

Square shank holder, 90° offset

Square shank holder, 90° offset. Designation: Square shank holder, 90° offset, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K

6 sarama

4237

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 45.500 mm, Internal diameter: 14.29 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

16 sarama

4235

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 10.000 mm – 45.500 mm, Internal diameter: 2.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

26 sarama

4335

Sealing washer

Sealing washer. Designation: Sealing washer, Total length: 4.00 mm, Internal diameter: 5.00 mm, EAN: 4049844009837, Standard: Company std.

144 sarama

4236

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 45.500 mm, Internal diameter: 3.17 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

20 sarama

4302

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 10.000 mm – 45.500 mm, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

38 sarama

4212

Clamping sleeve

Clamping sleeve. Designation: Clamping sleeve, Diameter range: 24.600 mm – 39.000 mm, Internal diameter: 15.88 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

4 sarama

4973

Clamping force measuring instrument

Clamping force measuring instrument. Designation: Clamping force measuring instrument, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

3 sarama

4715

Angle alignment unit

Angle alignment unit. Designation: Angle alignment unit, Total length: 19.00 mm, EAN: 4049844060609, Standard: Company std., Surface: bright

2 sarama

4974

Clamping force measuring instrument

Clamping force measuring instrument. Designation: Clamping force measuring instrument, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 sarama

5772

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 28.000 - 29.999, Total length: 12.00

24 sarama

5770

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 12.400 - 12.899, Total length: 4.00

86 sarama

5752

Sealing washer for single-fluted gun drills

Sealing washer for single-fluted gun drills. Designation: Sealing washer for single-fluted gun drills, Diameter range: 13.900 - 14.399, Total length: 4.00

113 sarama

5753

Sealing washer for two-fluted drills

Sealing washer for two-fluted drills. Designation: Sealing washer for two-fluted drills, Diameter range: 7.600 - 7.799, Total length: 4.00 mm, EAN: 4049844

80 sarama

4760

Shrink fit chuck flange module 4x4

Shrink fit chuck flange module 4x4. Designation: Shrink fit chuck flange module 4x4, Internal diameter: 14.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

11 sarama

4717

Shrink fit chuck flange module 6x6

Shrink fit chuck flange module 6x6. Designation: Shrink fit chuck flange module 6x6, Internal diameter: 6.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

11 sarama

4723

Alignment adapter HSK-A module 6x6

Alignment adapter HSK-A module 6x6. Designation: Alignment adapter HSK-A module 6x6, Internal diameter: 80.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

15 sarama

4724

Alignment adapter SK module 4x4

Alignment adapter SK module 4x4. Designation: Alignment adapter SK module 4x4, Internal diameter: 35.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

10 sarama

4725

Alignment adapter SK module 6x6

Alignment adapter SK module 6x6. Designation: Alignment adapter SK module 6x6, Internal diameter: 50.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

10 sarama

4297

Alignment adapter HSK-A module 4x4

Alignment adapter HSK-A module 4x4. Designation: Alignment adapter HSK-A module 4x4, Internal diameter: 40.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

15 sarama

4709

Alignment adapter BT module 4x4

Alignment adapter BT module 4x4. Designation: Alignment adapter BT module 4x4, Internal diameter: 60.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

12 sarama

4712

Alignment adapter BT module 6x6

Alignment adapter BT module 6x6. Designation: Alignment adapter BT module 6x6, Internal diameter: 35.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"at

12 sarama

5513

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

45 sarama

6070

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

66 sarama

6068

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

75 sarama

6069

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

67 sarama

770

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

70 sarama

769

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

66 sarama

768

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

112 sarama

5651

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

140 sarama

5650

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

141 sarama

6026

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

189 sarama

6025

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 sarama

6023

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

206 sarama

6024

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 sarama

19989

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 sarama

19987

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 sarama

3730

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 sarama

19993

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 sarama

3059

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 sarama

19995

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

10 sarama

19983

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

10 sarama

19997

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

10 sarama

3296

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 sarama

3294

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

3297

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

19 sarama

19985

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

3719

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 sarama

3286

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

15 sarama

3295

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

30 sarama

3634

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

12 sarama

3720

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 sarama

3126

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 sarama

3154

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

30 sarama

3729

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 sarama

5543

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 sarama

5542

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

11 sarama

5531

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 sarama

5546

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 sarama

5502

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

13 sarama

5530

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 sarama

4096

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 4.010 mm – 16.020 mm, Internal diameter: 14.00 m

8 sarama

4097

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 4.010 mm – 8.010 mm, Internal diameter: 4.00 mm,

3 sarama

4095

Reduction sleeve for floating holders

Reduction sleeve for floating holders. Designation: Reduction sleeve for floating holders, Diameter range: 14.020 mm – 25.032 mm, Internal diameter: 20.00

7 sarama

1438

Arbor, complete

Arbor, complete. Designation: Arbor, complete, Diameter range: 13.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

8 sarama

26201

Parting off blade with IC

Parting off blade with IC. Designation: Parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"}

4 sarama

26200

Parting off blade without IC

Parting off blade without IC. Designation: Parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val

4 sarama

4312

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, Diameter range: 32 mm – 32 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

1 sarama

4316

HSK-C driving key

HSK-C driving key. Designation: HSK-C driving key, Total length: 136.50 mm, EAN: 4031093548144, Type of machine interface: HSK-C

2 sarama

4319

SK driving key

SK driving key. Designation: SK driving key, Total length: 192.25 mm, EAN: 4031093548182, Type of machine interface: SK

7 sarama

4315

SK driving key

SK driving key. Designation: SK driving key, Total length: 189.95 mm, EAN: 4031093548120, Standard: Company std., Type of machine interface: SK

11 sarama

4355

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, Diameter range: 32 mm – 80 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

11 sarama

4975

Balancing masters

Balancing masters. Designation: Balancing masters, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","va

7 sarama

4991

Interchangeable disc

Interchangeable disc. Designation: Interchangeable disc, Total length: 30.00 mm, EAN: 4031093567114

8 sarama

Empty case

Empty case. Designation: Empty case, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr

5 sarama

4354

HSK-A/HSK-C reduction

HSK-A/HSK-C reduction. Designation: HSK-A/HSK-C reduction, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr"

4 sarama

4955

RFID data carrier

RFID data carrier. Designation: RFID data carrier, Diameter range: 10.000 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"}

3 sarama

1434

Arbor without accessories

Arbor without accessories. Designation: Arbor without accessories, Diameter range: 16.000 mm – 45.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr

7 sarama

4168

Without internal cooling

Without internal cooling. TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":"S","val"

4 sarama

773

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 5.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

8 sarama

3044

GF 200 B ball nose profile cutter

GF 200 B ball nose profile cutter. Designation: GF 200 B ball nose profile cutter, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 sarama

3679

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

17 sarama

3308

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 0.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

17 sarama

3030

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

7 sarama

19968

Ball nose slot drill (2-fluted)

Ball nose slot drill (2-fluted). Designation: Ball nose slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

12 sarama

3014

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

7 sarama

3045

GF 200 B ball nose profile cutter

GF 200 B ball nose profile cutter. Designation: GF 200 B ball nose profile cutter, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 sarama

19970

Ball nose slot drill XL (2-fluted)

Ball nose slot drill XL (2-fluted). Designation: Ball nose slot drill XL (2-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P",

7 sarama

3359

Ball nose hard profile cutter GF 300 B

8 sarama

6106

Locking disc

Locking disc. Designation: Locking disc, Total length: 5.00 mm, EAN: 4049844400030

2 sarama

Plastic stand only

Plastic stand only. Designation: Plastic stand only, Diameter range: 1/16 - 1/2, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 sarama

1040

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 41.000 mm – 90.000 mm, Internal diameter: 6.00 mm, TABLE

24 sarama

1041

High-performance reamer H7 series

High-performance reamer H7 series. Designation: High-performance reamer H7 series, Diameter range: 41.000 mm – 76.000 mm, Internal diameter: 6.00 mm, TABLE

