Ratio end mill RF 100 AL

Ratio end mill RF 100 AL. Designation: Ratio end mill RF 100 AL, Diameter range: 3.175 mm – 19.050 mm, TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}], EAN: 4049844202368, Cutting material: Solid carbide, Surface: bright, Product family: RF 100 A, Type: W, Helix angle: 39/40/41, Back rake angle: 10, Length picto milling: long, Number of cutting edges range (from/to): 3, Type of machine interface: ~HA/~HB, Corner design: Schneidecke 90°, Feed direction: with drilling

Diti gari beká

EAN: 4049844202368
Type: W
Surface: bright
Designation: Ratio end mill RF 100 AL
Helix angle: 39/40/41
Corner design: Schneidecke 90°
Diameter range: 3.175 mm – 19.050 mm
Feed direction: with drilling
Product family: RF 100 A
Back rake angle: 10
Cutting material: Solid carbide
TABLE_INFO_PASSON: [{"attr":"P","val":"-"},{"attr":"M","val":"-"},{"attr":"K","val":"-"},{"attr":"N","val":"full"},{"attr":"S","val":"-"},{"attr":"H","val":"-"}]
Length picto milling: long
Type of machine interface: ~HA/~HB
Number of cutting edges range (from/to): 3

Bogo a namba kosa

Namba oda	Flute length	Shank length	Total length	Shank diameter	Nominal diameter	Reko mitia
6775 12.700	41.75 mm	45.20 mm	88.90 mm	12.70 mm	12.70 mm	Benunu da
6775 6.350	26.05 mm	37.45 mm	63.50 mm	6.35 mm	6.35 mm	Benunu da
6775 9.520	33.40 mm	30.10 mm	63.50 mm	9.53 mm	9.53 mm	Benunu da
6775 3.170	15.70 mm	35.10 mm	50.80 mm	3.17 mm	3.17 mm	Benunu da
6775 15.870	42.75 mm	48.40 mm	88.90 mm	15.88 mm	15.88 mm	Benunu da
6775 19.050	52.10 mm	51.60 mm	101.60 mm	19.05 mm	19.05 mm	Benunu da
6775 7.940	27.64 mm	35.86 mm	63.50 mm	7.94 mm	7.94 mm	Benunu da
6775 4.760	19.87 mm	30.93 mm	50.80 mm	4.76 mm	4.76 mm	Benunu da