24 sarama

4003

Adapter CAT to HSK-C

Adapter CAT to HSK-C. Designation: Adapter CAT to HSK-C, Diameter range: 63 mm – 63 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{

2 sarama

4076

Coolant supply measuring instrument CC 3000

Coolant supply measuring instrument CC 3000. Designation: Coolant supply measuring instrument CC 3000, Total length: 138.00 mm, EAN: 4031093766111

1 sarama

4510

Adaptor for tapping chucks

Adaptor for tapping chucks. Designation: Adaptor for tapping chucks, Diameter range: 63 mm – 100 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

5 sarama

4068

Flow rate measuring device PQ 3000

Flow rate measuring device PQ 3000. Designation: Flow rate measuring device PQ 3000, EAN: 4031093743662

1 sarama

4512

SK / HSK-C adaptor for tapping chucks

SK / HSK-C adaptor for tapping chucks. Designation: SK / HSK-C adaptor for tapping chucks, Diameter range: 32 mm – 100 mm, TABLE_INFO_PASSON: [{"attr":"P",

10 sarama

4514

MAS/BT / HSK-C adaptor for tapping chucks

MAS/BT / HSK-C adaptor for tapping chucks. Designation: MAS/BT / HSK-C adaptor for tapping chucks, Diameter range: 40 mm – 63 mm, TABLE_INFO_PASSON: [{"att

6 sarama

4746

Cable hoist

Cable hoist. Designation: Cable hoist, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"at

1 sarama

4616

Adapter for M contour clamping sets

Adapter for M contour clamping sets. Designation: Adapter for M contour clamping sets, Diameter range: 8 mm – 11 mm, Internal diameter: 6.00 mm, TABLE_INFO

6 sarama

4968

Taper measuring gauge for HSK shank

Taper measuring gauge for HSK shank. Designation: Taper measuring gauge for HSK shank, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

7 sarama

4936

Adapter for M contour clamping sets

Adapter for M contour clamping sets. Designation: Adapter for M contour clamping sets, Total length: 26.00 mm, EAN: 4031093774826

4 sarama

4948

HSK-A Mounting adapter

HSK-A Mounting adapter. Designation: HSK-A Mounting adapter, Total length: 46.10 mm, Shank diameter: 14.00 mm, EAN: 4049844010277

6 sarama

4922

Driver set

Driver set. Designation: Driver set, Diameter range: 16.000 mm – 50.000 mm, Nominal diameter: 32.00 mm, Total length: 20.00 mm, EAN: 4031093391771, Standar

6 sarama

4978

Measuring gauge for HSK clamping shoulders

Measuring gauge for HSK clamping shoulders. Designation: Measuring gauge for HSK clamping shoulders, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M"

7 sarama

4769

Stop disc

Stop disc. Designation: Stop disc, EAN: 4031093716260

8 sarama

4934

Adapter for MQL clamping sets

Adapter for MQL clamping sets. Designation: Adapter for MQL clamping sets, Diameter range: 4 mm – 12 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

17 sarama

4969

Measuring gauge for HSK spindles

Measuring gauge for HSK spindles. Designation: Measuring gauge for HSK spindles, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

7 sarama

4116

Floating holder with ER collet chuck holder

Floating holder with ER collet chuck holder. Designation: Floating holder with ER collet chuck holder, Diameter range: 3 - 20, TABLE_INFO_PASSON: [{"attr":

5 sarama

4117

Floating side lock holder

Floating side lock holder. Designation: Floating side lock holder, Diameter range: 16 - 25, Internal diameter: 25.00 mm, TABLE_INFO_PASSON: [{"attr":"P","v

5 sarama

1659

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

19 sarama

1673

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

60 sarama

1663

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

134 sarama

1662

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

141 sarama

1661

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 21.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

112 sarama

1660

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

135 sarama

2475

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.700 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

20 sarama

2478

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

40 sarama

2480

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

159 sarama

2479

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 2.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

202 sarama

2477

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

204 sarama

2712

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

18 sarama

2939

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PAS

25 sarama

2717

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

27 sarama

2713

Ratio drill without coolant ducts, 3-fluted

Ratio drill without coolant ducts, 3-fluted. Designation: Ratio drill without coolant ducts, 3-fluted, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

72 sarama

2996

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 2.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

160 sarama

2711

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

106 sarama

4044

Ratio drill with coolant ducts

163 sarama

5580

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

140 sarama

5514

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

189 sarama

5512

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

156 sarama

5714

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

155 sarama

6596

Pilot drill with coolant ducts

Pilot drill with coolant ducts. Designation: Pilot drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

205 sarama

8521

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

155 sarama

5510 SHOPT 20260821

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 3.300 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

5 sarama

3680

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 sarama

3558

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

16 sarama

19982

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

19996

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

12 sarama

3314

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 sarama

3310

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

11 sarama

3633

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 sarama

19990

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

11 sarama

3196

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

21 sarama

3194

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 sarama

19994

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

12 sarama

19984

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

19986

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

11 sarama

3361

Hard profile cutter with Torus grind GF 300 T

Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO

28 sarama

3021

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

13 sarama

19988

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

15 sarama

3560

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

31 sarama

3362

Hard profile cutter with Torus grind GF 300 T

Hard profile cutter with Torus grind GF 300 T. Designation: Hard profile cutter with Torus grind GF 300 T, Diameter range: 0.500 mm – 16.000 mm, TABLE_INFO

36 sarama

3358

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 5.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

6 sarama

3856

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_P

26 sarama

3309

Al slot drill (2-fluted)

Al slot drill (2-fluted). Designation: Al slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

13 sarama

3635

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

34 sarama

3011

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

13 sarama

3540

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 sarama

19992

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

11 sarama

3555

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

17 sarama

3193

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 sarama

3636

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

21 sarama

3559

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

20 sarama

3106

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

20 sarama

3367

Slot drill GA 200 A (3-fluted)

Slot drill GA 200 A (3-fluted). Designation: Slot drill GA 200 A (3-fluted), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

18 sarama

3195

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

33 sarama

3561

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

32 sarama

5507

Slot drill (3-fluted)

Slot drill (3-fluted). Designation: Slot drill (3-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

18 sarama

5743

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","va

10 sarama

5730

Slot drill (2-fluted)

Slot drill (2-fluted). Designation: Slot drill (2-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

14 sarama

6722

Slot drill with corner radius (2-fluted)

Slot drill with corner radius (2-fluted). Designation: Slot drill with corner radius (2-fluted), Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [

8 sarama

5549

Al slot drill XL (2-fluted)

Al slot drill XL (2-fluted). Designation: Al slot drill XL (2-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

11 sarama

4268

HSC profile cutter with Torus grind GF 500 T

HSC profile cutter with Torus grind GF 500 T. Designation: HSC profile cutter with Torus grind GF 500 T, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_P

24 sarama

5506

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

15 sarama

6721

Slot drill XL (3-fluted)

Slot drill XL (3-fluted). Designation: Slot drill XL (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 sarama

5505

Slot drill GH 100 U (3-fluted)

Slot drill GH 100 U (3-fluted). Designation: Slot drill GH 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

13 sarama

3396

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 sarama

5579

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 sarama

546

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

8 sarama

5649

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr"

7 sarama

6012

60° Chamfering milling cutter

60° Chamfering milling cutter. Designation: 60° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

4 sarama

6029

NC spotting drill 142°

NC spotting drill 142°. Designation: NC spotting drill 142°, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 sarama

6028

NC spotting drill 120°

NC spotting drill 120°. Designation: NC spotting drill 120°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

13 sarama

6015

120° Chamfering milling cutter

120° Chamfering milling cutter. Designation: 120° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

4 sarama

6027

NC spotting drill 90°

NC spotting drill 90°. Designation: NC spotting drill 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M",

13 sarama

6715

120° Chamfering milling cutter

120° Chamfering milling cutter. Designation: 120° Chamfering milling cutter, Diameter range: 6.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 sarama

6811

60° Chamfering milling cutter SpyroTec

60° Chamfering milling cutter SpyroTec. Designation: 60° Chamfering milling cutter SpyroTec, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

6 sarama

3766

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 sarama

3533

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 sarama

3760

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 sarama

3538

Thread milling cutter for NPT-threads

Thread milling cutter for NPT-threads. Designation: Thread milling cutter for NPT-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 sarama

3539

Thread milling cutter for NPTF-threads

Thread milling cutter for NPTF-threads. Designation: Thread milling cutter for NPTF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

3 sarama

3544

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 sarama

3529

Thread milling cutter for BSP-threads

Thread milling cutter for BSP-threads. Designation: Thread milling cutter for BSP-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

3 sarama

3546

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 sarama

3543

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

10 sarama

3545

Drill thread milling cutter for ISO metric fine threads

Drill thread milling cutter for ISO metric fine threads. Designation: Drill thread milling cutter for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":

12 sarama

4000

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

20 sarama

3366

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

6 sarama

3693

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 sarama

3894

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PAS

8 sarama

3522

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

3469

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

3896

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

6 sarama

3127

Roughing end mill GS 100 A (coarse teeth)

Roughing end mill GS 100 A (coarse teeth). Designation: Roughing end mill GS 100 A (coarse teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON:

9 sarama

3807

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

6 sarama

19941

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

3364

Roughing end mill GS 100 A (coarse teeth)

10 sarama

3885

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

5 sarama

3019

End mill

End mill. Designation: End mill, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 sarama

19977

End mill XL (4-fluted)

End mill XL (4-fluted). Designation: End mill XL (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

11 sarama

3200

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 sarama

3508

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

19973

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 sarama

19975

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 sarama

3204

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"at

11 sarama

3721

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 sarama

3718

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

19965

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 sarama

3026

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 sarama

3892

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

21 sarama

3499

Ratio end mill RF 100 Ti

Ratio end mill RF 100 Ti. Designation: Ratio end mill RF 100 Ti, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

48 sarama

19981

HPC end mills (4-fluted)

HPC end mills (4-fluted). Designation: HPC end mills (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

10 sarama

3898

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 sarama

3298

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

12 sarama

3873

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

22 sarama

3871

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

19979

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 sarama

3805

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 sarama

3285

End mill

End mill. Designation: End mill, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

14 sarama

3722

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 sarama

19967

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 sarama

3630

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 sarama

3731

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 sarama

3632

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

6 sarama

3047

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

11 sarama

3201

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 sarama

3313

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 sarama

3803

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

22 sarama

3890

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 sarama

3299

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

16 sarama

3471

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

5583

Hard roughing end mill GS 100 H (fine teeth)

Hard roughing end mill GS 100 H (fine teeth). Designation: Hard roughing end mill GS 100 H (fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_P

6 sarama

6731

Ratio end mill RF 100 AL

9 sarama

6882

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

6702

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 sarama

6727

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

5 sarama

6890

High-performance roughing end mill RS 100 F

High-performance roughing end mill RS 100 F. Designation: High-performance roughing end mill RS 100 F, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 sarama

6479

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 sarama

6726

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

6884

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

5655

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 sarama

6869

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

7 sarama

6703

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

5532

End mill (4-fluted)

End mill (4-fluted). Designation: End mill (4-fluted), Diameter range: 2.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

14 sarama

6733

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

5504

Roughing end mill GS 100 U(fine teeth)

Roughing end mill GS 100 U(fine teeth). Designation: Roughing end mill GS 100 U(fine teeth), Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

8 sarama

6871

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 sarama

6888

High-performance roughing end mill RS 100 U

High-performance roughing end mill RS 100 U. Designation: High-performance roughing end mill RS 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PAS

9 sarama

6798

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

21 sarama

5544

Roughing end mill (3-fluted)

Roughing end mill (3-fluted). Designation: Roughing end mill (3-fluted), Diameter range: 8.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

5 sarama

6861

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

24 sarama

5535

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 sarama

6804

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

19 sarama

5584

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 sarama

5654

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

6735

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

6802

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

7 sarama

6467

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 sarama

6708

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 sarama

6800

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"at

5 sarama

5534

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

8 sarama

6729

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

27 sarama

6760

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 sarama

6465

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 sarama

6710

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

9 sarama

6768

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

6728

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

8 sarama

6878

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

12 sarama

6481

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 sarama

5545

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

8 sarama

6959

Ratio end mill RF 100 Speed P

Ratio end mill RF 100 Speed P. Designation: Ratio end mill RF 100 Speed P, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 sarama

6781

Ratio end mill set RF 100 Speed

Ratio end mill set RF 100 Speed. Designation: Ratio end mill set RF 100 Speed, Diameter range: 6.0, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"

5 sarama

6971

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

25024

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 sarama

25321

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 sarama

25302

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 sarama

25006

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 sarama

25369

Round shank holder, internal machining without IC

Round shank holder, internal machining without IC. Designation: Round shank holder, internal machining without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-

24 sarama

25370

Round shank holder, internal machining with IC

Round shank holder, internal machining with IC. Designation: Round shank holder, internal machining with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

24 sarama

25371

Round shank holder, internal machining with IC

Round shank holder, internal machining with IC. Designation: Round shank holder, internal machining with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

24 sarama

25368

Round shank holder, internal machining without IC

Round shank holder, internal machining without IC. Designation: Round shank holder, internal machining without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-

24 sarama

27015

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 sarama

27016

Round shank holder for Star machine types, rear side machining

Round shank holder for Star machine types, rear side machining. Designation: Round shank holder for Star machine types, rear side machining, TABLE_INFO_PAS

2 sarama

27056

Round shank holder for broaching

Round shank holder for broaching. Designation: Round shank holder for broaching, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

5 sarama

4718

Driving key

Driving key. Designation: Driving key, Total length: 115.00 mm, Shank length: 50.00 mm, Shank diameter: 6.00 mm, Internal diameter: 6.00 mm, EAN: 404984410

29 sarama

1946

Twist drill with reinforced straight shank

Twist drill with reinforced straight shank. Designation: Twist drill with reinforced straight shank, Diameter range: 2.600 mm – 14.100 mm, TABLE_INFO_PASSO

20 sarama

5578

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 4.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

17 sarama

6788

Quadrant milling cutter

Quadrant milling cutter. Designation: Quadrant milling cutter, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

12 sarama

6992

90° Chamfering milling cutter SpyroTec

90° Chamfering milling cutter SpyroTec. Designation: 90° Chamfering milling cutter SpyroTec, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

6 sarama

6817

Ball nose end mill G-Mold µ 65 B

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19 sarama

6737

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

16 sarama

6818

Ball nose end mill G-Mold µ 65 B

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19 sarama

3520

Thread milling cutter for NPT-threads

10 sarama

3525

Thread milling cutter for ISO metric threads

10 sarama

3018

Ball nose end mill

Ball nose end mill. Designation: Ball nose end mill, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"

5 sarama

3897

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":

8 sarama

3895

Ratio end mill RF 100 H

Ratio end mill RF 100 H. Designation: Ratio end mill RF 100 H, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"att

6 sarama

19966

Roughing end mill with fine teeth

Roughing end mill with fine teeth. Designation: Roughing end mill with fine teeth, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

8 sarama

3507

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

3893

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PAS

8 sarama

3727

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 sarama

3473

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

3800

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

22 sarama

3202

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 sarama

3509

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

19972

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

11 sarama

3733

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

5 sarama

3839

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

19974

Multi-tooth end mill (6-fluted)

Multi-tooth end mill (6-fluted). Designation: Multi-tooth end mill (6-fluted), Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

10 sarama

3470

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

3629

Ratio end mill RF 100 F

Ratio end mill RF 100 F. Designation: Ratio end mill RF 100 F, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

8 sarama

3472

Ratio end mill RF 100 AL

6 sarama

3015

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

3691

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 sarama

3736

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

12 sarama

3208

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 sarama

3804

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

8 sarama

3043

Ball nose end mill XL (4-fluted)

Ball nose end mill XL (4-fluted). Designation: Ball nose end mill XL (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

3891

Ratio end mill standard RF 100 U (3-fluted)

Ratio end mill standard RF 100 U (3-fluted). Designation: Ratio end mill standard RF 100 U (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PAS

21 sarama

3563

Multi-tooth end mill with corner radius GH 100 U

Multi-tooth end mill with corner radius GH 100 U. Designation: Multi-tooth end mill with corner radius GH 100 U, Diameter range: 3.000 mm – 20.000 mm, TABL

31 sarama

3872

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

22 sarama

3806

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

6 sarama

3631

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 8.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

6 sarama

3696

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

3498

Ratio end mill RF 100 Ti

Ratio end mill RF 100 Ti. Designation: Ratio end mill RF 100 Ti, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

48 sarama

6464

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 sarama

6881

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

6848

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"f

10 sarama

6767

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

7 sarama

6762

Ratio end mill RF 100 AL 90°

Ratio end mill RF 100 AL 90°. Designation: Ratio end mill RF 100 AL 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

9 sarama

6763

Ratio end mill Superfinish RF 100 SF 90°

Ratio end mill Superfinish RF 100 SF 90°. Designation: Ratio end mill Superfinish RF 100 SF 90°, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

8 sarama

6883

Ratio roughing end mill RF 100 U

Ratio roughing end mill RF 100 U. Designation: Ratio roughing end mill RF 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

6 sarama

6700

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

7 sarama

5653

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

12 sarama

6799

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 6.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"at

5 sarama

6833

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

12 sarama

6847

Ball nose end mill G-Mold 55 B

Ball nose end mill G-Mold 55 B. Designation: Ball nose end mill G-Mold 55 B, Diameter range: 0.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

10 sarama

6870

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 sarama

6856

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 sarama

6734

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

6835

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

10 sarama

6858

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 sarama

6725

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"}

7 sarama

6801

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

7 sarama

6866

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

5 sarama

6463

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 10.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","

5 sarama

6730

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

7 sarama

6879

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 sarama

6877

Ratio roughing end mill RF 100 VA

Ratio roughing end mill RF 100 VA. Designation: Ratio roughing end mill RF 100 VA, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

12 sarama

6797

Ratio end mill RF 100 Diver (3-fluted)

Ratio end mill RF 100 Diver (3-fluted). Designation: Ratio end mill RF 100 Diver (3-fluted), Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"at

21 sarama

6480

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

14 sarama

6707

Ratio end mill RF 100 VA

Ratio end mill RF 100 VA. Designation: Ratio end mill RF 100 VA, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

9 sarama

6010

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

9 sarama

5745

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

12 sarama

6764

Ratio end mill RF 100 F 90°

Ratio end mill RF 100 F 90°. Designation: Ratio end mill RF 100 F 90°, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

9 sarama

6466

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 sarama

5729

Multi-tooth end mill GH 100 U

Multi-tooth end mill GH 100 U. Designation: Multi-tooth end mill GH 100 U, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 sarama

6867

Ratio end mill RF 100 Skyliner

Ratio end mill RF 100 Skyliner. Designation: Ratio end mill RF 100 Skyliner, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

7 sarama

6478

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

14 sarama

6821

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 sarama

6851

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

38 sarama

6868

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

7 sarama

6860

Ratio end mill RF 100 5 Speed

Ratio end mill RF 100 5 Speed. Designation: Ratio end mill RF 100 5 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

24 sarama

6716

Pilot end mill RF 100 P

Pilot end mill RF 100 P. Designation: Pilot end mill RF 100 P, Diameter range: 1.400 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

24 sarama

6709

Ratio end mill Superfinish RF 100 SF

Ratio end mill Superfinish RF 100 SF. Designation: Ratio end mill Superfinish RF 100 SF, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":

9 sarama

6706

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 sarama

6824

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partia

31 sarama

6766

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 sarama

6838

Torus end mill G-Mold 65 T

Torus end mill G-Mold 65 T. Designation: Torus end mill G-Mold 65 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

37 sarama

6832

Ball nose end mill G-Mold 65 B

Ball nose end mill G-Mold 65 B. Designation: Ball nose end mill G-Mold 65 B, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

12 sarama

6822

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 sarama

6837

Torus end mill G-Mold 65 T

Torus end mill G-Mold 65 T. Designation: Torus end mill G-Mold 65 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

37 sarama

6765

Ratio end mill RF 100 Speed M

Ratio end mill RF 100 Speed M. Designation: Ratio end mill RF 100 Speed M, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 sarama

6864

Ratio end mill RF 100 7 Speed

Ratio end mill RF 100 7 Speed. Designation: Ratio end mill RF 100 7 Speed, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 sarama

6732

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

6 sarama

6854

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

37 sarama

6803

Ratio end mill RF 100 Diver

Ratio end mill RF 100 Diver. Designation: Ratio end mill RF 100 Diver, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

19 sarama

6850

Torus end mill G-Mold 55 T

Torus end mill G-Mold 55 T. Designation: Torus end mill G-Mold 55 T, Diameter range: 0.500 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"

38 sarama

6820

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 sarama

5735

Standard Ratio end mill RF 100 U

Standard Ratio end mill RF 100 U. Designation: Standard Ratio end mill RF 100 U, Diameter range: 4.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

11 sarama

6823

Torus end mill G-Mold µ 65 T

Torus end mill G-Mold µ 65 T. Designation: Torus end mill G-Mold µ 65 T, Diameter range: 0.300 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

37 sarama

8234

Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"

8 sarama

6974

Ratio roughing end mill RF 100 AL

Ratio roughing end mill RF 100 AL. Designation: Ratio roughing end mill RF 100 AL, Diameter range: 6.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

6 sarama

6960

Ratio end mill RF 100 Speed P

Ratio end mill RF 100 Speed P. Designation: Ratio end mill RF 100 Speed P, Diameter range: 6.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

7 sarama

8070

Micro-precision milling cutter RF 100 AL

8065

Micro-precision milling cutter RF 100 AL

Micro-precision milling cutter RF 100 AL. Designation: Micro-precision milling cutter RF 100 AL, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{

30 sarama

185

Dies for UNF threads

Dies for UNF threads. Designation: Dies for UNF threads, Total length: 10.00 mm, EAN: 4031093009263, Cutting material: HSS, Surface: bright, Cutting direct

10 sarama

171

Dies for BSW threads

Dies for BSW threads. Designation: Dies for BSW threads, EAN: 4031093007832, Cutting material: HSS, Surface: bright, Cutting direction: Right-hand

1 sarama

140

Dies for ISO metric threads

Dies for ISO metric threads. Designation: Dies for ISO metric threads, Total length: 14.00 mm, EAN: 4031093003285, Cutting material: HSS, Surface: bright,

7 sarama

175

Dies for BSP threads

Dies for BSP threads. Designation: Dies for BSP threads, Total length: 10.00 mm, EAN: 4031093008303, Cutting material: HSS, Surface: bright, Tolerance clas

11 sarama

161

Dies for ISO metric fine threads

Dies for ISO metric fine threads. Designation: Dies for ISO metric fine threads, Total length: 10.00 mm, EAN: 4031093005289, Cutting material: HSS, Surface

24 sarama

139

Dies for ISO metric threads

Dies for ISO metric threads. Designation: Dies for ISO metric threads, Total length: 7.00 mm, EAN: 4031093003056, Cutting material: HSS, Surface: bright, T

8 sarama

182

Dies for UNC threads

Dies for UNC threads. Designation: Dies for UNC threads, Total length: 14.00 mm, EAN: 4031093008938, Cutting material: HSS, Surface: bright, Cutting direct

13 sarama

151

Dies for ISO metric threads

Dies for ISO metric threads. Designation: Dies for ISO metric threads, Total length: 25.00 mm, EAN: 4031093003834, Cutting material: HSS, Surface: bright,

28 sarama

162

Dies for ISO metric fine threads

Dies for ISO metric fine threads. Designation: Dies for ISO metric fine threads, Total length: 16.00 mm, EAN: 4031093006279, Cutting material: HSS, Surface

52 sarama

176

Dies for BSP threads

Dies for BSP threads. Designation: Dies for BSP threads, Total length: 22.00 mm, EAN: 4031093008563, Cutting material: HSS, Surface: bright, Tolerance clas

11 sarama

414

Bridge reamer

Bridge reamer. Designation: Bridge reamer, Diameter range: 6.400 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

29 sarama

415

Adjustable hand reamer

Adjustable hand reamer. Designation: Adjustable hand reamer, Diameter range: 4.000 mm – 59.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

56 sarama

131

Dies for ISO metric fine threads

Dies for ISO metric fine threads. Designation: Dies for ISO metric fine threads, Total length: 11.00 mm, EAN: 4031093002646, Cutting material: HSS-E, Surfa

2 sarama

130

Dies for ISO metric threads

Dies for ISO metric threads. Designation: Dies for ISO metric threads, Total length: 5.00 mm, EAN: 4031093002424, Cutting material: HSS-E, Surface: nitride

20 sarama

431

Stepped machine reamer with cutting pilot

Stepped machine reamer with cutting pilot. Designation: Stepped machine reamer with cutting pilot, Diameter range: 5.000 mm – 38.000 mm, TABLE_INFO_PASSON:

8 sarama

410

Machine taper reamer

Machine taper reamer. Designation: Machine taper reamer, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 sarama

411

Machine taper reamer

Machine taper reamer. Designation: Machine taper reamer, Diameter range: 5.000 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 sarama

408

Shell reamer

Shell reamer. Designation: Shell reamer, Diameter range: 25.000 mm – 100.000 mm, Internal diameter: 16.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"}

38 sarama

406

Quick helix reamer

Quick helix reamer. Designation: Quick helix reamer, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

30 sarama

407

Shell reamer

Shell reamer. Designation: Shell reamer, Diameter range: 26.000 mm – 100.000 mm, Internal diameter: 32.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"}

40 sarama

403

Quick helix reamer

Quick helix reamer. Designation: Quick helix reamer, Diameter range: 1.000 mm – 4.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"

14 sarama

409

Shell reamer

Shell reamer. Designation: Shell reamer, Diameter range: 25.000 mm – 98.000 mm, Internal diameter: 50.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

32 sarama

469

Quick helix reamer

Quick helix reamer. Designation: Quick helix reamer, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

21 sarama

727

Shell reamer

Shell reamer. Designation: Shell reamer, Diameter range: 25.000 mm – 75.000 mm, Internal diameter: 27.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

19 sarama

743

Stepped machine reamer with cutting pilot

Stepped machine reamer with cutting pilot. Designation: Stepped machine reamer with cutting pilot, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON:

5 sarama

455

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 12.030 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

75 sarama

490

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

96 sarama

6020

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 12.030 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

75 sarama

6019

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.500 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

28 sarama

301

Micro-precision drills without coolant ducts

80 sarama

6016

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

27 sarama

6017

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

99 sarama

6018

NC machine reamer

NC machine reamer. Designation: NC machine reamer, Diameter range: 0.970 mm – 12.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"f

80 sarama

1018

AeroX split point drill

AeroX split point drill. Designation: AeroX split point drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

133 sarama

6030

Short flute drill set

Short flute drill set. Designation: Short flute drill set, Diameter range: 1.0 - 10.5, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

1 sarama

693

Short flute drill

Short flute drill. Designation: Short flute drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"p

30 sarama

1137

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 6.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

3 sarama

311

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 1.100 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"}

25 sarama

634

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 7.800 mm – 49.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

25 sarama

635

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 8.000 mm – 31.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

6 sarama

623

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 10.000 mm – 31.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{

45 sarama

6999

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 6.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"a

1 sarama

6996

Spot weld drills

Spot weld drills. Designation: Spot weld drills, Diameter range: 8.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"part

3 sarama

464

Pilot for fine tolerances

Pilot for fine tolerances. Designation: Pilot for fine tolerances, Diameter range: 8.400 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

18 sarama

465

Pilot for medial tolerances

Pilot for medial tolerances. Designation: Pilot for medial tolerances, Diameter range: 9.000 mm – 39.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"a

19 sarama

466

Pilot for tapping size holes

Pilot for tapping size holes. Designation: Pilot for tapping size holes, Diameter range: 6.800 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{

24 sarama

533

Straight shank core drill

Straight shank core drill. Designation: Straight shank core drill, Diameter range: 3.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 9.400 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

14 sarama

514

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 5.900 mm – 17.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

10 sarama

505

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 4.200 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"-"},{"

52 sarama

541

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 9.000 mm – 22.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":

7 sarama

539

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 10.000 mm – 33.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

9 sarama

569

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 7.500 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

5 sarama

540

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 3.400 mm – 13.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

7 sarama

536

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 19.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

6 sarama

576

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 14.000 mm – 40.000 mm, TABLE

6 sarama

537

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 11.000 mm – 29.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

6 sarama

574

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 8.000 mm – 40.000 mm, TABLE_

9 sarama

555

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 5.000 mm – 31.600 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

31 sarama

538

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

7 sarama

561

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 2.400 mm – 5.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"attr

22 sarama

575

Stepped drill for centring according to DIN 332

Stepped drill for centring according to DIN 332. Designation: Stepped drill for centring according to DIN 332, Diameter range: 8.000 mm – 20.000 mm, TABLE_

6 sarama

534

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 7.400 mm – 50.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M

126 sarama

578

Aircraft extension drill, 12 inches long

Aircraft extension drill, 12 inches long. Designation: Aircraft extension drill, 12 inches long, Diameter range: 1.500 mm – 8.500 mm, TABLE_INFO_PASSON: [{

49 sarama

570

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 12.000 mm – 23.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

4 sarama

577

Aircraft extension drill, 6 inches long

Aircraft extension drill, 6 inches long. Designation: Aircraft extension drill, 6 inches long, Diameter range: 1.500 mm – 8.500 mm, TABLE_INFO_PASSON: [{"a

58 sarama

554

Straight shank drills double-ended

Straight shank drills double-ended. Designation: Straight shank drills double-ended, Diameter range: 1.450 mm – 10.500 mm, TABLE_INFO_PASSON: [{"attr":"P",

68 sarama

551

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 5.500 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

91 sarama

637

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 11.500 mm – 30.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

4 sarama

638

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"}

2 sarama

639

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 10.000 mm – 26.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

5 sarama

579

Aircraft extension drill, 6 inches long

Aircraft extension drill, 6 inches long. Designation: Aircraft extension drill, 6 inches long, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"a

58 sarama

580

Aircraft extension drill, 12 inches long

Aircraft extension drill, 12 inches long. Designation: Aircraft extension drill, 12 inches long, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{

54 sarama

636

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.600 mm – 17.200 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

5 sarama

656

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 6.200 mm – 20.640 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

20 sarama

666

Bushing drill

Bushing drill. Designation: Bushing drill, Diameter range: 1.000 mm – 13.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"-"},{"att

100 sarama

531

Taper pin drills

Taper pin drills. Designation: Taper pin drills, Diameter range: 1.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

13 sarama

532

Taper pin drills

Taper pin drills. Designation: Taper pin drills, Diameter range: 5.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

10 sarama

4282

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 sarama

4566

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 sarama

4283

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 sarama

4565

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

6 sarama

4390

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

8 sarama

4284

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 sarama

4684

StepPower combination drill tap

StepPower combination drill tap. Designation: StepPower combination drill tap, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{

6 sarama

303

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.160 mm – 1.950 mm, TABLE_INFO_PA

153 sarama

741

Morse taper shank subland drill

Morse taper shank subland drill. Designation: Morse taper shank subland drill, Diameter range: 15.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

1 sarama

729

Taper shank core drill

Taper shank core drill. Designation: Taper shank core drill, Diameter range: 19.000 mm – 40.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr

14 sarama

716

Masonry drill

Masonry drill. Designation: Masonry drill, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":

8 sarama

707

Carbide tipped spade drill

Carbide tipped spade drill. Designation: Carbide tipped spade drill, Diameter range: 3.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"}

8 sarama

4100

Deburring fork

Deburring fork. Designation: Deburring fork, Diameter range: 2.10 - 2.34, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"

15 sarama

3899

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.100 mm – 3.000 mm, TABLE_INFO_PA

289 sarama

6408

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 sarama

5652

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.100 mm – 3.000 mm, TABLE_INFO_PA

27 sarama

6400

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

55 sarama

6405

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 sarama

6401

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

55 sarama

6412

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 sarama

750

Straight shank core drill

Straight shank core drill. Designation: Straight shank core drill, Diameter range: 3.800 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{

11 sarama

701

Micro-precision drill AL without coolant ducts

Micro-precision drill AL without coolant ducts. Designation: Micro-precision drill AL without coolant ducts, Diameter range: 0.200 mm – 3.000 mm, TABLE_INF

65 sarama

739

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 4.500 mm – 11.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

5 sarama

738

Straight shank subland drill

Straight shank subland drill. Designation: Straight shank subland drill, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"parti

6 sarama

4101

Deburring fork

Deburring fork. Designation: Deburring fork, Diameter range: 3.70 - 4.24, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"

15 sarama

2873

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

5 sarama

2883

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 sarama

2885

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

11 sarama

2857

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

7 sarama

4858

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

9 sarama

8258

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

10 sarama

8260

Tap with coolant ducts for UNC threads

7 sarama

4598

MAS/BT DC hydro expansion chuck with axial plane

MAS/BT DC hydro expansion chuck with axial plane. Designation: MAS/BT DC hydro expansion chuck with axial plane, Internal diameter: 18.00 mm, TABLE_INFO_PA

8 sarama

4577

Synchro tapping chuck MAS/BT for internal cooling

Synchro tapping chuck MAS/BT for internal cooling. Designation: Synchro tapping chuck MAS/BT for internal cooling, Diameter range: 6.0 - 16.0, Internal dia

7 sarama

4597

SK hydro expansion chuck, slim design 3°

SK hydro expansion chuck, slim design 3°. Designation: SK hydro expansion chuck, slim design 3°, Internal diameter: 8.00 mm, TABLE_INFO_PASSON: [{"attr":"P

16 sarama

4601

Synchro tapping chuck HSK-A for internal cooling

Synchro tapping chuck HSK-A for internal cooling. Designation: Synchro tapping chuck HSK-A for internal cooling, Internal diameter: 32.00 mm, TABLE_INFO_PA

9 sarama

4561

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 10.00 mm, TABLE_INFO_

10 sarama

4564

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 14.

27 sarama

4563

MQL HSK-A shrink fit chuck for manual tool change

MQL HSK-A shrink fit chuck for manual tool change. Designation: MQL HSK-A shrink fit chuck for manual tool change, Internal diameter: 18.00 mm, TABLE_INFO_

27 sarama

4562

MQL HSK-A shrink fit chuck for automatic tool change cycle

MQL HSK-A shrink fit chuck for automatic tool change cycle. Designation: MQL HSK-A shrink fit chuck for automatic tool change cycle, Internal diameter: 32.

10 sarama

28487

Aluminium milling cutter with indexable inserts, screw-in threads

Aluminium milling cutter with indexable inserts, screw-in threads. Designation: Aluminium milling cutter with indexable inserts, screw-in threads, Diameter

3 sarama

28486

Aluminium milling cutter with indexable inserts, shell milling cutter

Aluminium milling cutter with indexable inserts, shell milling cutter. Designation: Aluminium milling cutter with indexable inserts, shell milling cutter,

4 sarama

4230

MAS/BT milling arbor

MAS/BT milling arbor. Designation: MAS/BT milling arbor, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"

31 sarama

25911

Torx Plus screwdiver

Torx Plus screwdiver. Designation: Torx Plus screwdiver, Total length: 73.40 mm, EAN: 4049844612136, Indicator new/addition: New, Standard: Company std.

1 sarama

4868

Socket

Socket. Designation: Socket, Total length: 22.00 mm, EAN: 4049844787308, Indicator new/addition: New

5 sarama

4869

Pull stud

Pull stud. Designation: Pull stud, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

6 sarama

4889

Pull stud

Pull stud. Designation: Pull stud, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"},{"attr":

6 sarama

4203

Coolant distribution screw

Coolant distribution screw. Designation: Coolant distribution screw, Total length: 58.00 mm, EAN: 4049844229839, Indicator new/addition: Addition, Standard

8 sarama

8170

Mounting key BT 800

Mounting key BT 800. Designation: Mounting key BT 800, EAN: 4049844972889, Indicator new/addition: New, Standard: Company std.

17 sarama

8192

Countersink holder with depth stop

Countersink holder with depth stop. Designation: Countersink holder with depth stop, Internal diameter: 10.00 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"

1 sarama

8358

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

8357

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

8336

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 sarama

8359

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

11 sarama

8343

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 sarama

8344

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 sarama

8334

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

8335

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

8364

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

11 sarama

8366

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

11 sarama

25930

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

3 sarama

25914

Torx clamping screw

Torx clamping screw. Designation: Torx clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N"

3 sarama

8313

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 sarama

8314

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

10 sarama

28401

Clamping screw

Clamping screw. Designation: Clamping screw, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"-"

3 sarama

6174

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 sarama

6176

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 6.350 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

6 sarama

6175

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.590 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

9 sarama

6924

Ball nose end mill (4-fluted)

Ball nose end mill (4-fluted). Designation: Ball nose end mill (4-fluted), Diameter range: 1.590 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

19 sarama

28485

Aluminium milling cutter with indexable inserts, straight shank

Aluminium milling cutter with indexable inserts, straight shank. Designation: Aluminium milling cutter with indexable inserts, straight shank, Diameter ran

2 sarama

4525

Synchro tapping chuck with straight shank for internal cooling

Synchro tapping chuck with straight shank for internal cooling. Designation: Synchro tapping chuck with straight shank for internal cooling, Diameter range

8 sarama

8346

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 sarama

8341

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 sarama

8347

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 sarama

8342

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

8 sarama

8337

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 sarama

8333

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

8332

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 sarama

8355

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 sarama

8345

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 sarama

8339

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 sarama

8338

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 sarama

8331

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

16 sarama

8356

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

10 sarama

8360

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 sarama

1919

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

14 sarama

8367

Machine tap for UNC-threads

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 sarama

8361

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 sarama

2441

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

15 sarama

1904

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

10 sarama

8368

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

16 sarama

8365

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

13 sarama

8362

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"ful

15 sarama

2863

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"partial"},{"attr":"M","val":"

8 sarama

313

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"par

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

18 sarama

805

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

12 sarama

8264

Tap with coolant ducts for UNC threads

Tap with coolant ducts for UNC threads. Designation: Tap with coolant ducts for UNC threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

5 sarama

8286

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"partial"},{"attr":"

12 sarama

852

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

29 sarama

8265

Tap with coolant ducts for UNF threads

Tap with coolant ducts for UNF threads. Designation: Tap with coolant ducts for UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

5 sarama

6557

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

16 sarama

8282

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

17 sarama

6565

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

Machine tap for UNC-threads. Designation: Machine tap for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K",

17 sarama

8081

Machine tap for ISO metric threads

Machine tap for ISO metric threads. Designation: Machine tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"

11 sarama

8363

Machine tap for ISO metric fine threads

Machine tap for ISO metric fine threads. Designation: Machine tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","v

33 sarama

5691

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

44 sarama

5694

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 sarama

5693

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

42 sarama

5692

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

51 sarama

5682

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 sarama

5688

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 25.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

44 sarama

5164

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 3.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

51 sarama

5681

Single-fluted gun drill EB 80 XXL

Single-fluted gun drill EB 80 XXL. Designation: Single-fluted gun drill EB 80 XXL, Diameter range: 4.000 mm – 32.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

48 sarama

28504

SOLX indexable insert, single-sided external

SOLX indexable insert, single-sided external. Designation: SOLX indexable insert, single-sided external, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

8 sarama

28505

SOLX indexable insert, single-sided external

SOLX indexable insert, single-sided external. Designation: SOLX indexable insert, single-sided external, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

8 sarama

26820

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

5 sarama

26824

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 sarama

26907

Cutting insert for drilling and boring

Cutting insert for drilling and boring. Designation: Cutting insert for drilling and boring, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 sarama

26816

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 sarama

26826

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 sarama

27291

Cutting insert for drilling and boring

Cutting insert for drilling and boring. Designation: Cutting insert for drilling and boring, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val

4 sarama

26818

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

4 sarama

26822

Cutting insert

Cutting insert. Designation: Cutting insert, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":"full"},{"attr":"K","val":"-"},{"attr":"N","va

5 sarama

6496

Pilot drill without coolant ducts

Pilot drill without coolant ducts. Designation: Pilot drill without coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","va

47 sarama

495

90° Front/back deburrer

90° Front/back deburrer. Designation: 90° Front/back deburrer, Diameter range: 2.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":

29 sarama

6166

Ball nose end mill G-Mold 55 B short shank

Ball nose end mill G-Mold 55 B short shank. Designation: Ball nose end mill G-Mold 55 B short shank, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON

6 sarama

8292

Machine tap for UNF-threads

Machine tap for UNF-threads. Designation: Machine tap for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":

7 sarama

6578

Coolant duct tap for ISO metric fine threads

Coolant duct tap for ISO metric fine threads. Designation: Coolant duct tap for ISO metric fine threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr"

5 sarama

6577

Coolant duct tap for ISO metric fine threads

9 sarama

8085

Coolant duct tap for ISO metric threads

Coolant duct tap for ISO metric threads. Designation: Coolant duct tap for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

9 sarama

6829

Micro-precision milling cutter MicroMill µ 55 U

Micro-precision milling cutter MicroMill µ 55 U. Designation: Micro-precision milling cutter MicroMill µ 55 U, Diameter range: 0.200 mm – 3.000 mm, TABLE_I

45 sarama

6149

Thread milling cutter for UNF-threads

Thread milling cutter for UNF-threads. Designation: Thread milling cutter for UNF-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

10 sarama

4477

Micro thread milling cutter for ISO metric threads

Micro thread milling cutter for ISO metric threads. Designation: Micro thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":

11 sarama

6148

Thread milling cutter for UNC-threads

Thread milling cutter for UNC-threads. Designation: Thread milling cutter for UNC-threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr":"M","val":

10 sarama

4880

Micro thread milling cutter for UNC/UNF threads

Micro thread milling cutter for UNC/UNF threads. Designation: Micro thread milling cutter for UNC/UNF threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"

24 sarama

6469

Ratio end mill set RF 100 Sharp extra short

Ratio end mill set RF 100 Sharp extra short. Designation: Ratio end mill set RF 100 Sharp extra short, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"at

1 sarama

6808

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

19 sarama

6167

Ball nose end mill G-Mold 55 B short shank

Ball nose end mill G-Mold 55 B short shank. Designation: Ball nose end mill G-Mold 55 B short shank, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON

6 sarama

6165

Ratio end mill RF 100 Sharp short shank

Ratio end mill RF 100 Sharp short shank. Designation: Ratio end mill RF 100 Sharp short shank, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"a

5 sarama

6468

Ratio end mill set RF 100 Sharp extra short

Ratio end mill set RF 100 Sharp extra short. Designation: Ratio end mill set RF 100 Sharp extra short, Diameter range: 6.0 - 12.0, TABLE_INFO_PASSON: [{"at

1 sarama

6164

Ratio end mill RF 100 Sharp short shank

Ratio end mill RF 100 Sharp short shank. Designation: Ratio end mill RF 100 Sharp short shank, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{"a

5 sarama

6691

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

54 sarama

6163

Ratio end mill RF 100 Sharp extra short short shank

Ratio end mill RF 100 Sharp extra short short shank. Designation: Ratio end mill RF 100 Sharp extra short short shank, Diameter range: 0.800 mm – 3.000 mm,

11 sarama

6809

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

15 sarama

6692

Ratio end mill RF 100 Micro Diver

Ratio end mill RF 100 Micro Diver. Designation: Ratio end mill RF 100 Micro Diver, Diameter range: 0.500 mm – 3.175 mm, TABLE_INFO_PASSON: [{"attr":"P","va

52 sarama

9039

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 sarama

9033

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 sarama

9029

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

7 sarama

9031

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 sarama

9026

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 sarama

9051

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 sarama

9042

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 sarama

9047

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

6 sarama

9046

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 sarama

9030

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 sarama

9035

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 sarama

9045

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 sarama

9041

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 sarama

9034

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 sarama

9002

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 sarama

9014

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 sarama

9038

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 sarama

9010

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

10 sarama

9032

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 sarama

9006

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

13 sarama

9022

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

10 sarama

9037

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

11 sarama

9018

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

4 sarama

9043

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

5 sarama

9044

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

3 sarama

9036

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.600 mm – 3.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

12 sarama

9040

DENTAL ball nose cutters

DENTAL ball nose cutters. Designation: DENTAL ball nose cutters, Diameter range: 0.500 mm – 2.500 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M

8 sarama

9197

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

42 sarama

9195

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 sarama

9194

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 sarama

9198

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

42 sarama

9193

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 sarama

9191

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 14.000 mm, TABLE_INFO_PASSON: [{"attr":"P

33 sarama

9190

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P

22 sarama

9196

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P

45 sarama

9192

Single-fluted gun drill EB 80 CROSS

Single-fluted gun drill EB 80 CROSS. Designation: Single-fluted gun drill EB 80 CROSS, Diameter range: 3.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P

41 sarama

6060

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

64 sarama

5234

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

97 sarama

5689

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

97 sarama

5690

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

64 sarama

5812

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"par

93 sarama

5639

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 sarama

5669

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 sarama

5641

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 sarama

5460

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 sarama

5023

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 sarama

5018

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 sarama

6061

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 sarama

5022

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 sarama

5642

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.919 mm – 15.950 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

64 sarama

5640

Single-fluted gun drill EB 80

Single-fluted gun drill EB 80. Designation: Single-fluted gun drill EB 80, Diameter range: 3.969 mm – 25.400 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

97 sarama

4605

Reduction sleeve for hydro synchro tapping chucks

Reduction sleeve for hydro synchro tapping chucks. Designation: Reduction sleeve for hydro synchro tapping chucks, Diameter range: 4.005 mm – 32.000 mm, In

84 sarama

4606

Reduction sleeve for hydro synchro tapping chucks

Reduction sleeve for hydro synchro tapping chucks. Designation: Reduction sleeve for hydro synchro tapping chucks, Diameter range: 12.000 mm – 32.000 mm, I

77 sarama

26700

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 sarama

26702

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

5 sarama

26703

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

5 sarama

26104

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 sarama

26701

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 sarama

26106

Square shank holder straight, for external machining with IC

Square shank holder straight, for external machining with IC. Designation: Square shank holder straight, for external machining with IC, TABLE_INFO_PASSON:

6 sarama

26105

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 sarama

26107

Square shank holder, straight, external machining without IC

Square shank holder, straight, external machining without IC. Designation: Square shank holder, straight, external machining without IC, TABLE_INFO_PASSON:

6 sarama

26202

Reinforced parting off blade without IC

Reinforced parting off blade without IC. Designation: Reinforced parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 sarama

26207

Reinforced parting off blade with IC

Reinforced parting off blade with IC. Designation: Reinforced parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

2 sarama

26203

Reinforced parting off blade without IC

Reinforced parting off blade without IC. Designation: Reinforced parting off blade without IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val"

2 sarama

26206

Reinforced parting off blade with IC

Reinforced parting off blade with IC. Designation: Reinforced parting off blade with IC, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},

2 sarama

6095

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 5.556 mm, TABLE_INFO_PASSON: [{"att

44 sarama

6094

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"att

55 sarama

6092

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

79 sarama

6091

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"at

79 sarama

6093

Single-fluted gun drill EB 100 M STEEL

Single-fluted gun drill EB 100 M STEEL. Designation: Single-fluted gun drill EB 100 M STEEL, Diameter range: 2.000 mm – 10.319 mm, TABLE_INFO_PASSON: [{"at

71 sarama

5633

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

35 sarama

5647

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

50 sarama

5024

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 0.900 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

26 sarama

5684

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 0.900 mm – 2.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

15 sarama

5020

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

35 sarama

5632

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.000 mm – 4.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

25 sarama

5026

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

29 sarama

5648

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

37 sarama

5021

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"pa

38 sarama

5638

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 8.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

38 sarama

6075

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 6.500 mm, TABLE_INFO_PASSON: [{"attr":"P"

51 sarama

5685

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

77 sarama

5687

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 7.144 mm, TABLE_INFO_PASSON: [{"attr":"P","val"

37 sarama

5686

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 10.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

50 sarama

5646

Single-fluted gun drill EB 100 M

Single-fluted gun drill EB 100 M. Designation: Single-fluted gun drill EB 100 M, Diameter range: 1.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

77 sarama

6072

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 sarama

6071

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 sarama

5637

Single-fluted gun drill EB 100

Single-fluted gun drill EB 100. Designation: Single-fluted gun drill EB 100, Diameter range: 1.500 mm – 6.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"fu

29 sarama

6074

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 8.731 mm, TABLE_INFO_PASSON: [{"attr":"P"

64 sarama

6073

Single-fluted gun drill EB 100 M AL

Single-fluted gun drill EB 100 M AL. Designation: Single-fluted gun drill EB 100 M AL, Diameter range: 2.000 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P

79 sarama

6062

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

146 sarama

6063

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

146 sarama

6064

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-

138 sarama

6407

Step ratio drill with coolant ducts

Step ratio drill with coolant ducts. Designation: Step ratio drill with coolant ducts, Diameter range: 6.000 mm – 18.000 mm, TABLE_INFO_PASSON: [{"attr":"P

16 sarama

7052

Ratio drill without coolant ducts

Ratio drill without coolant ducts. Designation: Ratio drill without coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","v

127 sarama

6591

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [

124 sarama

6589

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

191 sarama

8512

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 sarama

8514

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 sarama

8518

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

148 sarama

8513

Ratio drill with coolant ducts

Ratio drill with coolant ducts. Designation: Ratio drill with coolant ducts, Diameter range: 3.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"p

205 sarama

6590

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [

191 sarama

6592

Ratio drill with coolant ducts, 3-fluted

Ratio drill with coolant ducts, 3-fluted. Designation: Ratio drill with coolant ducts, 3-fluted, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [

124 sarama

4870

Thread milling cutter for ISO metric threads

Thread milling cutter for ISO metric threads. Designation: Thread milling cutter for ISO metric threads, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"at

18 sarama

6939

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 3.500 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

22 sarama

6459

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

83 sarama

6461

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 4.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

83 sarama

6457

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 4.000 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

77 sarama

6951

Circular milling cutter full radius

Circular milling cutter full radius. Designation: Circular milling cutter full radius, Diameter range: 3.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"attr":"P

13 sarama

6815

Ball nose end mill G-Mold µ 65 B

Ball nose end mill G-Mold µ 65 B. Designation: Ball nose end mill G-Mold µ 65 B, Diameter range: 0.200 mm – 12.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val

19 sarama

6949

Circular milling cutter corner chamfer

Circular milling cutter corner chamfer. Designation: Circular milling cutter corner chamfer, Diameter range: 3.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"at

12 sarama

6950

Circular milling cutter corner radius

Circular milling cutter corner radius. Designation: Circular milling cutter corner radius, Diameter range: 7.800 mm – 11.800 mm, TABLE_INFO_PASSON: [{"attr

11 sarama

6172

90° Chamfering milling cutter

90° Chamfering milling cutter. Designation: 90° Chamfering milling cutter, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"ful

13 sarama

6713

90° Chamfering milling cutter

30 sarama

6456

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 0.800 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

135 sarama

6458

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

119 sarama

6550

Micro HPC milling cutter

Micro HPC milling cutter. Designation: Micro HPC milling cutter, Diameter range: 0.300 mm – 16.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},{"attr

30 sarama

6460

Ratio end mill RF 100 Sharp

Ratio end mill RF 100 Sharp. Designation: Ratio end mill RF 100 Sharp, Diameter range: 1.000 mm – 20.000 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"full"},

119 sarama

6938

Ratio end mill RF 100 Sharp extra short

Ratio end mill RF 100 Sharp extra short. Designation: Ratio end mill RF 100 Sharp extra short, Diameter range: 0.800 mm – 16.000 mm, TABLE_INFO_PASSON: [{"

33 sarama

8148

Promotion – Modular drill with interchangeable head BT 800 3xD

Promotion – Modular drill with interchangeable head BT 800 3xD. Designation: Promotion – Modular drill with interchangeable head BT 800 3xD, Diameter range

161 sarama

8149

Promotion – Modular drill with interchangeable head BT 800 5xD

Promotion – Modular drill with interchangeable head BT 800 5xD. Designation: Promotion – Modular drill with interchangeable head BT 800 5xD, Diameter range

161 sarama

6162

Micro-precision drill without coolant ducts with short shank

Micro-precision drill without coolant ducts with short shank. Designation: Micro-precision drill without coolant ducts with short shank, Diameter range: 0.

55 sarama

6161

Micro-precision drill without coolant ducts with short shank

Micro-precision drill without coolant ducts with short shank. Designation: Micro-precision drill without coolant ducts with short shank, Diameter range: 0.

55 sarama

6488

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

52 sarama

7053

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.800 mm – 3.000 mm, TABLE_INFO_PA

45 sarama

6489

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 sarama

6487

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

66 sarama

6493

Micro-precision drill XL with coolant ducts

Micro-precision drill XL with coolant ducts. Designation: Micro-precision drill XL with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASS

47 sarama

6491

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 sarama

6490

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

46 sarama

6494

Micro-precision drill XL with coolant ducts

Micro-precision drill XL with coolant ducts. Designation: Micro-precision drill XL with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASS

47 sarama

8525

Micro-precision drills without coolant ducts

Micro-precision drills without coolant ducts. Designation: Micro-precision drills without coolant ducts, Diameter range: 0.500 mm – 3.000 mm, TABLE_INFO_PA

61 sarama

8526

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 sarama

8528

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 sarama

8527

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

47 sarama

6045

Straight-fluted drill, 4-fluted VB 100 P

Straight-fluted drill, 4-fluted VB 100 P. Designation: Straight-fluted drill, 4-fluted VB 100 P, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [

77 sarama

6044

Straight-fluted drill, 4-fluted VB 100 P

Straight-fluted drill, 4-fluted VB 100 P. Designation: Straight-fluted drill, 4-fluted VB 100 P, Diameter range: 6.000 mm – 32.000 mm, TABLE_INFO_PASSON: [

77 sarama

6497

Micro-precision drill with coolant ducts

Micro-precision drill with coolant ducts. Designation: Micro-precision drill with coolant ducts, Diameter range: 1.000 mm – 3.000 mm, TABLE_INFO_PASSON: [{

50 sarama

DEMO-RT100U

Machine tap RT 100 U, universal

Universal machine tap for through and blind holes in a wide range of materials. Spiral point and spiral flute versions available.

5 sarama

DEMO-6497

Solid carbide drill 5xD, internal coolant

High-performance solid carbide drill for steel and cast iron. Four-facet point, internal coolant channels, TiAlN coating. Suitable for depths up to 5xD.

5 sarama